Nadia Santo

Cu/Cu-oxide nanoparticles as catalyst in the “click” azide–alkyne cycloaddition

Mixed Cu/Cu-oxide nanoparticles are an effective catalyst for the “click” 1,3-dipolar cycloaddition between azides and terminal alkynes, featuring short reaction times, soft reaction conditions and full regioselectivity.

Nano-sized CuO, TiO2 and ZnO affect Xenopus laevis development

Abstract The teratogenic potential of commercially available copper oxide (CuO), titanium dioxide (TiO2) and zinc oxide (ZnO) nanoparticles (NPs) was evaluated using the standardized FETAX test. After characterization of NP suspensions by TEM, DLS and AAS, histopathological screening and advanced confocal and energy-filtered electron microscopy techniques were used to characterize the induced lesions and to track NPs in tissues. Except for nCuO, which was found to be weakly embryolethal only at the highest concentration tested, the NPs did not cause mortality at concentrations up to 500 mg/L. However, they induced significant malformation rates, and the gut was observed to be the main target organ. CuO NPs exhibited the highest teratogenic potential, although no specific terata were observed. ZnO NPs caused the most severe lesions to the intestinal barrier, allowing NPs to reach the underlying tissues. TiO2 NPs showed mild embryotoxicity, and it is possible that this substance could be associated with hidden biological effects. Ions from dissolved nCuO contributed greatly to the observed embryotoxic effects, but those from nZnO did not, suggesting that their mechanisms of action may be different.

The controlled pulsed laser deposition of Ag nanoparticle arrays for surface enhanced Raman scattering

An effective method for the production of surface enhanced Raman scattering (SERS) active substrates is presented. Nanostructured silver thin films are pulsed laser deposited in an argon atmosphere. The films consist of arrays of nanoparticles whose size is controlled by the Ar pressure. The surface morphology of the films can be tuned by the laser pulse number. Nanoparticle size is calculated by a phenomenological model taking into account the dynamics of the laser generated silver plasma. The SERS activity of the films is investigated by Raman scattering of adsorbed rhodamine 6G at different concentrations.

Self-assembled pullulan-silica oxygen barrier hybrid coatings for food packaging applications.

The scope of this study encompassed the evaluation of pullulan as a suitable biopolymer for the development of oxygen barrier coatings to be applied on poly(ethylene terephthalate) (PET), especially for food packaging applications. To enhance the oxygen barrier properties of the organic phase (pullulan) even at high relative humidity values, an inorganic phase (silica), obtained through in situ polymerization, was also utilized to obtain hybrid coatings via the sol-gel technique. Transmission electron microscopy (TEM) images and Fourier transform infrared (FT-IR) spectra showed that mixing the two phases yielded a three-dimensional hybrid network formed by self-assembly and mediated by the occurrence of new hydrogen-bond interactions at the intermolecular level, although the formation of new covalent bonds could not be excluded. The deposition of the hybrid coatings decreased the oxygen transmission rate (OTR) of the plastic substrate by up to 2 orders of magnitude under dry conditions. The best performance throughout the scanned humidity range (0%-80% relative humidity) was obtained for the formulation with the lowest amount of silica (that is, an organic/inorganic ratio equal to 3).

Rubber–silica nanocomposites obtained by in situ sol–gel method: particle shape influence on the filler–filler and filler–rubber interactions

Silica–natural rubber composites were prepared by in situ sol–gel synthesis of silica nanoparticles functionalized with alkylthiol or alkylpolysulfide. The functionalizing groups were linked to silica particles by hydrolysis and polycondensation of a mixture of tetraethoxysilane (TEOS) with a suitable amount of (3-mercaptopropyl) trimethoxysilane (TMSPM), bis (3-triethoxysilylpropyl) disulfide (TESPD) or bis (3-triethoxysilylpropyl) tetrasulfide (TESPT). Particles from TEOS are spherical, instead those from TESPD, TESPT and TMSPM have irregular anisotropic shapes. This is due to the presence of isotropic or anisotropic interactions among the particle base units. Silica particles synthesized in the presence of TMSPM can also undergo condensation of the alkylthiol chains with the silanol groups, thus giving rise to a strong preferential direction for the anisotropic shape. Predominant filler–filler interactions and easy self-assembly were detected in particles from TEOS while those from TESPD and TESPT showed high filler–rubber interactions. Both filler–rubber and strong filler–filler interactions are present in silica particles synthesized by TMSPM. The dynamic mechanical properties of the composites, tested with stress-strain measurements, show that the storage modulus increases by increasing the filler–filler interaction, and it is maximum when also the filler–rubber interaction occurs. Strong silica–rubber interaction favors the silica dispersion in rubber, while it makes the filler network less compact and lowers the storage modulus.

