Nicoletta Chieffi

Retention of fiber posts cemented at different time intervals in canals obturated using an epoxy resin sealer.

OBJECTIVES To evaluate the effect of immediate versus delayed post space preparation and cementation on the retention of different types of fiber posts in canals obturated with an epoxy resin sealer. METHODS Sixty-eight single-rooted human teeth were decoronated and the root canals were shaped with rotary instruments and obturated with gutta-percha and an epoxy resin sealer. The teeth were divided into four experimental groups according to the different times of post space preparation and cementation: immediate (group 1), 24h (group 2) and 1 week (group 3) after root canal filling. Control group (group 4) with no root canal obturation was included. Two teeth were randomly selected from each group for SEM examination. Each group was further divided into three subgroups of five teeth each (n=5), according to the type of post and the materials used for luting the posts. A push-out test was performed and differences among experimental groups were analyzed with two-way ANOVA and Tukey test (alpha=0.05). RESULTS Interfacial strength values achieved in group 1, where an immediate cementation was performed, were significantly lower (p<0.05) than those in group 2 and group 3 in which post cementation was performed 24h or 1 week after the root canal filling. Post type affected post retention, FRC Postec and DT Light Post posts achieved higher interfacial strengths than ENA Post (p<0.05). SEM examination revealed a more conspicuous presence of sealer remnants on the walls of immediately prepared post spaces. CONCLUSIONS Delayed cementation of fiber post resulted in higher retentive strengths irrespective of the post type.

Influence of Different Pulse Durations of Er:YAG Laser Based on Variable Square Pulse Technology on Microtensile Bond Strength of a Self-Etch Adhesive to Dentin

OBJECTIVE The aim of the study was to evaluate the microtensile bond strength of a composite resin to dentin modified with three different pulse durations of the Er:YAG laser based on variable square pulse technology and with one self-etch adhesive. MATERIALS AND METHODS The entire occlusal enamel was removed to obtain flat dentin surface for 48 human molar teeth. The teeth were randomly divided into four experimental groups (n=12 per group), according to the pretreatment of dentin: (1) control group; (2) super short pulse (SSP) (50 μsec); (3) medium short pulse (MSP) (100 μsec); and (4) short pulse (SP) (300 μsec) with Er:YAG laser. The energy of the laser used was 80 mJ with average power of 0.8 W. The microtensile bond strength was tested with a universal testing machine. Two specimens from each experimental group were subjected to scanning electron microscopic (SEM) examination, to observe the irradiated surface. RESULTS Dentin surface treated with SSP showed significantly lower microtensile bond strength values (24±9.8 MPa) in comparison with the control group and SP group (35.3±12.8 and 32.9±10.7 MPa, respectively), (p<0.05). The MSP and SP groups did not show any statistically significant difference in microtensile bond strength in comparsion with the control group (p>0.05). CONCLUSIONS The use of SP and MSP of the Er:YAG laser with one step self-etch adhesive does not impair or improve the microtensile bond strength in dentin, whereas SSP may not be suitable for dentin surface treatment prior to bonding procedures.

Ablative Potential of Four Different Pulses of Er:YAG Lasers and Low-Speed Hand Piece

OBJECTIVE The aim of the study was to evaluate the ablation rate of caries in dentin with fluorescence-feedback controlled Er:YAG, Variable Square Pulse technology (VSPt) based Er:YAG working in different pulse durations, and steel bur. MATERIALS AND METHODS Sixty human molar teeth with caries in dentin, extracted for periodontal reasons, were selected for this study. All selected teeth were randomly divided into five groups, each containing twelve specimens: (1) group FFC, fluorescence feedback-controlled Er:YAG laser; (2) group SSP (super short pulse: 50 μs); (3) group MSP (medium short pulse; 100 μs); (4) group SP (short pulse; 300 μs); and (5) group SB, steel bur in a slow-speed hand piece. A profilometer was used to determine the volume of the ablated caries in dentin. The clinical and real ablation rates of caries in dentin were calculated. Two specimens from each experimental group were selected randomly and subjected to SEM examination. RESULTS The volumes of the ablated caries in dentin in the SSP and SB groups were statistically significantly different in comparison with other experimental groups (p<0.05). The clinical and real ablation rate of caries in dentin was the highest for the SSP group (0.15±0.05 and 0.17±0.05 mm(3)/sec, respectively) and statistically significantly different in comparison with the MSP and SB groups (p<0.05). The SB and FFC groups revealed a dentin surface with a smear layer and closed dentinal tubules on SEM micrographs. In the SSP, MSP, and SP groups, an irregular surface without a smear layer was found. CONCLUSIONS Taking into consideration the experimental conditions of the present study, SSP was the most efficient in ablation of caries in dentin, providing a smear layer-free surface with open dentinal tubules.

