Nabel A. Negm

Biocidal and anti-corrosive activities of benzoimidazol-3-ium cationic Schiff base surfactants

Two series of cationic Schiff base surfactants, namely, 2‐(benzylideneamino)‐3‐(2‐oxo‐2‐alkoxyethyl)‐1,3‐benzoimidazol‐3‐ium bromide (IA–D) and 2‐[(4‐methoxybenzylidene) amino]‐3‐(2‐oxo‐2‐alkoxyethyl)‐1,3‐benzoimidazol‐3‐ium bromide (IIA–D) were prepared. The chemical structures of the prepared Schiff bases were recognized by elemental analysis, FTIR, H NMR, C13‐NMR and GC/MS spectra. The surface activities of the synthesized Schiff base cationic surfactants showed their tendency towards adsorption at the air/water interface. The adsorption tendency was estimated from the values of surface tension and the depression of surface tension at the critical micelle concentration. The studied surfactants were evaluated as antimicrobial agents against pathogenic and sulfur‐reducing bacteria using inhibition zone diameters and minimum inhibition concentration values. The synthesized cationic benzoimidazolium Schiff base cationic surfactants showed good antimicrobial activities against the tested microorganisms including Gram positive, Gram negative as well as fungi. The synthesized compounds were tested for the activity as corrosion inhibitors against carbon steel corrosion in 0.5 M HCl at 200 and 400 ppm. The promising inhibition efficiency of these compounds against the sulfur‐reducing bacteria facilitates them to be applicable in the petroleum field as new categories of Sulfur Reducing Bacteria biocides. The inhibition efficiencies of the tested compounds showed good inhibition and protection of the carbon steel. The corrosion inhibition tendency correlated to the surface activity and chemical structure of the compounds.

Structural and biological behaviors of some nonionic Schiff-base amphiphiles and their Cu(II) and Fe(III) metal complexes

Novel series of nonionic Schiff bases was synthesized and characterized using microelemental analysis, FTIR and (1)H NMR spectra. These Schiff bases and their complexes with Cu and Fe have been evaluated for their antibacterial activity against bacterial species such as Staphylococcus aureus, Pseudomonas aureus, Candida albi, Bacillus subtilis and Escherichia coli and their fungicidal activity against Aspcrgillus niger and Aspcrgillus flavus. The results of the biocidal activities showed high potent action of the synthesized Schiff bases towards both bacteria and fungi. Furthermore, complexation of these Schiff bases by Cu(II) and Fe(III) show the metal complexes to be more antibacterial and antifungal than the Schiff bases. The results were correlated to the surface activity and the transition metal type. The mode of action of these complexes was discussed.

Metal adsorption by agricultural biosorbents: Adsorption isotherm, kinetic and biosorbents chemical structures

Biosorption of Cu(II), Co(II) and Fe(III) ions from aqueous solutions by rice husk, palm leaf and water hyacinth was investigated as a function of initial pH, initial heavy metal ions concentration and treatment time. The adsorption process was examined by two adsorption isotherms: Langmuir and Freundlich isotherms. The experimental data of biosorption process were analyzed using pseudo-first order, pseudo-second order kinetic models. The equilibrium biosorption isotherms showed that the three studied biosorbents possess high affinity and sorption capacity for Cu(II), Co(II) and Fe(III) ions. Rice husk showed more efficiency than palm leaf and water hyacinth. Adsorption of Cu(II) and Co(II) was more efficient in alkaline medium (pH 9) than neutral medium due to the high solubility of metal ion complexes. The metal removal efficiency of each biosorbent was correlated to its chemical structure. DTA studies showed formation of metal complex between the biosorbents and the metal ions. The obtained results showed that the tested biosorbents are efficient and alternate low-cost biosorbent for removal of heavy metal ions from aqueous media.

Cationic schiff base amphiphiles and their metal complexes: Surface and biocidal activities against bacteria and fungi

A series of cationic surfactants containing schiff base groups was synthesized by condensation of four fatty amines namely: dodecyl, tetradecyl, hexadecyl and octadecyl amine and 4-diethyl aminobenzaldehyde (1-4), as well as their metal complexes with divalent transition metal ions including Co, Cu and Mn (5-16). The surface activities of the synthesized surfactants were influenced by their chemical structures and the type of the transition metals. The biological activity measurements of the parent cationic schiff bases showed high efficacy against Gram positive and Gram negative bacterial strains and fungi. While on complexation, the biocidal activity was increased remarkably. The biocidal activity of the tested compounds against sulfur reducing bacteria showed promising results in the field of biocide applications.

Benzothiazol-3-ium Cationic Schiff Base Surfactants: Synthesis, Surface Activity and Antimicrobial Applications against Pathogenic and Sulfur Reducing Bacteria in Oil Fields

Two series of cationic Schiff base surfactants namely: 2-(benzylideneamino)-3-(2-oxo-2-alkoxyethyl)-1,3-benzothiazol-3-ium bromide (1-4) and 2-[(4-methoxybenzylidene)amino]-3-(2-oxo-2-alkoxyethyl)-1,3-benzothiazol-3-ium bromide (5-8) were prepared. The chemical structures of the prepared Schiff bases were recognized by elemental analysis, FTIR, and NMR spectra. The surface activities of the synthesized Schiff base cationic surfactants were showed their tendency towards adsorption at the air/water interface. The adsorption tendency was estimated from the values of surface tension and the depression of surface tension at the CMC. The studied surfactants were evaluated as antimicrobial agents against pathogenic and sulfur reducing bacteria using inhibition zone technique. The synthesized cationic pyrazolium Schiff base surfactants showed good antimicrobial activities against the tested microorganisms including Gram positive, Gram negative and fungi. The promising inhibition efficiency of these compounds against the sulfur reducing bacteria facilitates them to be applicable in the petroleum field as new categories of SRB biocides.

