Nevena Ž. Prlainović

Immobilization of lipase from Candida rugosa on Sepabeads®: the effect of lipase oxidation by periodates

The objective of this paper was the investigation of a suitable Sepabeads® support and method for immobilization of lipase from Candida rugosa. Three different supports were used, two with amino groups, (Sepabeads® EC-EA and Sepabeads® EC-HA), differing in spacer length (two and six carbons, respectively) and one with epoxy group (Sepabeads® EC-EP). Lipase immobilization was carried out by two conventional methods (via epoxy groups and via glutaraldehyde), and with periodate method for modification of lipase. The results of activity assays showed that lipase retained 94.8% or 87.6% of activity after immobilization via epoxy groups or with periodate method, respectively, while glutaraldehyde method was inferior with only 12.7% of retention. The immobilization of lipase, previously modified by periodate oxidation, via amino groups has proven to be more efficient than direct immobilization of lipase via epoxy groups. In such a way immobilized enzyme exhibited higher activity at high reaction temperatures and higher thermal stability.

Decolorization of Anthraquinonic Dyes from Textile Effluent Using Horseradish Peroxidase: Optimization and Kinetic Study

Two anthraquinonic dyes, C.I. Acid Blue 225 and C.I. Acid Violet 109, were used as models to explore the feasibility of using the horseradish peroxidase enzyme (HRP) in the practical decolorization of anthraquinonic dyes in wastewater. The influence of process parameters such as enzyme concentration, hydrogen peroxide concentration, temperature, dye concentration, and pH was examined. The pH and temperature activity profiles were similar for decolorization of both dyes. Under the optimal conditions, 94.7% of C.I. Acid Violet 109 from aqueous solution was decolorized (treatment time 15 min, enzyme concentration 0.15 IU/mL, hydrogen peroxide concentration 0.4 mM, dye concentration 30 mg/L, pH 4, and temperature 24°C) and 89.36% of C.I. Acid Blue 225 (32 min, enzyme concentration 0.15 IU/mL, hydrogen peroxide concentration 0.04 mM, dye concentration 30 mg/L, pH 5, and temperature 24°C). The mechanism of both reactions has been proven to follow the two substrate ping-pong mechanism with substrate inhibition, revealing the formation of a nonproductive or dead-end complex between dye and HRP or between H2O2 and the oxidized form of the enzyme. Both chemical oxygen demand and total organic carbon values showed that there was a reduction in toxicity after the enzymatic treatment. This study verifies the viability of use of horseradish peroxidase for the wastewaters treatment of similar anthraquinonic dyes.

A kinetic study of candida rugosa lipase-catalyzed synthesis of 4,6-dimethyl-3-cyano-2-pyridone

The synthesis of 4,6-dimethyl-3-cyano-2-pyridone was studied in a reaction catalyzed with Candida rugosa lipase. A response surface methodology (RSM) was applied for the optimization of the experimental conditions. The study showed that temperature and molar ratio cyanoacetamide/acetylacetone have a great influence on the yield of the reaction; the maximum yield was achieved at 44 oC with a molar ratio cyanoacetamide/acetylacetone of 36. The kinetics of the enzymatic synthesis of 4,6-dimethyl-3-cyano-2-pyridone was investigated, and it was determined that a ping-pong bi-ter mechanism with cyanoacetamide inhibition fits the obtained results. The mechanism of lipase-catalyzed reaction was proposed.

