Nils-Olof Nilvebrant

Bioconversion of lignocellulose: inhibitors and detoxification

Bioconversion of lignocellulose by microbial fermentation is typically preceded by an acidic thermochemical pretreatment step designed to facilitate enzymatic hydrolysis of cellulose. Substances formed during the pretreatment of the lignocellulosic feedstock inhibit enzymatic hydrolysis as well as microbial fermentation steps. This review focuses on inhibitors from lignocellulosic feedstocks and how conditioning of slurries and hydrolysates can be used to alleviate inhibition problems. Novel developments in the area include chemical in-situ detoxification by using reducing agents, and methods that improve the performance of both enzymatic and microbial biocatalysts.

Comparison of Different Methods for the Detoxification of Lignocellulose Hydrolyzates of Spruce

This study describes different detoxification methods to improve both cell growth and ethanol production by Bakers yeast, Saccharomyces cerevisiae. A dilute-acid hydrolyzate of spruce was used for the all detoxification methods tested. The changes in the concentrations of fermentable sugars and three groups of inhibitory compounds—aliphatic acids, furan derivatives, and phenolic compounds—were determined and the fermentability of the detoxified hydrolyzate was assayed. The applied detoxification methods included: treatment with alkali (sodium hydroxide or calcium hydroxide); treatment with sulfite (0.1% [w/v] or 1% [w/v] at pH 5.5 or 10); evaporation of 10% or 90% of the initial volume; anion exchange (at pH 5.5 or 10); enzymatic detoxification with the phenoloxidase laccase; and detoxification with the filamentous fungus Trichoderma reesei. An ion exchange at pH 5.5 or 10, treatment with laccase, treatment with calcium hydroxide, and treatment with T. reesei were the most efficient detoxification methods. Evaporation of 10% of the initial volume and treatment with 0.1% sulfite were the least efficient detoxification methods. Treatment with laccase was the only detoxification method that specifically removed only one group of the inhibitors, namely phenolic compounds. Anion exchange at pH 10 was the most efficient method for removing all three major groups of inhibitory compounds; however, it also resulted in loss of fermentable sugars.

Influence of lignocellulose-derived aromatic compounds on oxygen-limited growth and ethanolic fermentation by Saccharomyces cerevisiae.

Phenolic compounds released and generated during hydrolysis inhibit fermentation of lignocellulose hydrolysates to ethanol by Saccharomyces cerevisiae. A wide variety of aromatic compounds form from lignin, which is partially degraded during acid hydrolysis of the lignocellulosic raw material. Aromatic compounds may also form as a result of sugar degradation and dare present in wood as extractives. The influence of hydroxy-methoxy-benzaldehydes, diphenols/quinones, and phenylpropane derivatives on S. cerevisiae cell growth and ethanol formation was assayed using a defined medium and oxygen-limited conditions. The inhibition effected by the hydroxy-methoxy-benzaldehydes was highly dependent on the positions of the substituents. A major difference in inhibition by the oxidized and reduced form of a diphenol/quinone was observed, the oxidized form being the more inhibitory. The phenylpropane derivatives were examined with respect to difference in toxicity depending on the oxidation-reduction state of the γ-carbon, the presence and position of unsaturated bonds in the aliphatic side chain, and the number and identity of hydroxyl and methoxyl substituents. Transformations of aromatic compounds occuring during the fermentation included aldehyde reduction, quinone reduction, and double bond saturation. Aromatic alcohols were detected as products of reductions of the corresponding aldehydes, namely hydroxy-methoxy-benzaldehydes and coniferyl aldehyde. High molecular mass compounds and the corresponding diphenol were detected as products of quinone reduction. Together with coniferyl alcohol, dihydroconiferyl alcohol was identified as a major transformation products of conifery aldehyde.

