Naoko Tajima

Mass Range and Optimized Operation of the Aerosol Particle Mass Analyzer

We investigated, theoretically, the mass range in which an aerosol particle mass analyzer (APM) can be used for classification, and how the APM classification performance can be optimized. We listed factors that set limits to the APM, which were constraints of the rotation speed and the voltage, as well as requirements on the APM classification performance parameter, λ, that guarantee at least minimal performance in both resolution and penetration. We introduced the APM operation diagram, which is a tool to visualize the limits and mass range. We proposed to operate the APM that was considered in this study with the λ value set within the range from 0.25 to 0.5 for optimum classification performance by balancing both resolution and penetration. The mass range for the APM, with the λ value maintained between 0.25 and 0.5, was calculated to be from 0.003 to 2000 fg, which corresponds to the diameter range from 20 to 1600 nm for the density of 1 g/cm3. To verify the validity of the mass range and the idea of the optimized operation, we carried out experiments on an APM with polystyrene and sodium-chloride particles that were classified by electrical mobility. We found that the APM was able to provide bell-shaped spectra down to 12 nm, and was able to perform mass classification with an accuracy better than 5% down to 50 nm. Underestimation of mass and reduction of resolution and penetration were observed at sizes smaller than about 30 nm.

Design Considerations and Performance Evaluation of a Compact Aerosol Particle Mass Analyzer

A compact aerosol particle mass analyzer (APM) of which the size of the classifier was significantly reduced than that of the first commercial model (Kanomax Model 3600) was developed. Firstly, requirements for desired performance in classifying particle mass were set forth. Secondly, a theoretical framework for the design parameters of an APM that satisfies the requirements was formulated. Thirdly, the design parameters were determined that satisfies the requirements while reducing the instrument size. The requirements include the condition that the classification range covers from 0.001 to 1000 fg (approximately 12 to 1200 nm in size for spherical particles having the density of 1 g/cm3), and the condition that both the classification resolution and particle penetration in this mass range are higher than certain specified values. A prototype having the design parameters determined according to this theoretical framework was constructed, and its performance was evaluated experimentally. The external dimensions of the electrodes of the compact APM are approximately 140 mm in length and 60 mm in diameter. It was confirmed that the performance of the compact APM operated at the aerosol flow rate of 0.3 L/min was comparable to that of the Model 3600 APM operated at 1 L/min. Because of the reduced size and of the resultant improved portability, it is expected that the compact APM is readily applicable to field measurements. Copyright 2013 American Association for Aerosol Research