Namal S. Nawana

Failure strengths of different meniscal suturing techniques

The aim of this study was to measure the failure strengths of three arthroscopic meniscal suturing methods. The techniques investigated were a single horizontal loop, a double vertical loop, and a single vertical loop. Eleven human, lateral menisci obtained at autopsy were cut with a scalpel to simulate peripheral longitudinal tears. The menisci were then repaired with one suture at a time, using each of the three methods in turn. The two parts of the meniscus were then pulled apart using a computer-controlled materials testing machine until failure occurred, either by the suture itself failing or by the suture pulling out because of tearing of the meniscus. The horizontal sutures had a mean failure strength of 29.3 N, whereas the double vertical loop failed at 63.2 N and the single vertical loop at 67.3 N. The horizontal loop sutures and the double vertical loop sutures all failed by pulling out of the meniscus. The single vertical loop sutures failed by rupture of the suture itself. This study showed the superior mechanical characteristics of the single vertical loop suturing system over the other techniques tested. Owing to the more consistent failure strength, decreased costs, and shorter surgical time over the double vertical loop system, the single vertical loop technique is recommended for arthroscopic meniscal repair.

Radiographic and histologic analysis of cemented double tapered femoral stems

The macroscopic, radiographic, and histologic features of the prosthesis-cement and cement-bone interfaces and adjacent bone were studied in 21 cemented hemiarthroplasties in sheep that had lived until sacrifice at 9 months. The features were compared with those immediately after implantation of the stem in the contralateral femur. The femoral stem was a double taper that was either polished collarless, matte collarless, or matte collared. There was no prosthesis to cement debonding or cement to bone radiolucent line immediately after implantation, and there was excellent interdigitation at the cement-bone interface. After 9 months there was no evidence of prosthesis to cement debonding and no stem with definite loosening. At 9 months after implantation there was evidence of bone remodeling with new bone filling what were presumed to be gaps at the cement-bone interface from immediately after implantation. Radiolucent lines at the cement-bone interface were found to represent trabeculation of the cortical bone rather than the presence of a complete fibrous interface, which was not seen. There was no difference between stem types. Sheep have been shown to be useful in a model of cemented hip arthroplasty and, although no differences were seen between stem types at 9 months after implantation, long term differences cannot be excluded.

The skeletal response to matt and polished cemented femoral stems

We studied the effect of the surface finish of the stem on the transfer of load in the proximal femur in a sheep model of cemented hip arthroplasty. Strain-gauge analysis and corresponding finite-element (FE) analysis were performed to assess the effect of friction and creep at the cement-stem interface. No difference was seen between the matt and polished stems. FE analysis showed that the effects of cement creep and friction at the stem-cement interface on femoral strain were small compared with the effect of inserting a cemented stem.