Nancy Ornelas-Soto

Extraction and purification of high-value metabolites from microalgae: essential lipids, astaxanthin and phycobiliproteins.

The marked trend and consumers growing interest in natural and healthy products have forced researches and industry to develop novel products with functional ingredients. Microalgae have been recognized as source of functional ingredients with positive health effects since these microorganisms produce polyunsaturated fatty acids, polysaccharides, natural pigments, essential minerals, vitamins, enzymes and bioactive peptides. For this reason, the manuscript reviews two of the main high‐value metabolites which can be obtained from microalgae: pigments and essential lipids. Therefore, the extraction and purification methods for polyunsaturated fatty acids, astaxanthin, phycoerythrin and phycocyanin are described. Also, the effect that environmental growth conditions have in the production of these metabolites is described. This review summarizes the existing methods to extract and purify such metabolites in order to develop a feasible and sustainable algae industry.

Silica nanoparticles induce cardiotoxicity interfering with energetic status and Ca2+ handling in adult rat cardiomyocytes

Recent evidence has shown that nanoparticles that have been used to improve or create new functional properties for common products may pose potential risks to human health. Silicon dioxide (SiO2) has emerged as a promising therapy vector for the heart. However, its potential toxicity and mechanisms of damage remain poorly understood. This study provides the first exploration of SiO2-induced toxicity in cultured cardiomyocytes exposed to 7- or 670-nm SiO2 particles. We evaluated the mechanism of cell death in isolated adult cardiomyocytes exposed to 24-h incubation. The SiO2 cell membrane association and internalization were analyzed. SiO2 showed a dose-dependent cytotoxic effect with a half-maximal inhibitory concentration for the 7 nm (99.5 ± 12.4 µg/ml) and 670 nm (>1,500 µg/ml) particles, which indicates size-dependent toxicity. We evaluated cardiomyocyte shortening and intracellular Ca2+ handling, which showed impaired contractility and intracellular Ca2+ transient amplitude during β-adrenergic stimulation in SiO2 treatment. The time to 50% Ca2+ decay increased 39%, and the Ca2+ spark frequency and amplitude decreased by 35 and 21%, respectively, which suggest a reduction in sarcoplasmic reticulum Ca2+-ATPase (SERCA) activity. Moreover, SiO2 treatment depolarized the mitochondrial membrane potential and decreased ATP production by 55%. Notable glutathione depletion and H2O2 generation were also observed. These data indicate that SiO2 increases oxidative stress, which leads to mitochondrial dysfunction and low energy status; these underlie reduced SERCA activity, shortened Ca2+ release, and reduced cell shortening. This mechanism of SiO2 cardiotoxicity potentially plays an important role in the pathophysiology mechanism of heart failure, arrhythmias, and sudden death.NEW & NOTEWORTHY Silica particles are used as novel nanotechnology-based vehicles for diagnostics and therapeutics for the heart. However, their potential hazardous effects remain unknown. Here, the cardiotoxicity of silica nanoparticles in rat myocytes has been described for the first time, showing an impairment of mitochondrial function that interfered directly with Ca2+ handling.

Assessing Lead, Nickel, and Zinc Pollution in Topsoil from a Historic Shooting Range Rehabilitated into a Public Urban Park

Soil contamination is a persistent problem in the world. The redevelopment of a site with a historical deposition of metals might conceal the threat of remaining pollution, especially when the site has become a public place. In this study, human health risk assessment is performed after defining the concentrations of Pb, Ni, and Zn in the topsoil of a former shooting range rehabilitated into a public park in the Municipality of Kesariani (Athens, Greece). A methodology that uses inductively coupled plasma mass spectrometry (ICP-MS, 13 samples), another that uses portable X-ray fluorescence (XRF) following a dense sample design (91 samples), and a hybrid approach that combines both, were used to obtain the concentrations of the trace elements. The enrichment factor and geoacummulation index were calculated to define the degree of pollution of the site. The hazard quotient and cancer risk indicators were also computed to find the risk to which the population is exposed. The present study reveals high non-carcinogenic health risk due to Pb pollution with ingestion as the main exposure pathway. The carcinogenic risk for Pb is within tolerable limits, but the definition of land use might alter such a statement. Lastly, regarding Ni and Zn, the site is unpolluted and there is insignificant carcinogenic and non-carcinogenic risks.

