Nicole Riddell

Disposition of perfluorinated acid isomers in sprague‐dawley rats; Part 1: Single dose

Perfluorinated acids (PFAs) and their precursors (PFA-precursors) exist in the environment as linear and multiple branched isomers. These isomers are hypothesized to have different biological properties, but no isomer-specific data are currently available. The present study is the first in a two-part project examining PFA isomer-specific uptake, tissue distribution, and elimination in a rodent model. Seven male Sprague-Dawley rats were administered a single gavage dose of approximately 500 microg/kg body weight perfluorooctane sulfonate (C(8)F(17)SO(3)(-), PFOS), perfluorooctanoic acid (C(7)F(15)CO(2)H, PFOA), and perfluorononanoic acid (C(8)F(17)CO(2)H, PFNA) and 30 microg/kg body weight perfluorohexane sulfonate (C(6)F(13)SO(3)(-), PFHxS). Over the subsequent 38 d, urine, feces, and tail-vein blood samples were collected intermittently, while larger blood volumes and tissues were collected on days 3 and 38 for isomer analysis by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). For all PFAs, branched isomers generally had lower blood depuration half-lives than the corresponding linear isomer. The most remarkable exception was for the PFOS isomer containing an alpha-perfluoromethyl branch (1m-PFOS), which was threefold more persistent than linear PFOS, possibly due to steric shielding of the hydrophilic sulfonate moiety. For perfluoromonomethyl-branched isomers of PFOS, a structure-property relationship was observed whereby branching toward the sulfonate end of the perfluoroalkyl chain resulted in increased half-lives. For PFHxS, PFOA, and PFOS, preferential elimination of branched isomers occurred primarily via urine, whereas for PFNA preferential elimination of the isopropyl isomer occurred via both urine and feces. Changes in the blood isomer profiles over time and their inverse correlation to isomer elimination patterns in urine, feces, or both provided unequivocal evidence of significant isomer-specific biological handling. Source assignment based on PFA isomer profiles in biota must therefore be conducted with caution, because isomer profiles are unlikely to be conserved in biological samples.

Disposition of perfluorinated acid isomers in Sprague-Dawley rats; part 2: subchronic dose.

Two major industrial synthetic pathways have been used to produce perfluorinated acids (PFAs) or their precursors: Telomerization and electrochemical fluorination (ECF). Products of telomer and ECF origin can be distinguished by structural isomer profiles. A mixture of linear and branched perfluoroalkyl isomers is associated with ECF. Telomer products characteristically consist of a single perfluoroalkyl geometry, typically linear. In biota, it is unclear if the isomer profile is conserved relative to the exposure medium and hence whether PFA isomer profiles in organisms are useful for distinguishing environmental PFA sources. A companion study suggested isomer-specific disposition following a single oral gavage exposure to rats. To confirm these findings under a more realistic subchronic feeding scenario, male and female rats were administered PFA isomers by diet for 12 weeks, followed by a 12-week depuration period. The diet contained 500 ng/g each of ECF perfluorooctanoate (PFOA, approximately 80% n-PFOA), ECF perfluorooctane sulfonate (PFOS, approximately 70% n-PFOS), and linear and isopropyl perfluorononanoate (n- and iso-PFNA). Blood sampling during the exposure phase revealed preferential accumulation of n-PFOA and n-PFNA compared to most branched isomers. Female rats depurated all isomers faster than males. Both sexes eliminated most branched perfluorocarboxylate isomers more rapidly than the n-isomer. Elimination rates of the major branched PFOS isomers were not statistically different from n-PFOS. Two minor isomers of ECF PFOA and one branched PFOS isomer had longer elimination half-lives than the n-isomers. Although extrapolation of these pharmacokinetics trends in rats to humans and wildlife requires careful consideration of dosage level and species-specific physiology, cumulative evidence suggests that perfluorocarboxylate isomer profiles in biota may not be suitable for quantifying the relative contributions of telomer and ECF sources.

Liquid chromatography-atmospheric pressure photoionization tandem mass spectrometry for analysis of 36 halogenated flame retardants in fish.

A comprehensive, sensitive and high-throughput liquid chromatography-atmospheric pressure photoionization tandem mass spectrometry (LC-APPI-MS/MS) method has been developed for analysis of 36 halogenated flame retardants (HFRs). Under the optimized LC conditions, all of the HFRs eluted from the LC column within 14min, while maintaining good chromatographic separation for the isomers. Introduction of the pre-heated dopant to the APPI source decreased the background noise fivefold, which enhanced sensitivity. An empirical equation was proposed to describe the relation between the ion intensity and dopant flow. The excellent on-column instrument detection limits averaged 4.7pg, which was similar to the sensitivity offered by gas chromatography-high-resolution mass spectrometry (GC-HRMS). This method was used to analyze a series of fish samples. Good agreement was found between the results for PBDEs from LC-APPI-MS/MS and GC-HRMS.

