Nenad D. Pavlović

Adaptive neuro fuzzy controller for adaptive compliant robotic gripper

The requirement for new flexible adaptive grippers is the ability to detect and recognize objects in their environments. It is known that robotic manipulators are highly nonlinear systems, and an accurate mathematical model is difficult to obtain, thus making it difficult @?@? control using conventional techniques. Here, a novel design of an adaptive neuro fuzzy inference strategy (ANFIS) for controlling input displacement of a new adaptive compliant gripper is presented. This design of the gripper has embedded sensors as part of its structure. The use of embedded sensors in a robot gripper gives the control system the ability to control input displacement of the gripper and to recognize particular shapes of the grasping objects. Since the conventional control strategy is a very challenging task, fuzzy logic based controllers are considered as potential candidates for such an application. Fuzzy based controllers develop a control signal which yields on the firing of the rule base. The selection of the proper rule base depending on the situation can be achieved by using an ANFIS controller, which becomes an integrated method of approach for the control purposes. In the designed ANFIS scheme, neural network techniques are used to select a proper rule base, which is achieved using the back propagation algorithm. The simulation results presented in this paper show the effectiveness of the developed method.

Adaptive neuro-fuzzy estimation of conductive silicone rubber mechanical properties

Highlights? Adaptive neuro-fuzzy estimation of conductive silicone rubber properties. ? Adaptive neuro-fuzzy network to approximate correlation between measured features of the material. ? Adaptive neuro-fuzzy network to predict the conductive silicone rubber future behavior for stress changing. ? A new constitutive model of the conductive silicone rubber. ? A new type of stress prediction model based on artificial neural network. Conductive silicone rubber has great advantages for tactile sensing applications. The electrical behavior of the elastomeric material is rate-dependent and exhibit hysteresis upon cyclic loading. Several constitutive models were developed for mechanical simulation of this material upon loading and unloading. One of the successful approaches to model the time-dependent behavior of elastomers is Bergstrom-Boyce model. An adaptive neuro-fuzzy inference system (ANFIS) model will be established in this study to predict the stress-strain changing of conductive silicone rubber during compression tests. Various compression tests were performed on the produced specimens. An ANFIS is used to approximate correlation between measured features of the material and to predict its unknown future behavior for stress changing. ANFIS has unlimited approximation power to match any nonlinear functions well and to predict a chaotic time series.

Adaptive neuro fuzzy estimation of underactuated robotic gripper contact forces

It is known that robotic manipulators are highly nonlinear systems, and an accurate mathematical model is difficult to obtain, thus making it difficult t@? analyze with conventional analytical methods. Here, a novel design of an adaptive neuro fuzzy inference system (ANFIS) for estimation contact forces of a new adaptive gripper is presented. Since the conventional analytical methods is a very challenging task, fuzzy logic based systems are considered as potential candidates for such an application. The main points of this paper are in explanation of kinetostatic analyzing of the new gripper structure using rigid body model with added compliance in every single joint. The experimental results can be used as training data for ANFIS network for estimation of gripping forces. An adaptive neuro-fuzzy network is used to approximate correlation between contact point locations and contact forces magnitudes. The simulation results presented in this paper show the effectiveness of the developed method. This system is capable to find any change in ratio of positions of the gripper contacts and magnitudes of the contact forces and thus indicates state of both finger phalanges.

Intelligent rotational direction control of passive robotic joint with embedded sensors

Passive compliant joints with springs and dampers ensure a smooth contact with the surroundings, especially if robots are in contact with humans, but the passive compliant joints cannot determine precisely the position of the members of the joint or direction of the collision force. In this paper was proposed the structure of a passive compliant robotic joint with conductive silicone rubber elements as internal embedded sensors. The sensors can operate as absorbers of excessive external collision force instead of springs and dampers and can be used for some measurements. Therefore, this joint presents one type of safe robotic mechanisms with an internally measuring system. The sensors were made by press-curing from carbon-black filled silicone rubber which is an electro active material. Various compression tests of the sensors were done. The main task of this study is to investigate the application of a control algorithm for detecting the direction of the robotic joint angular rotation when subjected to an external collision force. Soft computing methodology, adaptive neuro fuzzy inference strategy (ANFIS), was used for the controller development. The simulation results presented in this paper show the effectiveness of the developed method.

Input Displacement Neuro-fuzzy Control and Object Recognition by Compliant Multi-fingered Passively Adaptive Robotic Gripper

The requirement for new flexible adaptive grippers is the ability to detect and recognize objects in their environments. It is known that robotic manipulators are highly nonlinear systems, and an accurate mathematical model is difficult to obtain, thus making it difficult make decision strategies using conventional techniques. Here, an adaptive neuro fuzzy inference system (ANFIS) for controlling input displacement and object recognition of a new adaptive compliant gripper is presented. The grasping function of the proposed adaptive multi-fingered gripper relies on the physical contact of the finger with an object. This design of the each finger has embedded sensors as part of its structure. The use of embedded sensors in a robot gripper gives the control system the ability to control input displacement of the gripper and to recognize particular shapes of the grasping objects. Fuzzy based controllers develop a control signal according to grasping object shape which yields on the firing of the rule base. The selection of the proper rule base depending on the situation can be achieved by using an ANFIS strategy, which becomes an integrated method of approach for the control purposes. In the designed ANFIS scheme, neural network techniques are used to select a proper rule base, which is achieved using the back propagation algorithm. The simulation results presented in this paper show the effectiveness of the developed method.

