Nadim Darwish

Electrostatic catalysis of a Diels–Alder reaction

It is often thought that the ability to control reaction rates with an applied electrical potential gradient is unique to redox systems. However, recent theoretical studies suggest that oriented electric fields could affect the outcomes of a range of chemical reactions, regardless of whether a redox system is involved. This possibility arises because many formally covalent species can be stabilized via minor charge-separated resonance contributors. When an applied electric field is aligned in such a way as to electrostatically stabilize one of these minor forms, the degree of resonance increases, resulting in the overall stabilization of the molecule or transition state. This means that it should be possible to manipulate the kinetics and thermodynamics of non-redox processes using an external electric field, as long as the orientation of the approaching reactants with respect to the field stimulus can be controlled. Here, we provide experimental evidence that the formation of carbon–carbon bonds is accelerated by an electric field. We have designed a surface model system to probe the Diels–Alder reaction, and coupled it with a scanning tunnelling microscopy break-junction approach. This technique, performed at the single-molecule level, is perfectly suited to deliver an electric-field stimulus across approaching reactants. We find a fivefold increase in the frequency of formation of single-molecule junctions, resulting from the reaction that occurs when the electric field is present and aligned so as to favour electron flow from the dienophile to the diene. Our results are qualitatively consistent with those predicted by quantum-chemical calculations in a theoretical model of this system, and herald a new approach to chemical catalysis.

Distance-dependent electron transfer at passivated electrodes decorated by gold nanoparticles

The phenomenon of nanoparticles attached to an electrode passivated by an organic layer allowing efficient electron transfer between redox species in solution and the underlying electrode to be restored has resulted in Chazalviel and Allongue proposing a theory [Chazalviel, J.-N.; Allongue, P. J. Am. Chem. Soc.2011, 133, 762-764] to explain this phenomenon. The theory suggests that with electrode-organic layer-nanoparticle constructs, high exchange current densities, compared with when the nanoparticles are absent, results in the rate of electron transfer being independent of the thickness of the organic layer until a threshold thickness is exceeded. Thereafter, the thicker the organic layer, the slower the rate of electron transfer. Herein we provide the first experimental data to support this theory using a single experimental system that can show the transition from thickness independent electron transfer kinetics to distant dependent kinetics. This was achieved using ethylenediamine electrodeposited on a glassy carbon electrode. Different numbers of deposition cycles were applied in order to fabricate different thicknesses of the organic film. The deposited films showed progressively greater blocking abilities toward ruthenium hexamine, as a redox active probe in solution, as the films got thicker. Electron transfer kinetics of nanoparticle-decorated surfaces showed a change from thickness independent to thickness dependent as the organic layer exceeded an average thickness of 20 Å. Electrochemical impedance spectroscopy, cyclic voltammetry, scanning electron microscopy, ellipsometry, and atomic force microscopy were used to characterize the fabricated surfaces.

Importance of the indium tin oxide substrate on the quality of self-assembled monolayers formed from organophosphonic acids.

The role of indium tin oxide (ITO) surface structure and chemistry on the formation of self-assembled monolayers (SAM) derived from organophosphonic acids has been investigated. The surface hydroxide content, crystal structure, and roughness of unmodified ITO surfaces were analyzed with X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM), and contact angle measurements. Organophosphonic acid monolayer modified ITO surfaces were then characterized using electrochemistry, contact angle measurements and impedance spectroscopy. To ascertain the extent of defects, Pb was underpotentially deposited (UPD) onto the monolayer modified ITO surfaces at defect sites and regions where the monolayer was weakly bound. The extent of defects, and the location of defects, in monolayers formed on different ITO surfaces were determined from the amount of charge passed during UPD of Pb at identical conditions, followed by XPS analysis of the Pb 4f peak and imaging with scanning tunnelling microscopy (STM). The results demonstrate that the crystal structure and hydroxide ion concentration of ITO surfaces significantly influence the quality of self-assembled monolayer formation as does the surface roughness. The most well-packed stable monolayers formed only on smooth amorphous ITO substrates with homogeneous grains and high hydroxide content. Lower quality SAMs with significant defects formed on polycrystalline surfaces and the higher the roughness the more the defects. STM defect mapping revealed that the location of defects in monolayers occurred at the boundaries between grain edges on the polycrystalline surfaces. This shows that the substrate characteristics have a strong influence on the quality of monolayers formed on ITO surfaces.

The rise of self-assembled monolayers for fabricating electrochemical biosensors--an interfacial perspective.

Electrochemical biosensors have witnessed a tremendous growth in nanotechnology and in depth characterisation over the last two decades. In particular, modification of surfaces with self-assembled monolayers (SAMs) has provided a molecular control of the interfaces, which has paved the way to fabricate improved biosensing devices. Here we focus on the important advances of using SAMs in enzyme electrodes and affinity biosensors such as for peptides, DNA and antibodies.

Multi-Responsive Photo- and Chemo-Electrical Single-Molecule Switches

Incorporating molecular switches as the active components in nanoscale electrical devices represents a current challenge in molecular electronics. It demands key requirements that need to be simultaneously addressed including fast responses to external stimuli and stable attachment of the molecules to the electrodes while mimicking the operation of conventional electronic components. Here, we report a single-molecule switching device that responds electrically to optical and chemical stimuli. A light pointer or a chemical signal can rapidly and reversibly induce the isomerization of bifunctional spiropyran derivatives in the bulk reservoir and, consequently, switch the electrical conductivity of the single-molecule device between a low and a high level. The spiropyran derivatives employed are chemically functionalized such that they can respond in fast but practical time scales. The unique multistimuli response and the synthetic versatility to control the switching schemes of this single-molecule device suggest spiropyran derivatives as key candidates for molecular circuitry.

