Nathalie R. Wingert

Characterization of three main degradation products from novel oral anticoagulant rivaroxaban under stress conditions by UPLC-Q-TOF-MS/MS

Drugs of long-term use may cause the accumulation of chemical compounds in human body. Therefore, the evaluation and structure characterization of synthesis and degradation impurities is substantial to guarantee drug safety and successful pharmaceutical therapy. The present work evaluated the anticoagulant rivaroxabana (RIV) under stress conditions in order to elucidate the chemical structure of major degradation products (DPs) formed after drug exposition to acid and alkaline hydrolysis, and UVC radiation. Analyses were performed in UPLC coupled to quadrupole time-of-flight MS. ESI was applied in positive mode, and C18 Agilent(®) column (2.1×50 mm, 1.8 μm) used for separation of compounds. RIV molecular íon [M+H](+) (m/z 436.07) was fragmented under 20 kV, best energetic condition to obtain clear and reproducible fragmentation pattern, assisting identification of RIV DPs. With support from UPLC separation and specific detection by MS/MS, three main degradation products (DP-1, DP-2, and DP-3) formed under stress conditions were successfully characterized. Presented study agrees with requirements for analytical assessment of impurities in pharmaceutical formulations, ensuring quality of pharmaceutical substances.

Application of Quality by Design to optimize a stability-indicating LC method for the determination of ticagrelor and its impurities

&NA; Simultaneous analysis of drug compounds and their impurities of degradation and synthesis became constant in the modern pharmaceutical analysis. Likewise, analytical techniques must improve sensitivity and selectivity for the monitoring of pharmaceutical products, allowing a full assessment of impurities in drug products and, therefore, ensure safety and efficacy of pharmacological treatments. The application of Quality by Design (QbD) principles has proved to be feasible on the elaboration of analytical methods, allowing the comprehensive evaluation and measurement of different analytical parameters and their effects on critical properties of the methodology in development. QbD approach was applied to the development of a fast and selective HPLC method for the analysis of the antiplatelet aggregation drug ticagrelor and its degradation products in presence of three impurities of synthesis. Fractional factorial resolution V was the screening experimental design applied to five method parameters. Response surface methodology was carried by central composite star face design on the two critical method parameters selected. Analytical design space, established after the application of Monte‐Carlo simulations, verified whether predicted results were in accordance with critical quality attributes. The developed and validated HPLC method with DAD detection at 225nm was able to resolve eight related compounds in less than three minutes. Graphical Abstract: Symbol. No Caption available.

Quantitative Assessment of Poorly Soluble Anticoagulant Rivaroxaban by Microemulsion Electrokinetic Chromatography

Microemulsion electrokinetic chromatography (MEEKC) is an electrophoretic methodology based on the separation of compounds by a microemulsionated electrolyte. There are few options for the evaluation of the stability and content of the oral anticoagulant rivaroxaban (RIV) in pharmaceutical formulations. RIV has low water solubility and undergoes ionization only under restricted pH conditions (pH < 1 or pH > 13), thus, hindering the application of free zone capillary electrophoresis as an analytical method. Therefore, the work aimed at developing and validating a stability-indicating MEEKC method for the analysis of RIV in pharmaceutical formulations. Separation was performed in a fused-silica capillary applying a voltage of 30 kV. The microemulsion system consisted of 13 mM tetraborate, pH 9.75 + 1.2% SDS + 1.0% ethyl acetate + 2.4% butanol. The linearity range was 25-150 μg mL-1, with r = 0.9982. Drug degradations were performed in acid and basic media (HCl 1 M and NaOH 0.1 M, respectively), oxidation with 3%H2O2, 60°C temperature and exposure to UV-C radiation. No interferences with RIV or internal standard peaks were detected. Method robustness was accessed through Plackett-Burman experimental design, after evaluation of model validity. Trueness values between 100.49 and 100.68% were obtained with repeatability. The method developed was found appropriate for quality control of RIV tablets, as a consistent analytical technique that is considered less damaging to the environment due to its low consumption of organic reagents.

In vitro toxicity assessment of rivaroxaban degradation products and kinetic evaluation to decay process

Abstract Degradation kinetics of oral anticoagulant rivaroxaban (RIV) was assessed in acid and alkaline media and while exposed to UVC radiation. Among all stress conditions tested, kinetic degradation process was better described by a zero-order model. A stability indicating method was validated for the analysis of the anticoagulant RIV in tablets by high-performance liquid chromatography. Robustness was evaluated with a two-level Plackett–Burman experimental design. The effect of acute exposition of the human hepatoblastoma HepG2 cell line to RIV stressed samples (100 and 500 µM) was assessed through in vitro toxicity tests. MTT reduction, neutral red uptake, mitochondrial membrane potential, and low molecular weight DNA diffusion assays were employed for cytotoxicity evaluation (5×104 cells/well). The genotoxic potential was assessed by comet assay (2×104 cells/well). Acute toxicity to HepG2 cells was assessed after 24 h incubation with sample solutions, for each test. A direct relationship between the increased amount of alkaline degradation products and higher cytotoxic potential was found. Results obtained by viability assay investigations support the concerns on risks associated with acute toxicity and genotoxicity of pharmaceutical samples containing degradation products as impurities.

In vitro dissolution method fitted to in vivo absorption profile of rivaroxaban immediate-release tablets applying in silico data

Abstract Objective: This study aimed to develop and validate an in vitro dissolution method based on in silico–in vivo data to determine whether an in vitro–in vivo relationship could be established for rivaroxaban in immediate-release tablets. Significance: Oral drugs with high permeability but poorly soluble in aqueous media, such as the anticoagulant rivaroxaban, have a major potential to reach a high level of in vitro–in vivo relationship. Currently, there is no study on scientific literature approaching the development of RIV dissolution profile based on its in vivo performance. Methods and results: Drug plasma concentration values were modeled using computer simulation with adjustment of pharmacokinetic properties. Those values were converted into drug fractions absorbed by the Wagner–Nelson deconvolution approach. Gradual and continuous dissolution of RIV tablets was obtained with a 30 rpm basket on 50 mM sodium acetate +0.2% SDS, pH 6.5 medium. Dissolution was conducted for up to 180 min. The fraction absorbed was plotted against the drug fraction dissolved, and a linear point-to-point regression (R2 = 0.9961) obtained. Conclusion: The in vitro dissolution method designed promoted a more convenient dissolution profile of RIV tablets, whereas it suggests a better relationship with in vivo performance.