Detoxification of Lignocellulose Hydrolysates with Ion-Exchange Resins

Lignocellulose hydrolysates contain fermentation inhibitors causing decreased ethanol production. The inhibitors include phenolic compounds, furan aldehydes, and aliphatic acids. One of the most efficient methods for removing inhibiting compounds prior to fermentation is treatment of the hydrolysate with ion-exchange resins. The performance and detoxification mechanism of three different resins were examined: an anion exchanger, a cation exchanger, and a resin without charged groups (XAD8). A dilute acid hydrolysate of spruce was treated with the resins at pH 5.5 and 10.0 prior to ethanolic fermentation with Saccharomyces cerevisiae. In addition to the experiments with hydrolysate, the effect of the resins on selected model compounds, three phenolics (vanillin, guaiacol, and coniferyl aldehyde) and two furan aldehydes (furfural and hydroxymethyl furfural), was determined. The cation exchanger increased ethanol production, but to a lesser extent than XAD-8, which in turn was less effective than the an ion exchanger. Treatment at pH 10.0 was more effective than at pH 5.5. At pH 10.0, the anion exchanger efficiently removed both anionic and uncharged inhibitors, the latter by hydrophobic interactions. The importance of hydrophobic interactions was further indicated by a substantial decrease in the concentration of model compounds, such as guaiacol and furfural, after treatment with XAD-8.

Dilute Sulfuric Acid Pretreatment of Agricultural and Agro-Industrial Residues for Ethanol Production

The potential of dilute-acid prehydrolysis as a pretreatment method for sugarcane bagasse, rice hulls, peanut shells, and cassava stalks was investigated. The prehydrolysis was performed at 122°C during 20, 40, or 60 min using 2% H2SO4 at a solid-to-liquid ratio of 1:10. Sugar formation increased with increasing reaction time. Xylose, glucose, arabinose, and galactose were detected in all of the prehydrolysates, whereas mannose was found only in the prehydrolysates of peanut shells and cassava stalks. The hemicelluloses of bagasse were hydrolyzed to a high-extent yielding concentrations of xylose and arabinose of 19.1 and 2.2 g/L, respectively, and a xylan conversion of more than 80%. High-glucose concentrations (26–33.5 g/L) were found in the prehydrolysates of rice hulls, probably because of hydrolysis of starch of grain remains in the hulls. Peanut shells and cassava stalks rendered low amounts of sugars on prehydrolysis, indicating that the conditions were not severeenough to hydrolyze the hemicelluloses in these materials quantitatively. All prehydrolysates were readily fermentable by Saccharomyces cerevisiae. The dilute-acid prehydrolysis resulted in a 2.7- to 3.7-fold increase of the enzymatic convertibility of bagasse, but was not efficient for improving the enzymatic hydrolysis of peanut shells, cassava stalks, or rice hulls.

Limits for alkaline detoxification of dilute-acid lignocellulose hydrolysates.

In addition to fermentable sugars, dilute-acid hydrolysates of lignocellulose contain compounds that inhibit fermenting microorganisms, such as Saccharomyces cerevisiae. Previous results show that phenolic compounds and furan aldehydes, and to some extent aliphatic acids, act as inhibitors during fermentation of dilute-acid hydrolysates of spruce. Treatment of lignocellulose hydrolysates with alkali, usually in the form of overliming to pH 10.0, has been frequently employed as a detoxification method to improve fermentability. A spruce dilute-acid hydrolysate was treated with NaOH in a factorial design experiment, in which the pH was varied between 9.0 and 12.0, the temperature between 5 and 80°C, and the time between 1 and 7 h. Already at pH 9.0, >25% of the glucose was lost when the hydrolysate was treated at 80°C for 1 h. Among the monosaccharides, xylose was degraded faster under alkaline conditions than the hexoses (glucose, mannose, and galactose), which, in turn, were degraded faster than arabinose. The results suggest that alkali treatment of hydrolysates can be performed at temperatures below 30°C at any pH between 9.0 and 12.0 without problems with sugar degradation or formation of inhibiting aliphatic acids. Treatment with Ca(OH)2 instead of NaOH resulted in more substantial degradation of sugars. Under the harsher conditions of the factorial design experiment, the concentrations of furfural and 5-hydroxymethylfurfural decreased while the total phenolic content increased. The latter phenomenon was tentatively attributed to fragmentation of soluble aromatic oligomers in the hydrolysate. Separate phenolic compounds were affected in different ways by the alkaline conditions with some compounds showing an increase in concentration while others decreased. In conclusion, the conditions used for detoxification with alkali should be carefully controlled to optimize the positive effects and minimize the degradation of fermentable sugars.

