Nana M. Agyei

The removal of phosphate ions from aqueous solution by fly ash, slag, ordinary Portland cement and related blends

Phosphate ions have been removed from aqueous solution by fly ash, slag, ordinary Portland cement (OPC) and related cement blends. The rate and efficiency of PO43− removal were found to increase in the order: fly ash, slag, OPC, apparently mimicking the order of increasing percent CaO in the adsorbents. Blending OPC with fly ash or slag evidently results in diminished PO43− removal efficiency. Better removal was obtained at higher solute concentration, acidic pH and higher temperature. The effect of particle size and the speed of mixing were found not to be significant. A first-order kinetic model was used to obtain values for overall sorption rate constants and intraparticle diffusion constants. The Frumkin isotherm was found to be the appropriate equation for modelling isotherms from the experimental adsorption data, and values have been obtained for the isotherm constants. A 400-mg/l PO43− (as P) solution was fed at a steady velocity of 2.0 cm/min through a 2.0-cm fixed-bed column (at pH 9.0 and 25 °C), and breakthrough curves were constructed to obtain estimated adsorption capacity values of 32, 60, 75, 78 and 83 mg PO43−/g adsorbent for fly ash, slag, OPC+fly ash, OPC+slag and OPC, respectively.

A novel adsorbent for heavy metal remediation in aqueous environments

The objective of this study was to investigate the possibility of using maize tassel as an alternative adsorbent for the removal of chromium (VI) and cadmium (II) ions from aqueous solutions. The effect of pH, solution temperature, contact time, initial metal ion concentration and adsorbent dose on the adsorption of chromium (VI) and cadmium (II) by tassel was investigated using batch methods. Adsorption for both chromium (VI) and cadmium (II) was found to be highly pH dependent compared to the other parameters investigated. Obtained results gave an adsorption capacity of 79.1 % for chromium (VI) at pH 2, exposure time of 1h at 25 °C. Maximum capacity of cadmium of 88 % was obtained in the pH range of 5-6 at 25 °C after exposure time of 1 h. The adsorption capacities of tassel for both chromium (VI) and cadmium (II) were found to be comparable to those of other commercial adsorbents currently in use for the removal of heavy metals from aqueous wastes. These results have demonstrated the immense potential of maize tassel as an alternative adsorbent for toxic metal ions remediation in polluted water and wastewater.

An investigation of phosphate ion adsorption from aqueous solution by fly ash and slag

Abstract The removal of phosphate ions from aqueous solution by fly ash and slag has been investigated. The chemical composition of each adsorbent has been determined by XRF and XRD, as well as some important physical characteristics such as BET surface area and mean particle size. The effect of contact time on the rate of PO43− removal has been studied, and slag was found to remove the solute faster than fly ash. The Frumkin isotherm was found to be the most appropriate equation for constructing adsorption isotherms from the experimental adsorption data. The values of the isotherm constants have been obtained.

Levels of brominated flame retardants and other pesistent organic pollutants in breast milk samples from Limpopo Province, South Africa.

The non-occupational exposure to brominated flame retardants, and other persistent organic pollutants (POPs) was studied by collecting human breast milk samples from mothers residing in Thohoyandou area, a rural district in the Limpopo Province, northern part of South Africa (SA). Of all collected samples to be analysed (n=28), those with large enough milk volumes, (n=14) were quantified for polybrominated diphenyl ethers (PBDEs) (9 congeners: BDE-28, 47, 66, 99, 100, 138, 153, 154, and 183) and hexabromocyclododecane (HBCD) on a GC equipped with dual capillary columns and dual electron-capture detectors (ECD). The levels of PBDE congeners (median sumBDE 1.3 ng/g of lipids) and of HBCD were not far from levels generally found in European studies, and this study may be the first report on the presence of PBDEs and HBCD in SA breast milk. On a congener basis, the finding of comparably high BDE-183 levels suggests a specific PBDE usage, or contamination situation in SA. Apart from BFRs, the high DDT levels found in the breast milk from this area (median and maximum sumDDT levels of about 4600 and over 20,000 ng/g of lipids, respectively; n=28) have earlier been reported. In addition, other POPs (PCBs, HCB and HCHs) were found in SA breast milk, at relatively low levels. To conclude, measurable levels of PBDEs and HBCD, and a specific BDE congener pattern, were found in breast milk from the Limpopo province, SA. A number of other POPs, including DDTs in high levels, were also present.

Application of maize tassel for the removal of Pb, Se, Sr, U and V from borehole water contaminated with mine wastewater in the presence of alkaline metals.

