Nicel C. Estillore

Stimuli-responsive binary mixed polymer brushes and free-standing films by LbL-SIP.

We report a facile approach to preparing binary mixed polymer brushes and free-standing films by combining the layer-by-layer and surface-initiated polymerization (LbL-SIP) techniques. Specifically, the grafting of mixed polymer brushes of poly(n-isopropylacrylamide) and polystyrene (pNIPAM-pSt) onto LbL-macroinitiator-modified planar substrates is described. Atom transfer radical polymerization (ATRP) and free radical polymerization (FRP) techniques were employed for the syntheses of pNIPAM and pSt, respectively, yielding pNIPAM-pSt mixed polymer brushes. The composition of the two polymers was controlled by varying the number of macroinitiator layers deposited on the substrate (i.e., LbL layers = 4, 8, 12, 16, and 20); consequently, mixed brushes of different thicknesses and composition ratios were obtained. Moreover, the switching behavior of the LbL-mixed brush films as a function of solvent and temperature was demonstrated and evaluated by water contact angle and atomic force microscopy (AFM) experiments. It was found that both the solvent and temperature stimuli responses were a function of the mixed brush composition and thickness ratio where the dominant component played a larger role in the response behavior. Furthermore, the ability to obtain free-standing films was exploited. The LbL technique provided the macroinitiator density variation necessary for the preparation of stable free-standing mixed brush films. Specifically, the free-standing films exhibited the rigidity to withstand changes in the solvent and temperature environment and at the same time were flexible enough to respond accordingly to external stimuli.

Hydrodynamic Transformation of a Freestanding Polymer Nanosheet Induced by a Thermoresponsive Surface

Freestanding quasi-two-dimensional ultrathin films (e.g., 41 nm thick polymer nanosheets) were produced, on which stimuli-responsive 47 nm thick polymer brushes were constructed by atom transfer radical polymerization (ATRP) of poly(N-isopropylacrylamide). The resulting surfaces of the multilayered polysaccharide ultrathin films were evaluated by ellipsometry, IR imaging, in situ variable-temperature atomic force microscopy (AFM), and contact angle measurements. The morphological transformation of the freestanding polymer nanosheet bearing thermoresponsive polymer brushes was observed macroscopically through reversible structural color changes at the air-water interface. The dynamic shape change of the nanosheet was also monitored with the addition of a surfactant such as sodium n-dodecylsulfate to reduce the hydrophobicity of the surface. It was then demonstrated that the highly flexible freestanding polymer nanosheet is capable of acting as a unique platform for inducing stimuli-responsive behavior in nanomaterials.

Single Molecule Spectroscopy Reveals Heterogeneous Transport Mechanisms for Molecular Ions in a Polyelectrolyte Polymer Brush

Single molecule polarization and fluorescence correlation spectroscopy were used to evaluate heterogeneous transport mechanisms of molecular ions within supported polyelectrolyte brushes. Modes of diffusive transport include periods of significantly restricted rotational motion, often maintained over tens of milliseconds; periods of fast molecular rotation; and occasional adsorption of fluorescent probe molecules in the brush. The studies reveal rapid switching between orientational states during each observed mode of motion. Through quantitative analysis of state occupation times, the rate constants for transitions from weakly associated to strongly associated states were extracted. Additionally, the pH dependence of the ion transport rates in the brush exhibits an abrupt, rather than continuous, trend. These single molecule studies demonstrate the presence of dynamic anisotropic interactions between the charged molecular probe and the polymer brush and provide experimental evidence of stimuli responsive switchable transport functionality in the polyelectrolyte brush.

Intercalative Poly(carbazole) Precursor Electropolymerization within Hybrid Nanostructured Titanium Oxide Ultrathin Films

A protocol for nanostructuring and electropolymerization of a hybrid semiconductor polycarbazole-titanium oxide ultrathin film is described. Ultrathin (<100 nm) films based on polycarbazole precursor polyelectrolytes and titanium oxide (TiOx) have been fabricated by combining the layer-by-layer (LbL) and surface sol-gel layering techniques. Film growth was followed and confirmed through UV-vis spectroscopy, ellipsometry and quartz crystal microbalance with dissipation (QCM-D). Subsequent anodic electrochemical oxidation of the carbazole pendant units afforded a conjugated polymer network (CPN) film within intercalating TiOx layers of cross-linked and π-conjugated carbazole units. Cyclic voltammetry (CV), UV-vis, and fluorescence spectroscopy measurements confirmed this process. The LbL-driven polyelectrolyte deposition process resulted in a quantified electrochemical response, proportional to the number of layers, while the TiOx acted as a dielectric spacer limiting electron transfer kinetics and attenuating energy transfer in fluorescence. Electro-optical properties were compared with other polycarbazole thin film materials with respect to bandgap energy (Eg). The straightforward protocol in film nanostructuring and barrier/dielectric properties of the inorganic oxide slab (denoted here as, TiOx) should enable applications in organic light-emitting diodes (OLEDs), dielectric mirrors, planar waveguides, and photovoltaic devices for these hybrid ultrathin films.

Interfacial Behavior of OEG–Linear Dendron Monolayers: Aggregation, Nanostructuring, and Electropolymerizability

We report on the interesting interfacial behavior of oligoethylene glycol or OEGylated linear dendron monolayers at the air-water interface as a function of (a) carbazole dendron generation, (b) the length of the OEG units, and (c) the surface pressure applied upon compression. Surface pressure-area isotherms, hysteresis studies, and isobaric creep measurement revealed a structure-property relationship consistent with the hydrophilic-lipophilic balance of a linear dendron with the OEG group serving as the surface anchor to the water subphase. AFM studies revealed that all the OEGylated carbazole dendrons self-assemble into spherical morphology at low surface pressures but form ribbonlike structures as the surface pressure is increased. This nanostructuring is primarily imparted by the increase in van der Waals forces with increasing amount of carbazole units per dendron generation on a hydrophilic mica surface. Further, electrochemical cross-linking of the carbazole molecules by cyclic voltammetery (CV) on doped Si wafer has enabled the formation of an LB film monolayer with a secondary level of organization in the monolayer imparted by the inter- and intramolecular cross-linking among the carbazole units. This study should provide a basis for monolayer film materials based on combining the LB technique and electrochemical cross-linking for nanostructuring superstructures at the air-water interface.

Capsulation of carbon nanotubes on top of colloidally templated and electropolymerized polythiophene arrays

We describe the capsulation of colloidally templated polythiophene (P3-TAA) arrays with multi-walled carbon nanotubes (MWNTs) after colloidal template electropolymerization. The dissolution of the polystyrene (PS) particle templates, which were assembled via the Langmuir-Blodgett (LB)-like technique, allowed the formation of hollow-shell Janus type arrays.