Nilesh R. Chodankar

Low-cost flexible supercapacitors with high-energy density based on nanostructured MnO2 and Fe2O3 thin films directly fabricated onto stainless steel.

The facile and economical electrochemical and successive ionic layer adsorption and reaction (SILAR) methods have been employed in order to prepare manganese oxide (MnO2) and iron oxide (Fe2O3) thin films, respectively with the fine optimized nanostructures on highly flexible stainless steel sheet. The symmetric and asymmetric flexible-solid-state supercapacitors (FSS-SCs) of nanostructured (nanosheets for MnO2 and nanoparticles for Fe2O3) electrodes with Na2SO4/Carboxymethyl cellulose (CMC) gel as a separator and electrolyte were assembled. MnO2 as positive and negative electrodes were used to fabricate symmetric SC, while the asymmetric SC was assembled by employing MnO2 as positive and Fe2O3 as negative electrode. Furthermore, the electrochemical features of symmetric and asymmetric SCs are systematically investigated. The results verify that the fabricated symmetric and asymmetric FSS-SCs present excellent reversibility (within the voltage window of 0–1 V and 0–2 V, respectively) and good cycling stability (83 and 91%, respectively for 3000 of CV cycles). Additionally, the asymmetric SC shows maximum specific capacitance of 92 Fg−1, about 2-fold of higher energy density (41.8 Wh kg−1) than symmetric SC and excellent mechanical flexibility. Furthermore, the “real-life” demonstration of fabricated SCs to the panel of SUK confirms that asymmetric SC has 2-fold higher energy density compare to symmetric SC.

Alcohol mediated growth of α-MnO2 thin films from KMnO4 precursor for high performance supercapacitors

Energy storage devices, with low cost, high energy density, high power density, and long cycle life, have prime importance in order to solve the problem of interrupted power supply of renewable generation systems. In the present work, MnO2 thin films have been deposited by a simple, scalable, additive-free, binder-less, low cost, low temperature and eco-friendly chemical bath deposition method. The impact of three different alcohols (methanol, ethanol, 2-propenol) as reducing agents on the morphological, structural and electrochemical properties of MnO2 thin film is investigated. The MnO2 thin film prepared with the methanol as the reducing agent exhibits high specific surface area with excellent electrochemical features such as high specific capacitance of 633 F g−1 and high energy density of 65.9 W h kg−1 at current density of 1 mA cm−2 along with a good cycling stability of 95% after 2000 CV cycles. Such leading electrochemical properties suggest that MnO2 thin film prepared with methanol as the reducing agent using chemical bath deposition is a significant method to prepare reliable electrode material for future energy storage devices.

Ultrathin mesoporous RuCo2O4 nanoflakes: A novel advanced electrode for high performance asymmetric supercapacitors

A new ruthenium cobalt oxide (RuCo2 O4 ) with a unique marigold-like nanostructure and excellent performance as an advanced electrode material has been successfully prepared by a simple electrodeposition (potentiodynamic mode) method. The RuCo2 O4 marigolds consist of numerous clusters of ultrathin mesoporous nanoflakes, leaving a large interspace between them to provide numerous electrochemically active sites. Strikingly, this unique marigold-like nanostructure provided excellent electrochemical performance in terms of high energy-storage capacitance (1469 F g-1 at 6 A g-1 ) with excellent rate proficiency and long-lasting operating cycling stability (ca. 91.3 % capacitance retention after 3000 cycles), confirming that the mesoporous nanoflakes participate in the ultrafast electrochemical reactions. Furthermore, an asymmetric supercapacitor was assembled using RuCo2 O4 (positive electrode) and activated carbon (negative electrode) with aqueous KOH electrolyte. The asymmetric design allowed an upgraded potential range of 1.4 V, which further provided a good energy density of 32.6 Wh kg-1 (1.1 mWh cm-3 ). More importantly, the cell delivered an energy density of 12.4 Wh kg-1 even at a maximum power density of 3.2 kW kg-1 , which is noticeably superior to carbon-based symmetric systems.

Ionically conducting PVA-LiClO4 gel electrolyte for high performance flexible solid state supercapacitors.