Optimal Conditions for Alkaline Detoxification of Dilute-Acid Lignocellulose Hydrolysates

Alkaline detoxification strongly improves the fermentability of dilute-acid hydrolysates in the production of bioethanol from lignocellulose with Saccharomyces cerevisiae. New experiments were performed with NH4OH and NaOH to define optimal conditions for detoxification and make a comparison with Ca(OH)2 treatment feasible. As too harsh conditions lead to sugar degradation, the detoxification treatments were evaluated through the balanced ethanol yield, which takes both the ethanol production and the loss of fermentable sugars into account. The optimization treatments were performed as factorial experiments with 3-h duration and varying pH and temperature. Optimal conditions were found roughly in an area around pH 9.0/60°C for NH4OH treatment and in a narrow area stretching from pH 9.0/80°C to pH 12.0/30°C for NaOH treatment. By optimizing treatment with NH4OH, NaOH, and Ca(OH)2, it was possible to find conditions that resulted in a fermentability that was equal or better than that of a reference fermentation of a synthetic sugar solution without inhibitors, regardless of the type of alkali used. The considerable difference in the amount of precipitate generated after treatment with different types of alkali appears critical for industrial implementation.

Ammonium hydroxide detoxification of spruce acid hydrolysates

When dilute-acid hydrolysates from spruce are fermented to produce ethanol, detoxification is required to make the hydrolysates fermentable at reasonable rates. Treatment with alkali, usually by overliming, is one of the most efficient approaches. Several nutrients, such as ammonium and phosphate, are added to the hydrolysates prior to fermentation. We investigated the use of NH4OH for simultaneous detoxification and addition of nitrogen source. Treatment with NH4OH compared favorably with Ca(OH)2, Mg(OH)2, Ba(OH)2, and NaOH to improve fermentability using Saccharomyces cerevisiae. Analysis of monosaccharides, furan aldehydes, phenols, and aliphatic acids was performed after the different treatments. The NH4OH treatments, performed at pH 10.0, resulted in a substantial decrease in the concentrations of furfural and hydroxymethylfurfural. Under the conditions studied, NH4OH treatments gave better results than Ca(OH)2 treatments. The addition of an extra nitrogen source in the form of NH4Cl at pH 5.5 did not result in any improvement in fermentability that was comparable to NH4OH treatments at alkaline conditions. The addition of CaCl2 or NH4Cl at pH 5.5 after treatment with NH4OH or Ca(OH)2 resulted in poorer fermentability, and the negative effects were attributed to salt stress. The results strongly suggest that the highly positive effects of NH4OH treatments are owing to chemical conversions rather than stimulation of the yeast cells by ammonium ions during the fermentation.

Cellulase Production from Spent Lignocellulose Hydrolysates by Recombinant Aspergillus niger

ABSTRACT A recombinant Aspergillus niger strain expressing the Hypocrea jecorina endoglucanase Cel7B was grown on spent hydrolysates (stillage) from sugarcane bagasse and spruce wood. The spent hydrolysates served as excellent growth media for the Cel7B-producing strain, A. niger D15[egI], which displayed higher endoglucanase activities in the spent hydrolysates than in standard medium with a comparable monosaccharide content (e.g., 2,100 nkat/ml in spent bagasse hydrolysate compared to 480 nkat/ml in standard glucose-based medium). In addition, A. niger D15[egI] was also able to consume or convert other lignocellulose-derived compounds, such as acetic acid, furan aldehydes, and phenolic compounds, which are recognized as inhibitors of yeast during ethanolic fermentation. The results indicate that enzymes can be produced from the stillage stream as a high-value coproduct in second-generation bioethanol plants in a way that also facilitates recirculation of process water.

Critical conditions for improved fermentability during overliming of acid hydrolysates from spruce

Bioethanol can be produced from wood via acid hydrolysis, but detoxification is needed to achieve good fermentability. Overliming was investigated in a factorial designed experiment, in which pH and temperature were varied. Degradation of inhibitory furan aldehydes was more extensive compared to monosaccharides. Too harsh conditions led to massive degradation of sugars and formation of inhibiting acids and phenols. The ethanol productivity and yield after optimal overliming reached levels exceeding reference fermentations of pure glucose. A novel metric, the balanced ethanol yield, which takes both ethanol production and losses of fermentable sugars into account, was introduced and showed the optimal conditions within the investigated range. The findings allow process technical and economical considerations to govern the choice of conditions for overliming.