Nicholas Hopps

Overview of laser systems for the Orion facility at the AWE

The commissioning of the Orion laser facility at the Atomic Weapons Establishment (AWE) in the UK has recently been completed. The facility is a twelve beam Nd:glass-based system for studying high energy density physics. It consists of ten frequency-tripled beam-lines operating with nanosecond pulses, synchronized with two beam-lines with subpicosecond pulses, each capable of delivering 500 J to target. One of the short pulse beams has the option of frequency doubling, at reduced aperture, to yield up to 100 J at 527 nm in a subpicosecond pulse with high temporal contrast. An extensive array of target diagnostics is provided. This article describes the laser design and commissioning and presents key performance data of the facilitys laser systems.

Multipass reconfiguration of the HELEN Nd:glass laser at the Atomic Weapons Establishment

The HELEN high-power Nd:glass laser has been rebuilt in a new multipass configuration that requires fewer components to maintain existing performance. This is expected to lead to greater system availability and reduced running costs. We describe the new design, discuss some of the key issues that had to be addressed, and present operational results.

Comprehensive description of the Orion laser facility

The Orion laser facility at the atomic weapons establishment (AWE) in the UK has been operational since April 2013, fielding experiments that require both its long and short pulse capability. This paper provides a full description of the facility in terms of laser performance, target systems and diagnostics currently available. Inevitably, this is a snapshot of current capability—the available diagnostics and the laser capability are evolving continuously. The laser systems consist of ten beams, optimised around 1 ns pulse duration, which each provide a nominal 500 J at a wavelength of 351 nm. There are also two short pulse beams, which each provide 500 J in 0.5 ps at 1054 nm. There are options for frequency doubling one short pulse beam to enhance the pulse temporal contrast. More recently, further contrast enhancement, based on optical parametric amplification (OPA) in the front end with a pump pulse duration of a few ps, has been installed. An extensive suite of diagnostics are available for users, probing the optical emission, x-rays and particles produced in laser-target interactions. Optical probe diagnostics are also available. A description of the diagnostics is provided.

Ultrahigh contrast from a frequency-doubled chirped-pulse-amplification beamline

This paper describes frequency-doubled operation of a high-energy chirped-pulse-amplification beamline. Efficient type-I second-harmonic generation was achieved using a 3 mm thick 320 mm aperture KDP crystal. Shots were fired at a range of energies achieving more than 100 J in a subpicosecond, 527 nm laser pulse with a power contrast of 10(14).

Contrast enhancements to petawatt lasers using short pulse optical parametric amplifiers and frequency doubling

This paper describes the integration of a short pulse optical parametric amplifier into the chirped pulse amplification beam lines of the Orion laser facility. This enables Orion to generate petawatt laser pulses at 1054 nm with a nanosecond contrast of >10(10). By combining this with frequency-doubling post compression, we can generate 100 J, 500 fs laser pulses with a nanosecond contrast calculated to be ∼10(18).

Pulse generation and preamplification for long pulse beamlines of Orion laser facility

We describe the pulse generation, shaping, and preamplification system for the nanosecond beamlines of the Orion laser facility. The system generates shaped laser pulses of up to approximately 1 J of 100 ps-5 ns duration with a programmable temporal profile. The laser has a 30th-power supergaussian spatial profile and is diffraction limited. The system is capable of imposing 2D smoothing by spectral dispersion upon the beam, which will produce a nonuniformity of 10% rms at the target.

Overview of Project Orion

Project Orion will provide a facility for performing high energy density plasma physics experiments at AWE. The laser consists of ten, nanosecond beam lines delivering a total of 5kJ with 0.1-5ns temporally shaped pulses and two short pulse beam lines, each producing 500J in 0.5ps with intensity > 10^21 W/cm^2. The performance of the Orion laser is reported as the first phase of commissioning (one short and one long pulse beam) concludes. Target shots with all beam lines will begin in 2012.

Improving the intensity of the HELEN Laser at AWE

The HELEN laser is a three-beam, large aperture Nd:glass laser, used for plasma physics studies at the Atomic Weapons Establishment in the UK. Two of the beams nominally deliver 500 J each in 1 ns at the second harmonic (527 nm). The third beam, the “backlighter”, has recently been upgraded to operate as a chirped pulse amplification system and it now routinely delivers 70 J to target in 500 fs. Optimal focal spot performance is achieved using a closed-loop adaptive optics system, which ensures good wavefront characteristics, irrespective of whether previous firing of the amplifiers has induced refractive index variations in the laser glass. The system uses a 32 element bimorph mirror with 98 mm aperture, roughly half way through the laser chain. A Shack-Hartman wavefront sensor, positioned at the output of the laser is the diagnostic used to provide feedback to the deformable mirror. Correction of the static and slowly varying aberrations on the beam has been demonstrated. The fast aberrations induced during the flashlamp discharge have been evaluated. The improved focal spot characteristics result in an intensity on target of significantly greater than 1019 Wcm-2.

Design and Installation of a static wavefront correction optic on the HELEN laser

This report discusses the design and installation of a static wavefront correction optic on the HELEN laser at AWE. The element is designed to compensate for static phase errors and prompt thermally induced aberrations on the backlighter beam of the laser. Partial compensation of cooling effects is also included in the design. A phase element has been fabricated using a recently developed novel wet etch figuring tool at LLNL. Performance evaluation through comparison of the focal spot pre- and post-installation is provided. The element has been tested on the laser to produce a 2x reduction in focal spot size.

Development of static phase control elements for high power solid state lasers

We describe development of passive phase correction elements to compensate for static phase errors and prompt thermally induced aberrations in the HELEN laser at AWE. Partial compensation of cooling effects is also included in the design. Phase elements have been fabricated through two processes, an indirect write lithographic process using amplitude masks generated from measured laser wavefronts and a direct write method using a novel wet etch figuring tool.