Novel β-galactosidase nanobiocatalyst systems for application in the synthesis of bioactive galactosides

In this study, unmodified, amino modified and cyanuric chloride functionalized amino modified nonporous fumed nano-silica particles (FNS, AFNS and CCAFNS, respectively) were used for the development of efficient nanobiocatalysts for application in the biosynthesis of bioactive galactosides, galacto-oligosaccharides (GOS). Hence, in an attempt to elucidate the mechanism of immobilization, based on available enzyme conformation, the effects of immobilization parameters (initial enzyme concentration, immobilization time and pH) were analyzed. Among all three used nano-sized supports, the one with amino groups (AFNS) exhibited the best β-galactosidase binding capacity of 220 mg g−1 support with the efficiency of ∼90% at pH 4.5 and immobilization time 3 h. The highest hydrolytic activity of ∼2200 IU g−1 was achieved, which is far higher than previously reported. Meanwhile, β-galactosidases covalently immobilized on CCAFNS and adsorbed on FNS nanoparticles were found to have similar trends with respect to immobilization efficiency (58–71%) and hydrolytic activity (∼600 IU g−1). Furthermore, thermal stability at 60 °C was increased by β-galactosidases immobilized on AFNS and CCAFNS (4 and 1.4-fold, respectively) due to the protective effect of interactions formed between enzyme molecules and the surfaces of nanoparticles. Since β-galactosidase immobilized on AFNS was the nanobiocatalyst with the highest activity and stability, it was applied in GOS production. With AFNS–β-galactosidase GOS production of 90 g L−1 h−1 was achieved as compared to 30 g L−1 h−1 by free β-galactosidase, meaning that AFNS enhanced the selectivity of β-galactosidase for transgalactosylation, which is a crucial advantage for its application in GOS production.

Detailed solvent, structural, quantum chemical study and antimicrobial activity of isatin Schiff base

The ratios of E/Z isomers of sixteen synthesized 1,3-dihydro-3-(substituted phenylimino)-2H-indol-2-one were studied using experimental and theoretical methodology. Linear solvation energy relationships (LSER) rationalized solvent influence of the solvent-solute interactions on the UV-Vis absorption maxima shifts (νmax) of both geometrical isomers using the Kamlet-Taft equation. Linear free energy relationships (LFER) in the form of single substituent parameter equation (SSP) was used to analyze substituent effect on pKa, NMR chemical shifts and νmax values. Electron charge density was obtained by the use of Quantum Theory of Atoms in Molecules, i.e. Baders analysis. The substituent and solvent effect on intramolecular charge transfer (ICT) were interpreted with the aid of time-dependent density functional (TD-DFT) method. Additionally, the results of TD-DFT calculations quantified the efficiency of ICT from the calculated charge-transfer distance (DCT) and amount of transferred charge (QCT). The antimicrobial activity was evaluated using broth microdilution method. 3D QSAR modeling was used to demonstrate the influence of substituents effect as well as molecule geometry on antimicrobial activity.

Solvent, structural, quantum chemical study and antioxidative activity of symmetrical 1-methyl-2,6-bis[2-(substituted phenyl)ethenyl]pyridinium iodides

Abstract15 symmetric 1-methyl-2,6-bis[2-(substituted phenyl)ethenyl]pyridinium iodides were synthesized in this work. Their structures were characterized using IR, 1H and 13C NMR, and UV–Vis spectroscopy. DFT calculations indicated that s-trans/s-trans conformation prevail in all compounds. The effects of specific and non-specific solvent–solute interactions on the UV–Vis absorption maxima shifts were evaluated using linear solvation-free energy relationships (LSER), i.e., Kamlet–Taft and Catalán models. A linear free energy relationship (LFER) in the form of single substituent parameter equations (SSP) was used to postulate quantitative structure–property relations of substituent effect on NMR data. TD-DFT results showed dependence of electronic transition on the substituent effects. The push–pull character of these compounds was analyzed by differences in 13C chemical shift of the ethylenic double bond in 2- and 6-positions of cross-conjugated with pyridinum central ring. Also, the quotient of the occupations for the bonding π and anti-bonding π* orbitals of this bond was considered. Good correlations of the selected parameter between double bond lengths with π*/π and 13C chemical shift differences of the bridging group proved them to be adequate descriptor of push–pull character. Synthesized compounds were screened for the antioxidant activity, using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical methods, and results demonstrated moderate antioxidant potential.