Narendra Reddy Chereddy

A novel FRET ‘off–on’ fluorescent probe for the selective detection of Fe3+, Al3+ and Cr3+ ions: Its ultrafast energy transfer kinetics and application in live cell imaging

A rhodamine-naphthalimide dyad probe, 1, that selectively responds to the addition of trivalent metal ions (Fe(3+) or Al(3+) or Cr(3+)) via ultrafast Förster resonance energy transfer (FRET) from naphthalimide to rhodamine is designed and synthesized. 1 is highly selective to the trivalent metal ions and the presence of other monovalent or divalent metal ions do not affect its detection ability. The probe is highly sensitive and it can respond to the presence of trivalent metal ions even at sub-micromolar levels. 1 is stable over a broad range of pH, non-toxic under experimental conditions and suitable to the fluorescence bio-imaging of live cells exposed to trivalent metal ions. The trivalent metal ion induced ultrafast energy transfer kinetics of 1 is explored using time resolved fluorescence experiments.

Selective interactions of trivalent cations Fe3+, Al3+ and Cr3+ turn on fluorescence in a naphthalimide based single molecular probe

Synthesis and fluorescence turn-on behavior of a naphthalimide based probe is described. Selective interactions of trivalent cations Fe(3+), Al(3+) or Cr(3+) with probe 1 inhibit the PET operating in the probe, and thereby, permit the detection of these trivalent cations present in aqueous samples and live cells. Failure of other trivalent cations (Eu(3+), Gd(3+) and Nb(3+)) to inhibit the PET process in 1 demonstrates the role of chelating ring size vis-à-vis ionic radius in the selective recognition of specific metal ions.

A dithieno[3,2-b:2′,3′-d]pyrrole based, NIR absorbing, solution processable, small molecule donor for efficient bulk heterojunction solar cells

A novel, NIR absorbing organic small molecular donor material denoted as ICT3 with an A-D-D-D-A architecture having dithieno[3,2-b:2,3-d]pyrrole (DTP) and butylrhodanine as donor and acceptor moieties, respectively, is synthesized and its thermal, photophysical, electrochemical and photovoltaic properties are explored. ICT3 has excellent stability over a broad range of temperatures with a decomposition temperature (Td corresponds to 5% weight loss) of 372 °C, soluble in most common organic solvents (solubility up to 30 mg mL-1) and suitable for solution processing during device fabrication. ICT3 has broad (520-820 nm) and intense visible region absorption (molar excitation coefficient is 1.69 × 105 mol-1 cm-1) and has suitable HOMO and LUMO energy levels with the [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) acceptor for efficient exciton dissociation and charge transfer. Bulk heterojunction solar cells (BHJSCs) with an indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS)/ICT3:PC71BM/poly(9,9-bis(3-(N,N-dimethylamino)propyl)fluorene-2,7-diyl)-alt-(9,9-dioctylfluorene-2,7-diyl) (PFN)/aluminium (Al) structure are fabricated and the BHJSCs with the active layer as cast from chloroform solution displayed a power conversion efficiency (PCE) of 3.04% (JSC = 8.22 mA cm-2, VOC = 0.86 V and FF = 0.43). Annealing the active layer significantly improved the PCE of these BHJSCs. While thermal annealing of the active layer improved the PCE of the BHJSCs to 4.94%, thermal followed by solvent vapour annealing enhanced the PCE to 6.53%. X-ray diffraction and atomic force microscopy analyses are carried out on the active layer and these results revealed that annealing treatment improves the crystallinity and nanoscale morphology of the active layer, enriches the device exciton generation and dissociation efficiency, charge transport and collection efficiency and reduces carrier recombination. The observed higher PCE (6.53%) of the BHJSCs having ICT3 with a DTP donor moiety broadens the scope to develop new, efficient DTP based small molecular donor materials for BHJSCs.

A detailed study on the thermal, photo-physical and electrochemical properties and OFET applications of D–π–A–π–D structured unsymmetrical diketopyrrolopyrrole materials

A series of seven unsymmetrical diketopyrrolopyrrole (DPP) derivatives with donor–pi–acceptor–pi–donor (D–π–A–π–D) architecture have been designed, synthesized and well characterised. The effect of the electron donating capacity and extent of electronic conjugation of the end-capping units on the thermal, photo-physical and electrochemical properties of the synthesized materials was thoroughly investigated using various experimental techniques and theoretical calculations. Organic field-effect transistors (OFETs) were fabricated using these materials to obtain their hole/electron transporting characteristics. All these materials showed moderate to good hole transporting ability, and the OFET fabricated using the DPP-derivative with benzofuran and pyrene end groups exhibited a hole mobility of 6.7 × 10−4 cm2 V−1 s−1 with VT of −9 V. The observed photo-physical, electrochemical, thermal, and charge carrier properties of the synthesized DPP-derivatives indicated their applicability in various areas like organic photovoltaics, disposable electronics and biomedical devices.