Shear Bond Strength to Enamel and Flexural Strength of Different Fiber-reinforced Composites

PURPOSE To assess the shear bond strength to unground human enamel (ESBS) and flexural strength (FS) of different reinforcing fibers used in combination with a flowable composite resin. MATERIALS AND METHODS For ESBS testing, 90 human molars were selected and randomly divided into 9 groups (n = 10) according to the reinforcing fiber to be tested: 1. RTD Quartz Splint additionally impregnated at chairside with Quartz Splint Resin (RTD); 2. RTD Quartz Splint without additional impregnation; 3. Ribbond-THM (Ribbond) impregnated with OptiBond FL Adhesive; 4: Ribbond Triaxial (Ribbond) impregnated with OptiBond FL Adhesive; 5. Connect (Kerr) impregnated with OptiBond FL Adhesive; 6. Construct (Kerr) impregnated with Opti- Bond FL Adhesive; 7. everStick PERIO (Stick Tech); 8. everStick C&B (Stick Tech); 9. nonreinforced composite Premise flowable (Kerr). Cylinders of flowable composite reinforced with the fibers were bonded to the intact buccal surface of the teeth. After 24 h of storage, shear loading was performed until failure occurred. FS was assessed performing three-point bending test according to ISO Standard 4049/2000. ESBS and FS data were analyzed using one-way ANOVA, followed by Tukeys HSD test for post-hoc comparisons (p < 0.05). RESULTS For each group, the ESBS and FS, respectively, in MPa were: 1. 17.07 ± 4.52 and 472.69 ± 30.49; 2. 14.98 ± 3.92 and 441.77 ± 61.43; 3. 18.59 ± 5.67 and 186.89 ± 43.89; 4. 16.74 ± 6.27 and 314.41 ± 148.52; 5. 14.38 ± 4.14 and 223.80 ± 77.35; 6. 16.00 ± 5.55 and 287.62 ± 85.91; 7. 16.42 ± 3.67 and 285.35 ± 39.68; 8. 23.24 ± 5.81 and 370.46 ± 29.26; 9. 12.58 ± 4.76 and 87.75 ± 22.87. For most fibers, no significant difference in ESBS was found compared to the control group, except for everStick C&B, which yielded higher ESBS. Nonreinforced composite exhibited the lowest FS, while all fibers positively affected the FS. CONCLUSIONS Fiber reinforcement of flowable composite does not affect its ESBS. The flexural strength of FRCs is significantly influenced by fiber composition and pattern.

Cement thickness at implant-supported single-tooth Lava assemblies: a scanning electron microscopic investigation.

OBJECTIVES The fit of implant-supported single-tooth Lava zirconia assemblies was investigated in this study. The implant-abutment interface, the interface between the metallic and the zirconia portion of the abutment and the interface between Lava abutments and copings were evaluated. The adaptation of titanium abutments to implants and Lava copings was investigated as a control. MATERIAL AND METHODS Twenty implants were randomly assigned and connected to Lava abutments (group 1) or titanium abutments (group 2). All specimens were subjected to scanning electron microscopy (SEM) analysis of the fixture/abutment fit. Afterwards, specimens were luted to Lava copings and subjected to a SEM evaluation of the marginal external adaptation of the abutments with the copings. Finally, the samples were embedded in resin, sectioned and subjected to SEM analysis of the following interfaces; group 1: titanium/zirconia interface (between the constitutive components of the Lava abutment) and the zirconia/zirconia interface (between the Lava abutment and the coping); group 2: the titanium/zirconia interface (between the titanium abutment and the Lava coping). Non-parametric analysis of variance and a post hoc test were used for statistical analysis. RESULTS Significant differences emerged in the cement thickness between titanium and zirconia components of the Lava abutments as compared with the thickness measured at the interface between Lava copings and the abutments investigated. No differences were found in cement thickness between Lava copings and the two different abutments. CONCLUSIONS When Lava abutments are used, the most critical cement thickness is the internal interface between its titanium and zirconia components. Lava coping adaptation for both Lava and titanium abutments is within the clinical acceptable range.

Effect of photon induced photoacoustic streaming (PIPS) on bond strength to dentine of two root canal filling materials.

The aim of this study was to evaluate the effect of photon induced photoacoustic streaming (PIPS) technique in combination with EDTA on bond strength of gutta‐percha/AH Plus and Resilon/RealSeal SE root canal fillings to root dentine.