The synthesis of polymer gel electrolyte having high ionic conductivity, excellent compatibility with active electrode material, mechanical tractability and long life is crucial to obtain majestic electrochemical performance for flexible solid state supercapacitors (FSS-SCs). Our present work describes effect of different polymers gel electrolytes on electrochemical properties of MnO2 based FSS-SCs device. It is revealed that, MnO2-FSS-SCs with polyvinyl alcohol (PVA)-Lithium perchlorate (LiClO4) gel electrolyte demonstrate excellent electrochemical features such as maximum operating potential window (1.2V), specific capacitance of 112Fg(-1) and energy density of 15Whkg(-1) with extended cycling stability up to 2500CV cycles. Moreover, the calendar life suggests negligible decrease in the electrochemical performance of MnO2-FSS-SCs after 20days.

Enhanced electrochemical performance of monoclinic WO3 thin film with redox additive aqueous electrolyte

To achieve the highest electrochemical performance for supercapacitor, it is very essential to find out a suitable pair of an active electrode material and an electrolyte. In the present work, a simple approach is employed to enhance the supercapacitor performance of WO3 thin film. The WO3 thin film is prepared by a simple and cost effective chemical bath deposition method and its electrochemical performance is tested in conventional (H2SO4) and redox additive [H2SO4+hydroquinone (HQ)] electrolytes. Two-fold increment in electrochemical performance for WO3 thin film is observed in redox additive aqueous electrolyte compared to conventional electrolyte. WO3 thin film showed maximum specific capacitance of 725Fg(-1), energy density of 25.18Whkg(-1) at current density of 7mAcm(-2) with better cycling stability in redox electrolyte. This strategy provides the versatile way for designing the high performance energy storage devices.

An innovative concept of use of redox-active electrolyte in asymmetric capacitor based on MWCNTs/MnO2 and Fe2O3 thin films

In present investigation, we have prepared a nanocomposites of highly porous MnO2 spongy balls and multi-walled carbon nanotubes (MWCNTs) in thin film form and tested in novel redox-active electrolyte (K3[Fe(CN)6] doped aqueous Na2SO4) for supercapacitor application. Briefly, MWCNTs were deposited on stainless steel substrate by “dip and dry” method followed by electrodeposition of MnO2 spongy balls. Further, the supercapacitive properties of these hybrid thin films were evaluated in hybrid electrolyte ((K3[Fe(CN)6 doped aqueous Na2SO4). Thus, this is the first proof-of-design where redox-active electrolyte is applied to MWCNTs/MnO2 hybrid thin films. Impressively, the MWCNTs/MnO2 hybrid film showed a significant improvement in electrochemical performance with maximum specific capacitance of 1012 Fg−1 at 2 mA cm−2 current density in redox-active electrolyte, which is 1.5-fold higher than that of conventional electrolyte (Na2SO4). Further, asymmetric capacitor based on MWCNTs/MnO2 hybrid film as positive and Fe2O3 thin film as negative electrode was fabricated and tested in redox-active electrolytes. Strikingly, MWCNTs/MnO2//Fe2O3 asymmetric cell showed an excellent supercapacitive performance with maximum specific capacitance of 226 Fg−1 and specific energy of 54.39 Wh kg−1 at specific power of 667 Wkg−1. Strikingly, actual practical demonstration shows lightning of 567 red LEDs suggesting “ready-to sell” product for industries.

Chemically prepared La2Se3 nanocubes thin film for supercapacitor application

Lanthanum selenide (La2Se3) nanocubes thin film is prepared via successive ionic layer adsorption and reaction (SILAR) method and utilized for energy storage application. The prepared La2Se3 thin film is characterized by X-ray diffraction, field emission scanning electron microscopy and contact angle measurement techniques for structural, surface morphological and wettability studies, respectively. Energy dispersive X-ray microanalysis (EDAX) is performed in order to obtain the elemental composition of the thin film. The La2Se3 film electrode shows a maximum specific capacitance of 363 F g(-1) in a 0.8 M LiClO4/PC electrolyte at a scan rate of 5 mV s(-1) within 1.3 V/SCE potential range. The specific capacitive retention of 83 % of La2Se3 film electrode is obtained over 1000 cyclic voltammetry cycles. The predominant performance, such as high energy (80 Wh kg(-1)) and power density (2.5 kW kg(-1)), indicates that La2Se3 film electrode facilitates fast ion diffusion during redox processes.