In this study, the removal of Pb(II) from aqueous solutions by tassel powder was studied and optimised. Batch experiments were conducted on simulated solutions using tassel powder adsorbent and the effects of contact time, pH and concentration on the extent of Pb (II) removal was studied. Equilibrium and kinetic models for Pb(II) sorption were developed by considering the effect of contact time and concentration at optimum pH 4 and fixed temperature(25 degrees C). The Freundlich model was found to describe the sorption energetics of Pb(II) on tassel more fully than the Langmuir. A maximum Pb(II) loading capacity of 333.3mg/g on tassel was obtained. The adsorption process could be well described by both the Langmuir and Freundlich isotherms with R(2) values of 0.957 and 0.972, respectively. The kinetic parameters were obtained by fitting data from the effect of contact time on adsorption capacity into the pseudo-first, pseudo-second-order and intra-particle diffusion equations. The kinetics of Pb(II) on tassel surface was well defined using linearity coefficients (R(2)) by pseudo-second-order (0.999), followed by pseudo-first-order (0.795) and lastly intra-particle diffusion (0.6056), respectively. The developed method was then applied to environmental samples taken from borehole waters contaminated with mine wastewater. The removal of Pb (ND-100%), Se (100%), Sr (5.41-59.0%), U (100%) and V (46.1-100%) was attained using tassel. The uptake of the metals from environmental samples was dependent on pH, ionic strength and levels of other competing species.

Recent Advances in Polymeric Materials Used as Electron Mediators and Immobilizing Matrices in Developing Enzyme Electrodes

Different classes of polymeric materials such as nanomaterials, sol-gel materials, conducting polymers, functional polymers and biomaterials have been used in the design of sensors and biosensors. Various methods have been used, for example from direct adsorption, covalent bonding, crossing-linking with glutaraldehyde on composites to mixing the enzymes or use of functionalized beads for the design of sensors and biosensors using these polymeric materials in recent years. It is widely acknowledged that analytical sensing at electrodes modified with polymeric materials results in low detection limits, high sensitivities, lower applied potential, good stability, efficient electron transfer and easier immobilization of enzymes on electrodes such that sensing and biosensing of environmental pollutants is made easier. However, there are a number of challenges to be addressed in order to fulfill the applications of polymeric based polymers such as cost and shortening the long laboratory synthetic pathways involved in sensor preparation. Furthermore, the toxicological effects on flora and fauna of some of these polymeric materials have not been well studied. Given these disadvantages, efforts are now geared towards introducing low cost biomaterials that can serve as alternatives for the development of novel electrochemical sensors and biosensors. This review highlights recent contributions in the development of the electrochemical sensors and biosensors based on different polymeric material. The synergistic action of some of these polymeric materials and nanocomposites imposed when combined on electrode during sensing is discussed.

An amperometric biosensor based on horseradish peroxidase immobilized onto maize tassel-multi-walled carbon nanotubes modified glassy carbon electrode for determination of heavy metal ions in aqueous solution.

A biosensor for trace metal ions based on horseradish peroxidase (HRP) immobilized on maize tassel-multiwalled carbon nanotube (MT-MWCNT) through electrostatic interactions is described herein. The biosensor was characterized using Fourier transform infrared (FTIR), UV-vis spectrometry, voltammetric and amperometric methods. The FTIR and UV-vis results inferred that HRP was not denatured during its immobilization on MT-MWCNT composite. The biosensing principle was based on the determination of the cathodic responses of the immobilized HRP to H₂O₂, before and after incubation in trace metal standard solutions. Under optimum conditions, the inhibition rates of trace metals were proportional to their concentrations in the range of 0.092-0.55 mg L⁻¹, 0.068-2 mg L⁻¹ for Pb²⁺ and Cu²⁺ respectively. The limits of detection were 2.5 μg L⁻¹ for Pb²⁺ and 4.2 μg L⁻¹ for Cu²⁺. Representative Dixon and Cornish-Bowden plots were used to deduce the mode of inhibition induced by the trace metal ions. The inhibition was reversible and mixed for both metal ions. Furthermore, the biosensor showed good stability, selectivity, repeatability and reproducibility.

Organochlorine residues in maternal milk from inhabitants of the Thohoyandou area, South Africa

The presence of organochlorine compounds (OC) such as DDT and their metabolites in the environment have created a significant environmental concern over the years due to adverse effects. Consequently, DDT has been banned in many countries. However, it is still used in some countries including South Africa, particularly for vector-borne disease eradication programmes. Since the presence of DDT and its metabolites may provide an indication of the general exposure and use of these compounds, there was a need for such a study. Human breast milk samples (n = 30) were collected from mothers within the age range of 19–40 years from the Thohoyandou area, South Africa. The liquid–liquid extraction method was used to extract DDT and its metabolites from the samples. The crude extracts were subjected to column chromatography for measurements of OC levels. The concentration ranges of the contaminants were as follows: not detected (ND) to1770 ng g−1 (2,4′-DDE); ND to 3977 ng g−1 (4,4′-DDE); ND to 3250 ng g−1 (2,4′-DDD); ND to 2580 ng g−1 (4,4′-DDD) and ND to 2847 ng g−1 (4,4′-DDT). The mean ΣDDE, ΣDDD and ΣDDT obtained from the villages were 1180 ng g−1, 830 ng g−1 and 690 ng g−1, respectively. The total DDT ranged from 820–7473 ng g−1. The estimated daily intake varied from 260 to 4696 ng g−1, ND-10551 ng g−1 and ND-4237 ng g−1 for DDE, DDD and DDT, respectively. These values are significantly higher than the FAO/WHO acceptable daily intake (ADI) of 20 ng g−1. The ΣDDT was found to decrease with increasing age of the mothers. The observed high levels of DDE compared to DDT indicated chronic exposure of the mothers to DDT, which is metabolized to DDE and retained in the body.