Adsorption of aluminum and lead from wastewater by chitosan-tannic acid modified biopolymers: Isotherms, kinetics, thermodynamics and process mechanism

Chitosan was reacted by tannic acid to obtain three modified chitosan biopolymer. Their chemical structures were characterized by FTIR and elemental analysis. The prepared biopolymers were used to adsorb Al(III) and Pb(II) metal ions from industrial wastewater. The factors affecting the adsorption process were biosorbent amount, initial concentration of metal ion and pH of the medium. The adsorption efficiency increased considerably with the increase of the biosorbent amount and pH of the medium. The adsorption process of biosorbent on different metal ions was fitted by Freundlich adsorption model. The adsorption kinetics was followed Pseudo-second-order kinetic model. The adsorption process occurred according to diffusion mechanism which was confirmed by the interparticle diffusion model. The modified biopolymers were efficient biosorbents for removal of Pb(II) and Al(III) metal ions from the medium.

Synthesis and Characterization of Some Amino Acid Derived Schiff Bases Bearing Nonionic Species as Corrosion Inhibitors for Carbon Steel in 2N HCl

A novel series of nonionic amino acid Schiff-Bases were synthesized and characterized using different spectroscopic tools to elucidate their chemical structures. The surface and thermodynamic properties of these compounds were studied using classical measurements including surface and interfacial tension and emulsification tendency. The surface parameters of these compounds including surface tension, critical micelle concentration (CMC), effectiveness (πcmc), efficiency (Pc20), maximum surface excess (Γmax), and minimum surface area (Amin) showed their good surface activity. Their thermodynamic parameters of adsorption and micellization including free energy change of micellization and adsorption showed their tendency toward adsorption at the interfaces and also micelle formation at lower concentrations. The synthesized compounds were also evaluated as corrosion inhibitors for carbon steel at different doses (400, 200, 100, 50, and 25 ppm) in 2 N HCl using gravimetric technique (weight loss). The results showed that these inhibitors are characterized by very high corrosion inhibition efficiency ranged between 99.93% and 97.98% and low corrosion rates varied between 0.09 mpy and 0.17 mpy for higher doses (400 ppm). The efficiency of inhibition was decreased by increasing the exposure time. The most efficient corrosion inhibitor of the synthesized compounds was the inhibitor which contains polyethylene oxide chain length of 23 EO units and alkyl chain length of 12 methylene groups. The effect of the hydrophobic and hydrophilic chain length in the inhibitor molecules was discussed and rationalized with their inhibition efficiency. The tendency of these inhibitors toward complexation with the transition metals was also discussed in order to explain their higher efficiency.

Solubilization Behaviors of Nonpolar Substrates Using Double Tailed Cationic Surfactants

A series of double hydrophobic tails of N-methyl diethanolammonium bromide cationic surface active agents were synthesized. Their chemical structures were elucidated using different analytical tools including elemental analyses, FTIR, mass fragmentation, and 1H-NMR spectroscopy. Their surface parameters including critical micelle concentration (CMC), effectiveness (π CMC ), efficiency (Pc 20), maximum surface excess (Γ max ), and minimum surface area (A min ) were calculated. The behaviors of the synthesized molecules in their solutions were discussed based on the data of surface parameters, micellization and adsorption thermodynamics at 25°, 40°, and 55°C. The experimental data of surface activity showed that these molecules are tends to form micelles in the bulk of their solutions at lower temperatures. On contrarily, they prefer to adsorb at higher temperatures. The synthesized cationic surfactants were used as solubilizing agent for nonpolar substrate (paraffin oil) at 25°C. The results of solubilization measurements showed good ability for the used surfactants towards solubilizing paraffin oil in aqueous medium. The results showed that the chemical structure of the solubilizate plays an important rule in its solubilization. Several factors were found to influence the extent of solubilization including: number of alkyl chains within surfactant molecule, symmetry of molecules and chain length of hydrophobic parts. The results were rationalized by the Kraft point and HLB values of the used surfactants. Furthermore, solubilization curves showed the steady state solubilization of each surfactant used.

Some Corrosion Inhibitors Based on Schiff Base Surfactants for Mild Steel Equipments

Two series of Schiff base amphiphiles were prepared throughout condensation of benzaldehyde or anisaldehyde and three different fatty amines with various alkyl chain length; namely: dodecyl, hexadecyl and octadecyl amine. The chemical structures of the prepared Schiff bases were confirmed using elemental analysis, FTIR, and 1H-NMR spectra. The data of structural analysis for these compounds were confirmed the chemical structures and the purity of the synthesized amphiphiles. The synthesized Schiff base amphiphiles were evaluated as corrosion inhibitors for low carbon steel (mild steel) in various acidic media (HCl and H2SO4) using weight loss technique. The corrosion inhibition measurements of these inhibitors showed high protection of the low carbon steel alloys against corrosion process in the tested acidic media at different periods as well as they have good biocidel effectagainest SRB. The discussion was correlated the efficient corrosion inhibition of these inhibitors to their chemical structures.

Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibbs equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.