N. N. Maldar

Synthesis and characterization of processable heat resistant co-poly(ester-amide)s containing cyclopentylidene moiety

ABSTRACT New cyclopentylidene ring-containing diamino-diesters, 1,1-bis(3-aminobenzoyloxy phenyl) cyclopentane, was prepared through reaction of cyclopentanone with two moles of phenol to yield 1,1-bis (4-hydroxy phenyl) cyclopentane (BHPP) (I), the resulting diol (I) on reaction with 3-nitrobenzoyl chloride in N,N-dimethyl acetamide (DMAc) and triethyl amine yield 1,1-bis(3-nitrobenzoyloxy phenyl) cyclopentane (II) which on finally reduced by catalytic hydrogenation in presence of 10% Pd/C in DMAc and stirred at room temperature under a 4 kg/cm2 hydrogen pressure yields 1,1-bis(3-aminobenzoyloxy phenyl) cyclopentane (III) (m-BABPP). The structure of novel m-diester-diamine was confirmed by FT-IR, 1H-NMR and 13C-NMR. A series of new m-poly (ester-amide)s and co-poly(ester-amide)s were synthesized by using the solution polycondensation method of novel diamine (III) with IPC and TPC in various mole proportion. These novel polymers were characterized by FTIR spectroscopy, solubility, inherent viscosity and thermal analysis and XRD studies. Inherent viscosities of these polymers were in the range 0.30 to 0.46 dL/g indicating moderate molecular weight built-up. These polymers exhibited excellent solubility in various polar aprotic solvents such as NMP, Pyridine. These polymers were partially soluble in DMSO, DMAc, DMF etc. X-Ray diffraction pattern of polymers showed that introduction of cardo moiety containing ester linkage would disturb the chain regularity and packing, leading to amorphous nature. Thermal analysis by TGA showed excellent thermal stability of polymers. The structure -property correlation among these poly(ester-amide)s were studied, in view of these polymers potential applications as processable high temperature resistance materials.

Aromatic poly(amide-hydrazide)s: Synthesis and Characterization

Aromatic poly(amide-hydrazide)s contain a higher percentage of polar group in the polymer backbone and represent a technologically important class of high performance material exhibiting high thermal, mechanical and chemical stability. The present investigation deals with the synthesis of various new poly(amide-hydrazide)s and copolymers from new novel aromatic dicarboxylic acid i.e., 2,5-bis(4-carboxymethylene phenyl) 3,4-diphenyl thiophene (BCMPDT) and/or terephthalic acid with m-amino-and p- aminobenzhydrazide by Yamazakis phosphorylation method. BCMPDT was characterized by spectroscopic techniques such as IR, NMR, and mass. Polymers were characterized by IR spectroscopy, solubility, inherent viscosity, thermal analysis (DSC, TGA), and X-ray diffraction studies. These poly(amide-hydrazide)s had inherent viscosities in the range of 0.18–0.96 dL/g in DMSO at 30°C and showed good solubility in aprotic polar solvents. The polymers could be cast into transparent films and showed Tmax in the range of 520–640°C. The structure property correlation for the series of poly(amide-hydrazide)s synthesized was studied in detail.

Synthesis and characterization of thermally stable poly(ether-azomethine)s derived from 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane

ABSTRACT A new dialdehyde 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane (BBMPC) was synthesized starting from cyclopentanone and O-cresol to give 1,1-bis(4-hydroxy-3-methyl phenyl)cyclopentane (BHMPC); followed by reaction with 4-fluorobenzaldehyde in N, N-dimethyl formamide (DMF), containing anhydrous potassium carbonate. New series of poly(ether-azomethine)s were synthesized from (BBMPC) with different diamines such as 4,4′- diamino diphenyl ether (ODA); 4,4′-diaminodiphenyl methane (MDA); 4-aminophenyl sulfone (SDA); p-phenylene diamines (p-PDA), etc. in N, N’- dimethyl acetamide (DMAc) with 5 wt% LiCl by the solution polycondensation method. Inherent viscosities of these polymers were in the range 0.20 to 0.38 dL/g indicating formation of moderate molecular weights. These polymers exhibited good solubility in various polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), DMAc, DMF, etc. However some polymers showed partial solubility in DMF and DMAc. X-Ray diffraction pattern of polymers showed amorphous nature. Thermal stability was assessed by 10% weight loss temperature and the degradation temperature of the resultant polymers falls in the ranges from 444-501°C in nitrogen. The glass transition temperature was in the range of 155-205°C. The structure-property correlation among these polyazomethines were studied; in view of their potential applications as high performance polymers.

High Performance Poly(ether-amide)s Derived from 1,1-Bis[4-(4-carboxy methylene phenoxy)-3-methyl phenyl] Cyclopentane and Aromatic Diamines

A series of new methyl substituted poly(ether-amide)s were synthesized by using direct Yamazaki’s phosphorylative polycondensation of novel diacid 1,1-bis[4-(4-carboxymethyl phenoxy)-3-methylphenyl] cyclopentane (BCMMP) with various aromatic diamines. These polymers were characterized by FTIR spectroscopy. Inherent viscosities of these polymers were in the range 0.25 to 0.42 dL/g indicating moderate molecular weight built-up. These polymers exhibited excellent solubility in various polar aprotic solvents such as NMP, DMSO, DMAc, DMF, pyridine, and were insoluble in THF, DCM and chloroform. X-Ray diffraction pattern of polymers showed that incorporation of methyl substituent on aromatic backbone and cardo cyclopentylidene moiety containing ether linkage and methylene spacer would disturb the chain regularity and packing, leading to amorphous nature. Thermal analysis by TGA showed excellent thermal stability of polymers. The glass transition temperature Tg were in the range 195–210°C. The structure-property correlation among this poly(ether-amide)s was studied, in view of these polymer’s potential applications as high performance polymers.