Najam A. Shakil

The root endophyte fungus Piriformospora indica leads to early flowering, higher biomass and altered secondary metabolites of the medicinal plant, Coleus forskohlii

This study was undertaken to investigate the influence of plant probiotic fungus Piriformospora indica on the medicinal plant C. forskohlii. Interaction of the C. forskohlii with the root endophyte P. indica under field conditions, results in an overall increase in aerial biomass, chlorophyll contents and phosphorus acquisition. The fungus also promoted inflorescence development, consequently the amount of p-cymene in the inflorescence increased. Growth of the root thickness was reduced in P. indica treated plants as they became fibrous, but developed more lateral roots. Because of the smaller root biomass, the content of forskolin was decreased. The symbiotic interaction of C. forskohlii with P. indica under field conditions promoted biomass production of the aerial parts of the plant including flower development. The plant aerial parts are important source of metabolites for medicinal application. Therefore we suggest that the use of the root endophyte fungus P. indica in sustainable agriculture will enhance the medicinally important chemical production.

Synthesis, Characterization and In Vitro Anti-invasive Activity Screening of Polyphenolic and Heterocyclic Compounds

Invasion is the hallmark of malignant tumors, and is responsible for the bad prognosis of the untreated cancer patients. The search for anti-invasive treatments led us to screen compounds of different classes for their effect in an assay for invasion. Thirty-nine new compounds synthesized in the present study along with 56 already reported compounds belonging mainly to the classes of lactones, pyrazoles, isoxazoles, coumarins, desoxybenzoins, aromatic ketones, chalcones, chromans, isoflavanones have been tested against organotypic confronting cultures of invasive human MCF-7/6 mammary carcinoma cells with embryonic chick heart fragments in vitro. Three of them (a pyrazole derivative, an isoxazolylcoumarin and a prenylated desoxybenzoin) inhibited invasion at concentrations as low as 1 microM; instead of occupying and replacing the heart tissue within 8 days, the MCF-7/6 cells grew around the heart fragments and left it intact, when treated with these compounds. At the anti-invasive concentration of 1 microM, the three compounds did not affect the growth of the MCF-7/6 cells, as shown in the sulforhodamine B assay. Aggregate formation on agar was not stimulated by any of the three anti-invasive compounds, making an effect on the E-cadherin/catenin complex improbable. This is an invasion suppressor that can be activated in MCF-7/6 cells by a number of other molecules. Our data indicate that some polyphenolic and heterocyclic compounds are anti-invasive without being cytotoxic for the cancer cells.

Development of controlled release formulations of imidacloprid employing novel nano-ranged amphiphilic polymers

Amphiphilic copolymers, synthesized from poly (ethylene glycols) and various aliphatic diacids, which self assemble into nano-micellar aggregates in aqueous media, were used to develop controlled release (CR) formulations of imidacloprid [1-(6 chloro-3-pyridinyl methyl)-N- nitro imidazolidin-2- ylideneamine] using encapsulation technique. High solubilisation power and low critical micelle concentration (CMC) of these amphiphilic polymers may increase the efficacy of formulations. Formulations were characterised by Infrared (IR) spectroscopy, Dynamic Light Scattering (DLS) and Transmission Electron Microscope (TEM). Encapsulation efficiency, loading capacity and stability after accelerated storage test of the developed formulations were checked. The kinetics of imidacloprid release in water from the different formulations was studied. Release from the commercial formulation was faster than the CR formulations. The diffusion exponent (n value) of imidacloprid, in water ranged from 0.22 to 0.37 in the tested formulations. While the time taken for release of 50 % of imidacloprid ranged from 2.32 to 9.31 days for the CR formulations. The developed CR formulations can be used for efficient pest management in different crops.

CHEMO-ENZYMATIC SYNTHESIS AND CHARACTERIZATION OF NOVEL FUNCTIONALIZED AMPHIPHILIC POLYMERS

ABSTRACT The condensation copolymerization of Dimethyl 5-hydroxyisophthalate (1) with Polyethylene glycols (PEGs) (2a–2d) of varying molecular weights, catalyzed by Novozyme-435 (immobilized Candida antarctica lipase B) in bulk is reported. The structures of the resulting polymers, Poly[(poly(oxyethylene)-oxy-5-hydroxyisophthaloyl] (3a–3c) were characterized by 1H (1D and 2D) and 13C-NMR spectroscopic experiments. Further, these polymers have been derivatized by attaching decanyl and 12-hydroxydodecanyl chains to the phenolic hydroxyl group. The resulting amphiphilic polymeric systems were characterized by detailed spectroscopic analysis. Light Scattering Photometry as well as Gel Per meation Chromatography were used to evaluate the particle size and molecular weights of the polymers. In principle, the method developed is flexible so that it can be used to generate a wide array of functionalized amphiphilic polymers. In the absence of biocatalytic transformation, such structural control would be extremely difficult or currently impossible to obtain.

Development of Poly(ethylene glycol) Based Amphiphilic Copolymers for Controlled Release Delivery of Carbofuran

The formation of micelles in a solvent that is selective for one of the blocks is one of the most important and useful properties of block copolymers. We had synthesized copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media. In the present work, we have utilized these nano micelles for the encapsulation of carbofuran, [2,3–dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate], a systemic insecticide-nematicide, for the development of controlled release formulation.