Development of a new type of passively adaptive compliant gripper

Purpose – Passively compliant underactuated mechanisms are one way to obtain the gripper which could accommodate to any irregular and sensitive grasping object. The purpose of the underactuation is to use less active inputs than the number of degrees of freedom of the gripper mechanism to drive the open and close motion of the gripper. Another purpose of underaction is to reduce the number of control variables. Design/methodology/approach – The underactuation can morph shapes of the gripper to accommodate different objects. As a result, the underactuated grippers require less complex control algorithms. The fully compliant mechanism has multiple degrees of freedom and can be considered as an underactuated mechanism. Findings – This paper presents a new design of the adaptive underactuated compliant gripper with distributed compliance. The optimal topology of the gripper structure was obtained by optimality criteria method using mathematical programming technique. Afterwards, the obtained model was improve...

Adaptive neuro-fuzzy prediction of grasping object weight for passively compliant gripper

The development of universal grippers able to pick up unfamiliar objects of widely varying shapes and surfaces is a very challenging task. Passively compliant underactuated mechanisms are one way to obtain the gripper which could accommodate to any irregular and sensitive grasping objects. The purpose of the underactuation is to use the power of one actuator to drive the open and close motion of the gripper. The fully compliant mechanism has multiple degrees of freedom and can be considered as an underactuated mechanism. This paper presents a new design of the adaptive underactuated compliant gripper with distributed compliance. The optimal topology of the gripper structure was obtained by iterative finite element method (FEM) optimization procedure. The main points of this paper are in explanation of a new sensing capability of the gripper for grasping and lifting up the gripping objects. Since the sensor stress depends on weight of the grasping object it is appropriate to establish a prediction model for estimation of the grasping object weight in relation to sensor stress. A soft computing based prediction model was developed. In this study an adaptive neuro-fuzzy inference system (ANFIS) was used as soft computing methodology to conduct prediction of the grasping objects weight. The training and checking data for the ANFIS network were obtained by FEM simulations.

Support vector regression methodology for prediction of input displacement of adaptive compliant robotic gripper

The prerequisite for new versatile grippers is the capability to locate and perceive protests in their surroundings. It is realized that automated controllers are profoundly nonlinear frameworks, and a faultless numerical model is hard to get, in this way making it troublesome to control utilizing tried and true procedure. Here, a design of an adaptive compliant gripper is presented. This design of the gripper has embedded sensors as part of its structure. The use of embedded sensors in a robot gripper gives the control system the ability to control input displacement of the gripper and to recognize specific shapes of the grasping objects. Since the conventional control strategy is a very challenging task, soft computing based controllers are considered as potential candidates for such an application. In this study, the polynomial and radial basis function (RBF) are applied as the kernel function of Support Vector Regression (SVR) to estimate and predict optimal inputs displacement of the gripper according to experimental tests and shapes of grasping objects. Instead of minimizing the observed training error, SVR poly and SVR rbf attempt to minimize the generalization error bound so as to achieve generalized performance. The experimental results show that an improvement in predictive accuracy and capability of generalization can be achieved by the SVR approach compared to other soft computing methodology.

Application of the TRIZ creativity enhancement approach to the design of a passively adaptive compliant robotic gripper

Purpose – The essence of the conceptual design is getting the innovative projects or ideas to ensure the products with best performance. It has been proved that the theory of inventive problem solution (TRIZ) is a systematic methodology for innovation. The purpose of this paper is to illustrate the design of an adaptive robotic gripper as an engineering example to show the significance and approaches of applying TRIZ in getting the creative conceptual design ideas.Design/methodology/approach – Gripping and holding of objects are key tasks for robotic manipulators. The development of universal grippers able to pick up unfamiliar objects of widely varying shapes and surfaces is a very challenging task. The requirement for new adaptive grippers is the ability to detect and recognize objects in their environments.Findings – The main aim of this work is to show a systematic methodology for innovation as an effective procedure to enhance the capability of developing innovative products and to overcome the main ...

Determining the joints most strained in an underactuated robotic finger by adaptive neuro-fuzzy methodology

The main purpose of this paper is to determine what joints are most strained in the proposed underactuated finger by adaptive neuro-fuzzy methodology. For this, kinetostatic analysis of the finger structure is established with added torsional springs in every single joint. Since the finger’s grasping forces depend on torsional spring stiffness in the joints, it is preferable to determine which joints have the most influence on grasping forces. Hence, the finger joints experiencing the most strain during the grasping process should be determined. It is desirable to select and analyze a subset of joints that are truly relevant or the most influential to finger grasping forces in order to build a finger model with optimal grasping features. This procedure is called variable selection. In this study, variable selection is modeled using the adaptive neuro-fuzzy inference system (ANFIS). Variable selection using the ANFIS network is performed to determine how the springs implemented in the finger joints affect the output grasping forces. This intelligent algorithm is applied using the Matlab environment and the performance is analyzed. The simulation results presented in this paper show the effectiveness of the developed method.