Ag nanocluster synthesis by laser ablation in Ar atmosphere: A plume dynamics analysis

Ag thin films were deposited by pulsed laser ablation in a controlled Aratmosphere. The deposition process was performed at different Ar pressure values in the range between 10 and 100 Pa to investigate the influence of ambient gas pressure on the plasma expansion dynamics and on the film structural properties. Position, velocity and volume of the laser generated plasma as functions of time were obtained by time resolved fast photography. The morphological properties of the films were investigated by transmission electron microscopy which shows that film growth proceeds via aggregation on the substrates of nanoclusters formed in the expanding plume. The formation of nanoparticles takes place as a consequence of plasma confinement induced by the interaction with ambient gas species. Data from fast photography analysis were used as input parameters to calculate the size of the nanoparticles using a model that takes into account the collisional nature of the laser generated silver plasma.

Ultrasound-Assisted Pullulan/Montmorillonite Bionanocomposite Coating with High Oxygen Barrier Properties

In this paper, the preparation and characterization of oxygen barrier pullulan sodium montmorillonite (Na(+)-MMT) nanocomposite coatings are presented for the first time. Full exfoliation of platelets during preparation of the coating water dispersions was mediated by ultrasonic treatment, which turned out to be a pivotal factor in the oxygen barrier performance of the final material even at high relative humidity (RH) conditions [oxygen permeability coefficients ~1.43 ± 0.39 and 258.05 ± 13.78 mL·μm·m(-2)·(24 h)(-1)·atm(-1) at 23 °C and 0% RH and 70% RH, respectively]. At the micro- and nanoscale, the reasons are discussed. The final morphology of the coatings revealed that clay lamellae were stacked on top of one another, probably due to the forced confinement of the platelets within the coating thickness after solvent evaporation. This was also confirmed by modeling the experimental oxygen permeability data with the well-known Nielsen and Cussler permeation theoretical models, which suggested a reasonable aspect ratio (α) of ~100. Electron microscopic analyses also disclosed a peculiar cell-like arrangement of the platelets. The stacking of the clay lamellae and the cell-like arrangement create the excellent oxygen barrier properties. Finally, we demonstrated that the slight haze increase in the bionanocomposite coating materials arising from the addition of the clays depends on the clay concentration but not so much on the sonication time, due to the balance of opposite effects after sonication (an increase in the number of scattering centers but a reduction in their size).

External Morphology and Muscle Arrangement of Brachionus urceolaris, Floscularia ringens, Hexarthra mira and Notommata glyphura (Rotifera, Monogononta)

We studied four monogonont rotifers (Brachionus urceolaris, Floscularia ringens, Hexarthra mira, Notommata glyphura) using two different techniques of microscopy: (1) the presence of filamentous actin was examined using phalloidin-fluorescent labelled specimens and a confocal laser scanning microscope (CLSM); (2) external morphology was investigated using a scanning electron microscope (SEM). B. urceolaris, F. ringens, and N. glyphura showed similar patterns of muscle distribution: a set of longitudinal muscles acting as head and foot retractors, and a set of circular muscles. However, the size and distribution of circular muscles differed among these species. H. mira differed from the other species in that it lacked circular muscles but possessed strong muscles that extended into each arm. The study showed that using both CLSM and SEM provides better resolution of the anatomy and external morphology of rotifers than using one of these techniques alone. This can facilitate better understanding of the complicated anatomy of these animals.

Importance of subaerial biofilms and airborne microflora in the deterioration of stonework: a molecular study

The study characterized the sessile microbial communities on mortar and stone in Milan Universitys Richinis Courtyard and investigated the relationship between airborne and surface-associated microbial communities. Active colonization was found in three locations: green and black patinas were present on mortar and black spots on stone. Confocal laser scanning microscopy, scanning electron microscopy and culture-independent molecular methods revealed that the biofilm causing deterioration was dominated by green algae and black fungi. The mortar used for restoration contained acrylic and siloxane resins that could be used by microorganisms as carbon and energy sources thereby causing proliferation of the biofilm. Epifluorescence microscopy and culture-based methods highlighted a variety of airborne microflora. Bacterial and fungal counts were quantitatively similar to those reported in other investigations of urban areas, the exception being fungi during summer (1–2 orders of magnitude higher). For the first time in the cultural heritage field, culture-independent molecular methods were used to resolve the structure of airborne communities near discoloured surfaces, and to investigate the relationship between such communities and surface-associated biofilms.

Epigenetic inheritance systems in bdelloid rotifers. I. Maternal‐age‐related biochemical effects

Abstract The present study focuses on the changes of protein patterns that occur with age and on their maintenance across orthoclonal generations (i.e., lines that belong to the same clone and that differ with the age of their ancestors). About 500 individuals of the bdelloid rotifer Macrotrachela quadricornifera were cultivated and processed, and their protein phenotypes compared by a similarity test. The number of protein bands decreased with the age of the individuals. Young rotifers had the young protein pheno‐type when born from young mothers, and the old protein pattern when born from aged ones. The age of their grandmother was irrelevant. On the basis of these results, bdelloid rotifers seemed to transmit to the offspring their biochemical phenotype modified by age and the modified phenotype could persist over the two generations considered. Thus, a truly evolutionarily ancient partheno‐genetic taxon, such as Bdelloidea, apparently produces variable offspring by transmitting phenotypic variations i...