Differential cytotoxicity and internalization of graphene family nanomaterials in myocardial cells

Given the well-known physical properties of graphene oxide (GO), numerous applications for this novel nanomaterial have been recently envisioned to improve the performance of biomedical devices. However, the toxicological assessment of GO, which strongly depends on the used material and the studied cell line, is a fundamental task that needs to be performed prior to its use in biomedical applications. Therefore, the toxicological characterization of GO is still ongoing. This study contributes to this, aiming to synthesize and characterize GO particles and thus investigate their toxic effects in myocardial cells. Herein, GO particles were produced from graphite using the Tour method and subsequent mild reduction was carried out to obtain low-reduced GO (LRGO) particles. A qualitative analysis of the viability, cellular uptake, and internalization of particles was carried out using GO (~54% content of oxygen) and LRGO (~37% content of oxygen) and graphite. GO and LRGO reduce the viability of cardiac cells at IC50 of 652.1±1.2 and 129.4±1.2μg/mL, respectively. This shows that LRGO particles produce a five-fold increase in cytotoxicity when compared to GO. The cell uptake pattern of GO and LRGO particles demonstrated that cardiac cells retain a similar complexity to control cells. Morphological alterations examined with electron microscopy showed that internalization by GO and LRGO-treated cells (100μg/mL) occurred affecting the cell structure. These results suggest that the viability of H9c2 cells can be associated with the surface chemistry of GO and LRGO, as defined by the amount of oxygen functionalities, the number of graphitic domains, and the size of particles. High angle annular dark-field scanning transmission electron microscopy, dynamic light-scattering, Fourier-transform infrared, Raman, and X-ray photoelectron spectroscopies were used to characterize the as-prepared materials.

Interaction of TGA@CdTe Quantum Dots with an Extracellular Matrix of Haematococcus pluvialis Microalgae Detected Using Surface-Enhanced Raman Spectroscopy (SERS).

The present study reports the localization and interaction of thioglycolic acid (TGA) capped CdTe quantum dots (TGA@CdTe QDs) within the extracellular matrix (ECM) of Haematococcus pluvialis (Chlorophyceae) microalgae (HPM) after an incubation period of 5 min. Changes in the Raman spectrum of HPM induced by the adsorption of the TGA@CdTe QDs are successfully found by using naked gold anisotropic structures as nano-sensors for surface-enhanced Raman scattering (SERS effect). Raman spectroscopy results show that TGA@CdTe QDs interact with the biomolecules present in the ECM. Sample preparation and characterization by complementary techniques such as confocal and electron microscopy are also used to confirm the presence and localization of the nanoparticles in the algae. This research shows new evidence on early accumulation of QDs in plant cells and would further improve our understanding about their environmental impact.

Enhancing internalization of silica particles in myocardial cells through surface modification

Surface modification in nanostructured mesoporous silica particles (MSNs) can significantly increase the uptake in myocardial cells. Herein, MSNs particles were synthesized and chemically functionalized to further assess their biocompatibility in rat myocardial cell line H9c2. The surface modification resulted in particles with an enhanced cellular internallization (3-fold increase) with respect to pristine particles. Apoptosis events were not evident at all, while necrosis incidence was significant only at a higher doses (>500μg/mL). In particular, the percentage of necrotic cells decrease in a statistically significant manner for the functionalized particles at lower doses than 100μg/mL. This study concludes that the proposed surface functionalization of MSNs particles does not compromise their viability on H9c2 cells, and therefore they could potentially be used for biomedical purposes. Fourier-transform infrared, Raman, TGA/DSC, N2 adsorption-desorption, and TEM techniques were used to characterize the as-prepared materials. Confocal microscopy and flow cytometry analyses were carried out to measure the histograms of cell complexity and the half maximal inhibitory concentration, respectively. Reactive oxygen species generation was accessed using assays with MitoSOX and Amplex Red fluoroprobes.

