N. S. Shahabuddin

Spacing-Switchable Multiwavelength Fiber Laser Based on Nonlinear Polarization Rotation and Brillouin Scattering in Photonic Crystal Fiber

A new spacing-switchable multiwavelength erbium-doped fiber laser (EDFL) is demonstrated using switchable nonlinear polarization rotation (NPR) and stimulated Brillouin scattering (SBS) effects. The laser employs a 100-m-long photonic crystal fiber in conjunction with a four-port circulator in a figure-of-eight arrangement to provide the intensity-dependent transmission effect, as well as to discriminate the even-order and odd-order Brillouin Stokes to have a double-frequency Brillouin Stokes output. Without the Brillouin pump (BP), the laser operates in an NPR mode to produce at least 22 lasing wavelengths with a side mode suppression ratio of more than 10 dB and a wavelength spacing of 0.27 nm. In the Brillouin erbium fiber laser mode, at least 30 Brillouin lines with a spacing of 0.16 nm are obtained at BP power of 3 dBm and 980-nm pump power of 120 mW.

Performance Comparison of Mode-Locked Erbium-Doped Fiber Laser with Nonlinear Polarization Rotation and Saturable Absorber Approaches

A mode-locked erbium-doped fiber laser (EDFL) is demonstrated using a highly concentrated erbium-doped fiber (EDF) as the gain medium in a ring configuration with and without a saturable absorber (SA). Without the SA, the proposed laser generates soliton pulses with a repetition rate of 12 MHz, pulse width of 1.11 ps and energy pulse of 1.6 pJ. By incorporating SA in the ring cavity, the optical output of the laser changes from soliton to stretched pulses due to the slight change in the group velocity dispersion. With the SA, a cleaner pulse is obtained with a repetition rate of 11.3 MHz, a pulse width of 0.58 ps and a pulse energy of 2.3 pJ.

Wideband Spectrum-Sliced ASE Source Operating at 1900-nm Region Based on a Double-Clad Ytterbium-Sensitized Thulium-Doped Fiber

A wideband spectrum-sliced amplified spontaneous emission (ASE) source operating in 1900-nm region is demonstrated using a newly developed double-clad ytterbium-sensitized thulium-doped fiber (YTF) and a Sagnac loop mirror. The YTF used was drawn from a D-shape preform, which was fabricated using the modified chemical vapor deposition (MCVD) and solution doping technique. The YTF was pumped by a 980-nm multimode laser to generate an ASE at 1900 nm through the transition of thulium ion from 3F4 to 3H6 with the assistance of ytterbium to thulium ion energy transfer. The broadband ASE was spectral sliced by the loop mirror, which was constructed using a 3-dB coupler and a piece of polarization maintaining fiber (PMF). A wideband comb with channel spacing of 3.3 nm and an extinction ratio of 9 dB was achieved with a multimode pump power of 1 W within a wavelength range of more than 300 nm. The center of the comb spectrum was at 1888 nm with peak power of around -53 dBm.

A linear cavity brillouin/bismuth-based erbium-doped fiber laser with enhanced characteristics

A new linear cavity BEFL configuration for increased Stokes-line generation is proposed and demonstrated utilizing a 2 × 2 coupler at the end of the linear cavity. The proposed linear cavity is able to generate up to 33 Stokes lines in the 1590-nm region at a channel spacing of 0.089 nm. The Stokes lines are generated at a BP power of 4 dBm and a 1480-nm pump power of 100 mW. The number of Stokes generated by the proposed BELF is higher compared to conventional BEFL configurations in which the 2 × 2 coupler is placed in the middle of the linear cavity. The number of Stokes lines generated is observed to depend on the 1480-nm pump power as well as the operating wavelength region, which must be as close as possible to the lasing bandwidth of the free-running BEFL. The proposed multiwavelength BEFL is able to operate stably at room temperatures and is also compact due to the use of a 215-cm bismuth-based EDF as the linear gain medium.