Ultrathin nickel sulfide nano-flames as an electrode for high performance supercapacitor; comparison of symmetric FSS-SCs and electrochemical SCs device

Metal sulfides have received well deserved attention due to their excellent electrical conductivity and thermal stability, as compared to metal oxides, allowing them to achieve a high capacitance and energy density for portable energy storage devices. In this study, the preparation of highly porous nano-flames composed of nickel sulfide (NiS) thin film on a cost effective, flexible stainless steel substrate through a trouble free, inexpensive and simple chemical bath deposition (CBD) method is reported. The prepared nano-flames composed of a NiS thin film demonstrates the excellent electrochemical features with a maximum specific capacitance (Cs) of 750.6 F g−1 at a scan rate of 5 mV s−1 in a three electrode system. Furthermore, the portable symmetric flexible solid state supercapacitor (FSS-SC) and electrochemical supercapacitor (SC) are fabricated and tested. In comparison with the symmetric electrochemical SC, the symmetric FSS-SC shows an excellent electrochemical performance with a high Cs of 104 F g−1 at 5 mV s−1 with a good electrochemical stability of 85.3% over 3000 CV cycles. This study constitutes the first comparison of symmetric FSS-SCs and electrochemical SCs formed with NiS nano-flames. Such an impressive symmetric FSS-SC is predicted to be an exceptionally promising candidate for energy storage systems.

Highly energetic flexible all-solid-state asymmetric supercapacitor with Fe2O3 and CuO thin films

In the present investigation, the applicability of Fe2O3 and CuO thin films as anode and cathode electrodes respectively in supercapacitors has been systematically studied. Fe2O3 and CuO thin films are synthesized by simple and cost effective chemical methods and further more all-solid-state symmetric (Fe2O3/Fe2O3, CuO/CuO) and asymmetric (CuO//Fe2O3) supercapacitor devices are fabricated. The electrochemical properties (cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), electrochemical impedance spectroscopy (ESR), etc.) of these devices are studied using two electrodes system. The asymmetric supercapacitor shows improved performance with maximum operating potential window of 2.0 V and specific capacitance of 79 F g−1 at 2 mA cm−2 current density. The maximum energy density and power density of 23 W h kg−1 and 19 kW kg−1 are obtained for asymmetric supercapacitor. In addition, the asymmetric supercapacitor demonstrates the excellent flexibility with capability retention of 89% over bending at an angle of 180°.

Fabrication of high performance flexible all-solid-state asymmetric supercapacitors with a three dimensional disc-like WO3/stainless steel electrode

Presently, significant attention has been paid towards the rational synthesis of nanostructured anode and cathode electrode materials for assembling high-performance supercapacitors. Despite significant progress being achieved in designing cathode electrode materials, anode electrode materials with high capacitance are hardly investigated. In the present article, a tungsten oxide (WO3) thin film is prepared on a flexible stainless steel substrate by a wet chemical method and used as an anode electrode to fabricate a flexible asymmetric supercapacitor (ASC). An electrochemical investigation of the WO3 thin film shows a maximum specific capacitance of 530 F g−1 at 1 mA cm−2 in a potential window of 0 to −0.8 V in 1 M Na2SO4 electrolyte. In addition, a highly energetic, flexible ASC device is assembled using a WO3 thin film as an anode, a MnO2 thin film as a cathode and polymer gel as an electrolyte. The as-assembled MnO2//WO3 ASC device exhibited a stable electrochemical potential window of 1.8 V and better cycling stability. Whats more, the flexible MnO2//WO3 ASC device achieves a high specific capacitance of 115 F g−1 with an acceptable specific energy of 52 W h kg−1 at a current density of 3 mA. Hence, the proposed flexible MnO2//WO3 ASC device creates one more option for anode materials to develop flexible energy storage devices.