Nicholas F. Quackenbush

Nature of the metal insulator transition in ultrathin epitaxial vanadium dioxide.

We have combined hard X-ray photoelectron spectroscopy with angular dependent O K-edge and V L-edge X-ray absorption spectroscopy to study the electronic structure of metallic and insulating end point phases in 4.1 nm thick (14 units cells along the c-axis of VO2) films on TiO2(001) substrates, each displaying an abrupt MIT centered at ~300 K with width <20 K and a resistance change of ΔR/R > 10(3). The dimensions, quality of the films, and stoichiometry were confirmed by a combination of scanning transmission electron microscopy with electron energy loss spectroscopy, X-ray spectroscopy, and resistivity measurements. The measured end point phases agree with their bulk counterparts. This clearly shows that, apart from the strain induced change in transition temperature, the underlying mechanism of the MIT for technologically relevant dimensions must be the same as the bulk for this orientation.

Direct Observation of Electrostatically Driven Band Gap Renormalization in a Degenerate Perovskite Transparent Conducting Oxide

We have directly measured the band gap renormalization associated with the Moss-Burstein shift in the perovskite transparent conducting oxide (TCO), La-doped BaSnO_{3}, using hard x-ray photoelectron spectroscopy. We determine that the band gap renormalization is almost entirely associated with the evolution of the conduction band. Our experimental results are supported by hybrid density functional theory supercell calculations. We determine that unlike conventional TCOs where interactions with the dopant orbitals are important, the band gap renormalization in La-BaSnO_{3} is driven purely by electrostatic interactions.

La-doped BaSnO3—Degenerate perovskite transparent conducting oxide: Evidence from synchrotron x-ray spectroscopy

We report direct evidence of conduction band filling in 3% La-doped BaSnO3 using hard x-ray photoelectron spectroscopy. Direct comparisons with hybrid density functional theory calculations support a 3.2 eV indirect band gap. The use of hybrid DFT is verified by excellent agreement between our photoelectron spectra and O K-edge x-ray emission and absorption spectra. Our experimental and computational results demonstrate that the conduction band is primarily of Sn 5s orbital character with little O 2p contribution, which is a prerequisite for designing a perovskite-based transparent conducting oxide.

Origin of deep subgap states in amorphous indium gallium zinc oxide:Chemically disordered coordination of oxygen

The origin of the deep subgap states in amorphous indium gallium zinc oxide (a-IGZO), whether intrinsic to the amorphous structure or not, has serious implications for the development of p-type transparent amorphous oxide semiconductors. We report that the deep subgap feature in a-IGZO originates from local variations in the oxygen coordination and not from oxygen vacancies. This is shown by the positive correlation between oxygen composition and subgap intensity as observed with X-ray photoelectron spectroscopy. We also demonstrate that the subgap feature is not intrinsic to the amorphous phase because the deep subgap feature can be removed by low-temperature annealing in a reducing environment. Atomistic calculations of a-IGZO reveal that the subgap state originates from certain oxygen environments associated with the disorder. Specifically, the subgap states originate from oxygen environments with a lower coordination number and/or a larger metal-oxygen separation.

Surface degradation of Li1–xNi0.80Co0.15Al0.05O2 cathodes: Correlating charge transfer impedance with surface phase transformations

The pronounced capacity fade in Ni-rich layered oxide lithium ion battery cathodes observed when cycling above 4.1 V (versus Li/Li+) is associated with a rise in impedance, which is thought to be due to either bulk structural fatigue or surface reactions with the electrolyte (or combination of both). Here, we examine the surface reactions at electrochemically stressed Li1–xNi0.8Co0.15Al0.05O2 binder-free powder electrodes with a combination of electrochemical impedance spectroscopy, spatially resolving electron microscopy, and spatially averaging X-ray spectroscopy techniques. We circumvent issues associated with cycling by holding our electrodes at high states of charge (4.1 V, 4.5 V, and 4.75 V) for extended periods and correlate charge-transfer impedance rises observed at high voltages with surface modifications retained in the discharged state (2.7 V). The surface modifications involve significant cation migration (and disorder) along with Ni and Co reduction, and can occur even in the absence of sign...