Cadinene sesquiterpenes from Eupatorium adenophorum and their antifungal activity

Bioactive constituents of Eupatorium adenophorum were investigated for antifungal activity. A structure-antifungal activity relationship of cadinene sesquiterpenes was predicted by evaluating individual derivatives. Cadinene derivatives were extracted from leaves of Eupatorium adenophorum using ethyl acetate. Five cadinene sesquiterpenes were isolated by column chromatography and Preparative Thin Layer Chromatography. Bioactivity of these cadinene sesquiterpenes were evaluated in vitro against four phytopathogenic fungi using poison food technique. Purified sesquiterpenes were spectroscopically elucidated as cadinan-3-ene-2,7-dione (1), 7-hydroxycadinan-3-ene-2-one (2), 5,6-dihydroxycadinan-3-ene-2,7-dione (3), cadinan-3,6-diene-2,7-dione (4) and 2-acetyl-cadinan-3,6-diene-7-one (5). Antifungal evaluation of these compounds against pathogenic fungi was found to be selective. Compound 1 was highly inhibitory towards S. rolfsii (ED50 181.60 ± 0.58 μgmL−1) and R. solani (ED50 189.74 ± 1.03 μgmL−1). Availability of plant material and significant antifungal activity makes the plant a potential source of antifungal agent and that can be exploited for the development of a natural fungicide.

Synthesis of novel poly(ethylene glycol) based amphiphilic polymers

Abstract The synthesis of new amphiphilic polyesters based on poly(ethylene glycol) (PEGs) and studies on their solution properties are reported. Two novel monomers, dimethyl 5-n-butoxy isophthalate (2) and dimethyl 5-n-octoxy isophthalate (3) were synthesized. Three series of novel amphiphilic polyesters, i.e. poly(ethyleneoxy isophthalate)s (10–15), poly(ethyleneoxy n-butoxy isophthalate)s (16–21) and poly(ethyleneoxy n-octoxy isophthalate)s (22–27) have been synthesized from PEGs of different sizes and dimethyl isophthalates 1–3 via the transesterification–polycondensation using dibutyltin diacetate as a catalyst. The structures of the polyesters were established from a detailed analysis of their spectra, i.e. FTIR, 1H-NMR (one- and two-dimensional) and 13C-NMR. By adjusting the ratio of hydrophobic (diesters) and hydrophilic (PEGs) segments in polymers, their main chain structures and solution properties could be changed. The viscosity molecular weights (Mv) of polymers, obtained from Mark–Houwink–Sakurada relationship having poly(ethylene terephthalate) as a model, were in the range of 4500–32,000 g/mol. Intrinsic viscosities were studied based on polymer backbone length (PEGs effect) and pendant group (diesters effect) and these were found to be dependent on molecular weights of the PEGs used.

Bio-efficacy evaluation of nanoformulations of β-cyfluthrin against Callosobruchus maculatus (Coleoptera: Bruchidae)

In the present investigation, bioefficacy of developed β-cyfluthrin formulations, utilizing laboratory synthesized poly(ethylene glycols) based amphiphilic copolymers, were evaluated against Callosobruchus maculatus (Coleoptera: Bruchidae). The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG – 1500 (3c) and PEG – 2000 (3d) as the hydrophilic segment showed greater efficacy after 14 days as evident from EC50 values (2.2 and 1.58 mg L−1 respectively). Also, release from the commercial SC formulation was faster than developed formulations as the commercial formulation had the lowest EC50 value on the first day (0.51 mg L−1). The mean EC50 of the commercial formulation against C. maculatus was quite high as compared to those of developed formulations. The results suggest that depending upon the polymer matrix used, the application rate of β-cyfluthrin can be optimized to achieve insect control at the desired level and period. The results described in this paper are promising and provide a comparison of developed formulations with the commercial one showing an earlier degradation of β-cyfluthrin in the latter and relatively prolonged activity in the former.

Release kinetics of β-cyfluthrin from its encapsulated formulations in water.

Controlled release formulations of β-cyfluthrin, a non-systemic, broad spectrum contact insecticide, have been prepared using laboratory synthesized poly(ethylene glycol) (PEG) based amphiphilic copolymers. Copolymers of polyethylene glycols of different molecular weights and various dimethyl esters, viz. dimethyl isophthalate, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of β-cyfluthrin from developed controlled release (CR) formulations were studied in comparison with that of the commercially available 025 SC. Release from the commercial formulation was faster than with the developed CR formulations. The rate of release of encapsulated β-cyfluthrin from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of β-cyfluthrin in water ranged from 0.427 to 0.622 in the tested formulations. The release was diffusion controlled with a half-release time (t1/2) of 3.92 to 7.9 days in water from different formulations, and the period of optimum availability (POA) of β-cyfluthrin ranged from 1.4 to 20.5 days. The results suggest that the application rate of β-cyfluthrin can be optimized to achieve insect control at the desired level and period.

Release kinetics of controlled release formulations of thiamethoxam employing nano-ranged amphiphilic PEG and diacid based block polymers in soil

Amphiphilic copolymers, synthesized from poly(ethylene glycols) and various aliphatic and aromatic diacids, which self-assemble into nanomicellar aggregates in aqueous media, were used to develop controlled release (CR) formulations of thiamethoxam (3-(2-chloro-1,3-thiazol-5-ylmethyl)-5-methyl-1,3,5-oxadiazinan-4-ylidene(nitro)amine) using encapsulation technique Formulations were characterised by Infrared (IR) spectroscopy, Dynamic Light Scattering (DLS) and Transmission Electron Microscope (TEM). Encapsulation efficiency, loading capacity and stability after accelerated storage test of the developed formulations were checked. The kinetics of thiamethoxam, released in sandy loam soil from the different formulations was studied. Release from the commercial formulation was faster than the CR formulations. The time taken for release of 50 % of thiamethoxam ranged from 3.56 to 6.07 days for the CR formulations. Although the diffusion exponent (n value) of thiamethoxam in soil ranged from 0.532 to 0.881 in the tested formulations showing non-Fickian transport. These CR formulations may be used in safer, effective and economic crop protection.