Studies on the Effect of Solvents on Self-Assembled Monolayers Formed from Organophosphonic Acids on Indium Tin Oxide

The preparation of self-assembled monolayers (SAMs) of organophosphonic acids on indium tin oxide (ITO) surfaces from different solvents (triethylamine, ethyl ether, tetrahydofuran (THF), pyridine, acetone, methanol, acetonitrile, dimethyl sulfoxide (DMSO), or water) has been performed with some significant differences observed. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and contact angle measurement demonstrated that the quality of SAMs depends critically on the choice of solvents. Higher density, more stable monolayers were formed from solvents with low dielectric constants and weak interactions with the ITO. It was concluded low dielectric solvents that were inert to the ITO gave monolayers that were more stable with a higher density of surface bound molecules because higher dielectric constant solvents and solvents that coordinate with the surface disrupted SAM formation.

Surface-bound molecular rulers for probing the electrical double layer

Herein, we report the first experimental investigation on the effect of varying the position of redox-active moieties, within the electrical double layer, on the apparent formal potential and on the electron transfer rate constant. This was achieved using a rigid class of molecules, norbornylogous bridges, to place redox species (ferrocene) at a fixed position above the surface of the electrode. Cyclic voltammetry and alternating current voltammetry were used to calculate the apparent formal potential and the electron transfer rate constant for the electron transfer between the ferrocene and the gold electrode. We use the effect of electric field on the apparent formal potential measurement of the surface-bound redox species to calculate the potential drop from the initiation of the electrical double layer to different distances above it. It was found that self-assembled monolayers formed from ω-hydroxyalkanethiol have a potential profile very similar to that described by classical theories for bare metal electrodes. A steep drop in potential in the Stern layer was observed followed by a smaller potential drop in the Gouy-Chapman layer. The electron transfer rate constant was found to decrease as the distance between the ferrocene moiety and the initiation of the double layer is increased. Thus, the electron transfer rate constant appears to be dependent on ion concentration.

Highly Conductive Single-Molecule Wires with Controlled Orientation by Coordination of Metalloporphyrins

Porphyrin-based molecular wires are promising candidates for nanoelectronic and photovoltaic devices due to the porphyrin chemical stability and unique optoelectronic properties. An important aim toward exploiting single porphyrin molecules in nanoscale devices is to possess the ability to control the electrical pathways across them. Herein, we demonstrate a method to build single-molecule wires with metalloporphyrins via their central metal ion by chemically modifying both an STM tip and surface electrodes with pyridin-4-yl-methanethiol, a molecule that has strong affinity for coordination with the metal ion of the porphyrin. The new flat configuration resulted in single-molecule junctions of exceedingly high lifetime and of conductance 3 orders of magnitude larger than that obtained previously for similar porphyrin molecules but wired from either end of the porphyrin ring. This work presents a new concept of building highly efficient single-molecule electrical contacts by exploiting metal coordination chemistry.

Electroconductive Hydrogel Based on Functional Poly(Ethylenedioxy Thiophene)

Poly(ethylene dioxythiophene) with functional pendant groups bearing double bonds is synthesized and employed for the fabrication of electroactive hydrogels with advantageous characteristics: covalently cross-linked porous 3D scaffolds with notable swelling ratio, appropriate mechanical properties, electroactivity in physiological conditions, and suitability for proliferation and differentiation of C2C12 cells. This is a new approach for the fabrication of conductive engineered constructs.

Surface-bound norbornylogous bridges as molecular rulers for investigating interfacial electrochemistry and as single molecule switches.

Electron transfer (ET) reactions through molecules attached to surfaces, whether they are through single molecules or ensembles, are the subject of much research in molecular electronics, bioelectronics, and electrochemistry. Therefore, understanding the factors that govern ET is of high importance. The availability of rigid hydrocarbon molecular scaffolds possessing well-defined configurations and lengths that can be systematically varied is crucial to the development of such devices. In this Account, we demonstrate how suitably functionalized norbornylogous (NB) systems can provide important insights into interfacial ET processes and electrical conduction through single molecules. To this end, we created NB bridges with vic-trans-bismethylenethiol groups at one end so they can assemble on gold electrodes and redox species at the distal ends. With these in hand, we then formed mixed self-assembled monolayers (SAMs) containing a small proportion of the NB bridges diluted with alkanethiols. As such, the NB bridges served as molecular rulers for probing the environment above the surface defined by the diluent species. Using this construct, we were able to measure the interfacial potential distribution above the diluent surface, and track how variation in the ionic distribution in the electrical double layer impacts ET kinetics. Using the same construct, but with a redox molecule that remains neutral in both oxidized and reduced states, we could explore the impact of the chemical environment near a surface on ET processes. These results are important, because with conventional surface constructs, ET occurs across this interfacial region. Such knowledge is therefore relevant to the design of molecular systems at surfaces involving ET. With a second family of molecules, we investigated aspects of single-molecule electrical conduction using NB bridges bearing vic-trans-bismethylenethiol groups at both ends of the bridge. This gave us insights into distance-dependent electron transport through single molecules and introduced a method of boosting the conductance of saturated molecules by incorporating aromatic moieties in their backbone. These partially conjugated NB molecules represent a new class of molecular wires with far greater stability than conventional completely conjugated molecular wires. Of particular note was our demonstration of a single molecule switch, using a NB bridge containing an embedded anthraquinone redox group, the switching mechanism being via electrochemically controlled quantum interference.