Understanding the stability of MnPO4

We have revealed the critical role of carbon coating in the stability and thermal behaviour of olivine MnPO4 obtained by chemical delithiation of LiMnPO4. (Li)MnPO4 samples with various particle sizes and carbon contents were studied. Carbon-free LiMnPO4 obtained by solid state synthesis in O2 becomes amorphous upon delithiation. Small amounts of carbon (0.3 wt%) help to stabilize the olivine structure, so that completely delithiated crystalline olivine MnPO4 can be obtained. Larger amount of carbon (2 wt%) prevents full delithiation. Heating in air, O2, or N2 results in structural disorder (<300 °C), formation of an intermediate sarcopside Mn3(PO4)2 phase (350–450 °C), and complete decomposition to Mn2P2O7 on extended heating at 400 °C. Carbon coating protects MnPO4 from reacting with environmental water, which is detrimental to its structural stability.

Electron lone pair distortion facilitated metal-insulator transition in β-Pb0.33V2O5 nanowires

The electronic structure of β-Pb0.33V2O5 nanowires has been studied with x-ray photoelectron spectroscopy techniques. The recent synthesis of defect-free β-Pb0.33V2O5 nanowires resulted in the discovery of an abrupt voltage-induced metal insulator transition. First principle calculations predicted an additional V-O-Pb hybridized “in-gap” state unique to this vanadium bronze playing a significant role in facilitating the transition. We confirm the existence, energetic position, and orbital character of the “in-gap” state. Moreover, we reveal that this state is a hybridized Pb 6s–O 2p antibonding lone pair state resulting from the asymmetric coordination of the Pb2+ ions.

What Happens to LiMnPO4 upon Chemical Delithiation

Olivine MnPO4 is the delithiated phase of the lithium-ion-battery cathode (positive electrode) material LiMnPO4, which is formed at the end of charge. This phase is metastable under ambient conditions and can only be produced by delithiation of LiMnPO4. We have revealed the manganese dissolution phenomenon during chemical delithiation of LiMnPO4, which causes amorphization of olivine MnPO4. The properties of crystalline MnPO4 obtained from carbon-coated LiMnPO4 and of the amorphous product resulting from delithiation of pure LiMnPO4 were studied and compared. The phosphorus-rich amorphous phases in the latter are considered to be MnHP2O7 and MnH2P2O7 from NMR, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy analysis. The thermal stability of MnPO4 is significantly higher under high vacuum than at ambient condition, which is shown to be related to surface water removal.

Correlating Lithium Hydroxyl Accumulation with Capacity Retention in V2O5 Aerogel Cathodes

V2O5 aerogels are capable of reversibly intercalating more than 5 Li(+)/V2O5 but suffer from lifetime issues due to their poor capacity retention upon cycling. We employed a range of material characterization and electrochemical techniques along with atomic pair distribution function, X-ray photoelectron spectroscopy, and density functional theory to determine the origin of the capacity fading in V2O5 aerogel cathodes. In addition to the expected vanadium redox due to intercalation, we observed LiOH species that formed upon discharge and were only partially removed after charging, resulting in an accumulation of electrochemically inactive LiOH over each cycle. Our results indicate that the tightly bound water that is necessary for maintaining the aerogel structure is also inherently responsible for the capacity fade.

Uniform second Li ion intercalation in solid state ϵ-LiVOPO4

Full, reversible intercalation of two Li+ has not yet been achieved in promising VOPO4 electrodes. A pronounced Li+ gradient has been reported in the low voltage window (i.e., second lithium reaction) that is thought to originate from disrupted kinetics in the high voltage regime (i.e., first lithium reaction). Here, we employ a combination of hard and soft x–ray photoelectron and absorption spectroscopy techniques to depth profile solid state synthesized LiVOPO4 cycled within the low voltage window only. Analysis of the vanadium environment revealed no evidence of a Li+ gradient, which combined with almost full theoretical capacity confirms that disrupted kinetics in the high voltage window are responsible for hindering full two lithium insertion. Furthermore, we argue that the uniform Li+ intercalation is a prerequisite for the formation of intermediate phases Li1.50VOPO4 and Li1.75VOPO4. The evolution from LiVOPO4 to Li2VOPO4 via the intermediate phases is confirmed by direct comparison between O K–edge absorption spectroscopy and density functional theory.