Structure characterization and thermal stabilities of the isomers of the brominated flame retardant 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane

1,2-Dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH) is used primarily as an additive flame retardant. 1H NMR spectroscopy and an X-ray structure determination have revealed that a technical mixture consists largely of two (of the four possible) diastereomers, rac-(1R,2R)-1,2-dibromo-(4S)-4-((1S)-1,2-dibromoethyl)cyclohexane (alpha-TBECH) and rac-(1R,2R)-1,2-dibromo-(4S)-4-((1R)-1,2-dibromoethyl)cyclohexane (beta-TBECH), in a mole ratio of approximately 1:1. The two other possible isomers, gamma- and delta-TBECH, were not detected in a technical mixture. The TBECH isomers are thermally sensitive and can easily interconvert at temperatures of 125 degrees C. A thermal equilibrium mixture of alpha-, beta-, gamma- and delta-TBECH consists of approximately 33%, 33%, 17% and 17% of these isomers, respectively. Separation of all four TBECH diastereomers, with minimal thermal interconversion of the isomers, was achieved by careful selection of GC-capillary column length and injector temperature. Although technical TBECH does not contain the gamma- and delta-isomers, they may still be relevant environmental contaminants since manufacturing processes utilize thermal processes which may induce their formation.

Structural characterization and thermal stabilities of the isomers of the brominated flame retardant 1,2,5,6-tetrabromocyclooctane (TBCO).

1,2,5,6-Tetrabromocyclooctane (TBCO) is a commercial brominated flame retardant that is employed mainly as an additive in textiles, paints and plastics. Very little is known about its presence or behavior in the environment or its analysis. TBCO can exist as two diastereomers, the stereochemistries of which have not been previously reported. We have named the first eluting isomer, under HPLC conditions, as alpha-TBCO (alpha-TBCO) and the later eluting isomer as beta-TBCO (beta-TBCO) when using an Acquity UPLC BEH C(18) column with methanol/acetonitrile/water as the mobile phase. The structural elucidation of these two isomers was accomplished by 1H NMR spectroscopy, GC/MS, LC/MS and X-ray structure determinations. alpha-TBCO is (1R,2R,5S,6S)-1,2,5,6-tetrabromocyclooctane and beta-TBCO is rac-(1R,2R,5R,6R)-1,2,5,6-tetrabromocyclooctane. As with some other brominated cycloaliphatic compounds, TBCO is thermally labile and the isomers easily interconvert. A thermal equilibrium mixture of alpha- and beta-TBCO consists of approximately 15% and 85% of these isomers, respectively. Separation of the two diastereomers, with minimal thermal interconversion between them, is achievable by careful selection of GC-capillary column length and injector temperature. LC/MS analyses of TBCO also presents an analytical challenge due to poor resolution of the isomers on chromatographic stationary phases, and weak intensity of molecular ions (or major fragment ions) when using LC-ESI/MS. Only bromide ions were seen in the mass spectra. APCI and APPI also failed to produce the molecular ion with sufficient intensity for identification.

Characterization and Biological Potency of Mono- to Tetra-Halogenated Carbazoles

This paper deals with the characterization and aryl hydrocarbon receptor (AhR) agonist activities of a series of chlorinated, brominated, and mixed bromo/chlorocarbazoles, some of which have been identified in various environmental samples. Attention is directed here to the possibility that halogenated carbazoles may currently be emitted into the environment as a result of the production of carbazole-containing polymers present in a wide variety of electronic devices. We have found that any carbazole that is not substituted in the 1,3,6,8 positions may be lost during cleanup of environmental extracts if a multilayer column is utilized, as is common practice for polychlorinated dibenzo-p-dioxin (dioxin) and related compounds. In the present study, (1)H NMR spectral shift data for 11 relevant halogenated carbazoles are reported, along with their gas chromatographic separation and analysis by mass spectrometry. These characterization data allow for confident structural assignments and the derivation of possible correlations between structure and toxicity based on the halogenation patterns of the isomers investigated. Some halogenated carbazoles exhibit characteristics of persistent organic pollutants and their potential dioxin-like activity was further investigated. The structure-dependent induction of CYP1A1 and CYP1B1 gene expression in Ah-responsive MDA-MB-468 breast cancer cells by these carbazoles was similar to that observed for other dioxin-like compounds, and the magnitude of the fold induction responses for the most active halogenated carbazoles was similar to that observed for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). 2,3,6,7-Tetrachlorocarbazole was one of the most active halogenated carbazoles and, like TCDD, contains 4 lateral substituents; however, the estimated relative effect potency for this compound (compared to TCDD) was 0.0001 and 0.0032, based on induction of CYP1A1 and CYP1B1 mRNA, respectively.

Perfluorooctane sulfonate (PFOS) precursors can be metabolized enantioselectively: principle for a new PFOS source tracking tool.