Multi-wavelength fiber laser based on nonlinear polarization rotation in semiconductor optical amplifier and photonic crystal fiber

A nonlinear polarisation rotation (NPR) based multi-wavelength laser source is demonstrated using a semiconductor optical amplifier (SOA) and photonic crystal fiber (PCF). The SOA acts as not only the gain medium but also the phase retarder for multi-wavelength oscillation in conjunction with an isolator. The incorporation of PCF improves the NPR effect and thus assists in the multiwavelength generation. The wavelength spacing reduces from 4.82 to 2.76 nm as the PCF length increases from 50 to 100 m. With a 100 m long PCF, the proposed laser produces at least 42 lasing wavelengths with optical signal to noise ratio of more than 10 dB.

Multi-wavelength erbium-doped fiber laser using four-wave mixing effect in doped fiber

We demonstrate a multi-wavelength erbium-doped fiber laser (EDFL) using erbium gain and four-wave mixing (FWM) effect in a piece of erbium-doped fiber (EDF) with high erbium ion concentration. The EDF has a pump absorption rate of 24.6 dB/m at 979 nm and is bi-directionally pumped by 980-nm laser diodes. FWM effect redistributes the energy of different oscillating lines and causes multi-wavelength operation. The laser generates more than 22 lines of optical comb with a line spacing of approximately 0.10 nm at the 1569-nm region using only 1.5-m-long EDF.

Photonic crystal fiber-based multi-wavelength Brillouin fiber laser with dual-pass amplification configuration

A simple technique for achieving a stable, room temperature and multi-wavelength lasing with narrow linewidth is demonstrated using Brillouin fiber laser (BFL) with a 100-m-long photonic crystal fiber (PCF) in conjunction with a dual-pass configuration. A broadband fiber Bragg grating (FBG) operating in the C-band region is incorporated at the end side of the setup to allow a dual-pass operation. The proposed BFL can operate at any wavelength depending on the Brillouin pump wavelength and the FBGs reflection region used. With a Brillouin pump (BP) of 15.7 dBm, approximately 7 Stokes and 4 anti-Stokes lines are obtained with a line spacing of 0.08 nm.

Multi-wavelength ytterbium doped fiber laser based on longitudinal mode interference

Multi-wavelength Ytterbium-doped fiber laser (YDFL) is demonstrated using a longitudinal mode interference assisted by a four-wave mixing (FWM) effect in a ring laser cavity. The gain medium is a 16 m long of the fabricated (Ytterbium-doped fiber) YDF, which has a core composition of 0.8 wt % of Yb2O3, 1.8 wt % of Al2O3 and 23 wt % of GeO2, Ytterbium ion fluorescence lifetime of 1.1 ms and absorption of 9.0 dB/m at the pump wavelength of 976 nm. 20 m long photonic crystal fiber (PCF) is used to provide FWM effect so that the energy of different oscillating lines can be redistributed to improve multi-wavelength operation. The proposed laser generates 12 lines of optical comb with a line spacing of approximately 0.59 nm at 1035 nm region.

Effect of doped fiber length on the stretch pulses of a mode-locked erbium-doped fiber laser

A passively self-starting mode-locked fiber ring laser is demonstrated using a highly concentrated Erbium doped fiber (EDF) with a saturable absorber. The effect of EDF length on the performance of the laser is investigated. Stable stretched pulses are obtained at wavelength region of 1560nm with a repetition rate ranging from 10.1 to 12.1 MHz and a pulse width stretching from 0.52 to 0.75 ps as the EDF length is reduced from 4.5 to 1.5 m. The repetition rate goes higher as the cavity length decreases when a shorter EDF is used but the pulse width reduces as the EDF length increases since the total group velocity dispersion (GVD) in the cavity is close to zero. The article is published in the original.

An Enhanced Bismuth-Based Brillouin/Erbium Fiber Laser with Linear Cavity Configuration

Abstract A multi-wavelength Brillouin/erbium-doped fiber laser (BEFL) which operates in 1594 nm region is demonstrated using a 215 cm long Bismuth-based EDF and SMF. Two optical circulators were used at the output ends of the system to form a linear cavity to produce a cascaded Brillouin Stokes and anti-Stokes. A stable output laser comb of more than 20 lines was obtained with a spacing of approximately 0.089 nm at a Brillouin pump power of 4 dBm and two 1,480-nm pumps at powers of 100 mW. The number of lines is relatively higher compared with the ring cavity BEFL.