Laccases: A Blue Enzyme for Greener Alternative Technologies in the Detection and Treatment of Emerging Pollutants

The continuous contamination of worldwide water bodies, by the presence of emerging pollutants, has raised great importance over the last decades. This group of pollutants comprises a large variety of chemicals, comprehending household and personal care products, human and veterinary drugs, as well as industrial compounds. Although, scientific data have made evident the potential threats of the emerging pollutants to public and environmental health, there is still limited information available concerning the ecotoxicity, concentration, and distribution of these compounds, which makes their ecological regulation, detection, and treatment very difficult. Thus, the search for green technologies to detect and treat potential environmental pollutants is critical for ecological and human health protection. In this context, laccases have gained scientific interest due to their broad substrate range, including recalcitrant environmental pollutants, and their ability to use only oxygen as a co-substrate. This work explores the potential of laccase enzyme as element of biosensing and bioremediation, and identifies the drawbacks that have to be overcome in order to demonstrate their feasibility and implement a large-scale process.

Characterization of soil contamination by lead around a former battery factory by applying an analytical hybrid method

Former battery factories have created environmental and health problems for years and the exposure to lead in surface soils has been underestimated. Nonetheless, the identification of lead contamination and its spatial distribution is crucial. The determination of heavy metals in soils can be performed using inductively coupled plasma mass spectrometry (ICP-MS). However, alternative techniques such as X-ray fluorescence (XRF) have been used lately in environmental studies since measurements can be taken in the field in a prompt manner, despite its lower accuracy. In this study, a former battery factory site in Monterrey, Mexico, has been studied in order to detect lead contamination. Soil samples were assessed for contamination by using an analytical hybrid method that comprises both analytical techniques, namely, ICP-MS and XRF. Samples were taken in 215 locations and, after a simple homogenization process, they were analyzed by using a portable XRF device. Within those 215 sampling points, 25 samples were analyzed concurrently by using ICP-MS according to international sampling guidelines. Results obtained were adjusted in order to define an analytical hybrid method, which encompasses the advantages of each technique. An improved characterization was achieved by using the proposed analytical hybrid method since maps of lead distribution and calculated areas of concern showed better predictability. The combination of spectroscopic techniques is of great applicability for environmental agencies and decision makers.

Street dust from a heavily-populated and industrialized city: Evaluation of spatial distribution, origins, pollution, ecological risks and human health repercussions

Emissions from vehicles include particles from tire and brake wearing that can settle down and join industrial discharges into street dust. Metals present in street dust may create ecological and health threats and their analysis is of great environmental relevance. The city of Monterrey, Mexico is an industrial pillar of the country and shows an increasing fleet during the last years, which has yielded higher traffic and emissions. This study analyzes 44 street dust samples taken across the city for total element concentrations by using X-ray fluorescence. Associations and indicators are calculated to define possible origins, levels of pollution, natural or anthropogenic sources, and ecological and human health risks. High concentrations of As, Ba, Cu, Fe, Mo, Ni, Pb, Ti, and Zn were found. Main sources of metals were defined as: tire wearing for Zn and Fe; brake wearing for Ba, Cu, Fe, Pb and Zr; additional industrial sources for Mo, Ni, Pb, and Ti; and other natural sources for As. Ecological risk was found to be moderate across the city and risk due to Pb concentrations was established for children.

Proximal soil sensing of trace elements: Interferences on field measurements using XRF

Proximal soil sensing can contribute to the proper monitoring of soil contamination. The main goal of this study is to find the interferences generated by set-ups that differ from international guidelines when analyzing trace elements in soil using X-ray fluorescence (XRF) proximal sensors. The use of commercial polypropylene bags as covers and a device that is not in complete contact with the sample are contrasted to define the minimum possible characteristics of such settings to obtain consistent measurements. Results are element dependent, but in general, commercial polypropylene bags of up to 100 μm are suitable, and the distance between the sample and the source should be kept to a maximum of 2 mm to obtain reliable readings.