Perfluorooctane sulfonate (PFOS) is the most prominent perfluoroalkyl substance found in the serum of humans and wildlife, yet the major routes by which exposure occurs are not clear. An important issue facing both the scientific and chemical regulatory communities is the extent to which PFOS concentrations in biota are attributable to direct exposure versus metabolism of PFOS-precursors (higher molecular weight derivatives that can be biotransformed to PFOS). Given that certain branched PFOS-precursors are chiral, we hypothesized that nonracemic proportions of PFOS isomers in biological samples could be used as a marker of significant exposure to PFOS-precursors. In this proof-of-principle study we examined the enantiomer-specific biotransformation of a high-purity model PFOS-precursor isomer: C(6)F(13)C*F(CF(3))SO(2)N(H)CH(2)(C(6)H(4))OCH(3) (named 1m-PreFOS hereafter, and whereby * indicates the chiral carbon center). A method for the enantiospecific separation of a compound with a long perfluoroalkyl chain and a chiral center was developed and applied to evaluate the enantioselectivity of 1m-PreFOS biotransformation in human liver microsomes. Gradient elution in reversed-phase mode on a Chiralpak IC column permitted the near-baseline separation of the two enantiomers (E1 and E2, nomenclature based on retention order) in 65 min. Microsome incubations demonstrated that E1 and E2 were metabolized at significantly different rates; k(E1) = 6.5(+/-0.3) x 10(-2) min(-1) (half-life = 10.6 min) and k(E2) = 5.2(+/-0.3) x 10(-2) min(-1) (half-life = 13.3 min), respectively. These results suggest that tracking of PFOS exposure sources by enantiomeric fractionation is feasible, and that new analytical methods for the enantioselective analysis of PFOS isomers in human and environmental samples should be developed.

The three-dimensional structural characterization of hexachlorocyclopentenyl-dibromocyclooctane (HCDBCO)

The 1H NMR spectrum and the crystal structure of HCDBCO [(1R,2R,5R,6R,9S,10S)-5,6-dibromo-1,10,11,12,13,13-hexachlorotricyclo[8,2,1,0(2,9)]-tridec-11-ene)] are reported. The measured dihedral angles from the X-ray structure correlate very well with those calculated from the proton-proton coupling constants indicating that the conformations in solution and in the solid state are probably very similar. Attempts at calculating the 3D model structure of HCDBCO only produced a very poor match between the measured dihedral angles between vicinal protons and the observed proton-proton coupling constants from the 1H NMR spectrum. GC/MS analysis with an injector temperature of 250 degrees C produced minor amounts of debrominated HCDBCO. Reducing the temperature to 200 degrees C eliminated this problem.

Preparation and X-ray structural characterization of further stereoisomers of 1,2,5,6,9,10-hexabromocyclododecane.

Technical 1,2,5,6,9,10-hexabromocyclododecane (HBCD) consists largely of three diastereomers (α-, β-, and γ-HBCD) produced by the trans addition of bromine to cis,trans,trans-cyclododeca-1,5,9-triene (CDT). However, another seven diastereomers are theoretically possible and may be produced by trans addition of bromine across the double bonds of the other three isomers of 1,5,9-CDT. There are indications that small amounts of the minor HBCD isomers may be present in commercial HBCD mixtures or in products containing this brominated flame retardant (BFR). Such minor components may indeed derive from traces of other 1,5,9-CDTs in the cis, trans, trans starting material, however their formation may also be possible through isomerizations during the processing of this BFR or by bioisomerization subsequent to its release into the environment. Two of the seven additional diastereomers (δ- and ε-HBCD) were synthesized previously from trans,trans,trans-CDT. We now report the preparation of the remaining five diastereomers, ζ-, η-, and θ-HBCD from cis,cis,trans-CDT and ι- and κ-HBCD from cis,cis,cis-CDT, and their characterization by (1)H NMR spectroscopy and X-ray crystallography. The availability of these further diastereomers of HBCDshould aid in determining if the minor isomers are present in commercial samples of this BFR, in products containing HBCDs, or in environmental samples. We have also carried out an X-ray crystal structure determination on ε-HBCD, so that crystal structures are now available for all 10 HBCD diastereomers.

Examination of technical mixtures of halogen-free phosphorus based flame retardants using multiple analytical techniques

The application of phosphorus based flame retardants as replacements for commonly used halogenated flame retardants has been gaining interest due to the possibility that these compounds may have a less significant impact on human and environmental health. Unfortunately, little is known about the chemical compositions of many of the technical products (which often are mixtures) and a single separation technique for concurrent analysis of these types of compounds has not been identified. This paper reports the results of an investigation into the constituents of three halogen free organophosphate flame retardants (OPFRs), resorcinol bis(diphenyl phosphate) (RDBPP), bisphenol A bis(diphenyl phosphate) (BPA-BDPP), and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The major components of commercial samples of RDBPP and BPA-BDPP were isolated by preparative TLC and characterized by NMR. A commercial sample of DOPO was found to be essentially pure, but its analysis is complicated by the fact that it can exist in ring-open and ring-closed forms. With the structures of the components confirmed by NMR, multiple analytical separation techniques (gas chromatography (GC), liquid chromatography (LC), and packed column supercritical fluid chromatography (pSFC)) were investigated for the analysis of these three technical products. Packed column supercritical fluid chromatography allows the separation of the components of all three OPFRs, including the two forms of DOPO, in a single run.