Nilsun Bagis

Comparison of intraoral radiography and cone-beam computed tomography for the detection of periodontal defects: an in vitro study

BackgroundThis study aimed to compare the diagnostic accuracy of cone-beam computed tomography (CBCT) unit with digital intraoral radiography technique for detecting periodontal defects.MethodsThe study material comprised 12 dry skulls with maxilla and mandible. Artificial defects (dehiscence, tunnel, and fenestration) were created on anterior, premolar and molar teeth separately using burs. In total 14 dehiscences, 13 fenestrations, eight tunnel and 16 without periodontal defect were used in the study. These were randomly created on dry skulls. Each teeth with and without defects were images at various vertical angles using each of the following modalities: a Planmeca Promax Cone Beam CT and a Digora photostimulable phosphor plates. Specificity and sensitivity for assessing periodontal defects by each radiographic technique were calculated. Chi-square statistics were used to evaluate differences between modalities. Kappa statistics assessed the agreement between observers. Results were considered significant at P < 0.05.ResultsThe kappa values for inter-observer agreement between observers ranged between 0.78 and 0.96 for the CBCT, and 0.43 and 0.72 of intraoral images. The Kappa values for detecting defects on anterior teeth was the least, following premolar and molar teeth both CBCT and intraoral imaging.ConclusionsCBCT has the highest sensitivity and diagnostic accuracy for detecting various periodontal defects among the radiographic modalities examined.

High sensitivity detection of salivary 8-hydroxy deoxyguanosine levels in patients with chronic periodontitis

BACKGROUND Inflammation is associated with hydroxyl radical damage to DNA as a result of oxidative stress. 8-Hydroxy deoxyguanosine (8-OHdG) is a marker of this process and its levels in saliva could be linked to the severity of periodontal inflammation. The aim of this study was to test the sensitivity of liquid chromatography with tandem mass spectrometry (LC-MS/MS) in comparison to enzyme-linked immune sorbent assay (ELISA) for the detection of 8-OHdG in saliva in patients with chronic periodontitis before and after periodontal treatment. METHODS Saliva samples were collected from 23 patients (eight females and 15 males; 46.1 ± 5.1 years of age) with generalized chronic periodontitis and 25 (15 females and 10 males; 44.9 ± 6.8 years of age) periodontally healthy individuals. Patients received initial periodontal treatment consisting of scaling and root planing and were evaluated at baseline and after 6 wk of completion of non-surgical therapy. Salivary 8-OHdG levels were measured using ELISA and LC-MS/MS before and after the treatment. Clinically, plaque index, gingival index, clinical attachment level, bleeding on probing, gingival recession and probing pocket depth were measured at baseline and after 6 wk. RESULTS Salivary levels of 8-OHdG decreased significantly after the non-surgical periodontal treatment (p < 0.001). Statistically significant positive correlations were observed between plaque index, gingival index, probing pocket depth, clinical attachment level, bleeding on probing values and LC-MS/MS and ELISA levels of 8-OHdG (p < 0.001). CONCLUSION LC-MS/MS is a reliable and sensitive method for evaluating salivary 8-OHdG levels to monitor the treatment response of periodontitis.

Survival Rate of Short, Locking Taper Implants with a Plateau Design: A 5-Year Retrospective Study

Background. Short implants have become popular in the reconstruction of jaws, especially in cases with limited bone height. Shorter implants, those with locking tapers and plateau root shapes, tend to have longer survival times. We retrospectively investigated the cumulative survival rates of Bicon short implants (<8 mm) according to patient variables over a 5-year period. Materials and Methods. This study included 111 consecutively treated patients with 371 implants supporting fixed or removable prosthetics. Data were evaluated to acquire cumulative survival rates according to gender, age, tobacco use, surgical procedure, bone quality, and restoration type. Statistics were performed using chi-square, Mann-Whitney, and Kruskal Wallis H tests. Results. The survival rate was 97.3% with, on average, 22.8 months of follow-up. Patients older than 60 years had higher failure rate than the other age groups (P < 0.05). Placed region, age, and bone quality had adverse effects on survival rate in the <8 mm implant group with statistically significant difference (P < 0.05). Conclusions. Approximately 23-month follow-up data indicate that short implants with locking tapers and plateau-type roots have comparable survival rates as other types of dental implants. However, due to limitations of study, these issues remain to be further investigated in future randomized controlled clinical trials.

Burnout and occupational participation among dentists with teaching responsibilities in universities

Abstract The aim of this study was to investigate the levels of burnout and explore the relationships between burnout and occupational participation among dentists with teaching responsibilities. Canadian Occupational Performance Measure (COPM) was used to evaluate occupational participation with questions on demographic information among 155 dentists with teaching responsibilities. Age, gender, years of experience, academic position were the factors affecting level of burnout and occupational participation. Occupational performance score was negatively correlated with emotional exhausment (r = –.731) and depersonalization (r = –.693) while positively correlated with personal accomplishment (r = .611). Occupational satisfaction scores were negatively correlated with emotional exhausment (r = –.631) and depersonalization (r = –.625) while positively correlated with personal accomplishment (r = .614). Occupational participation level can effect burnout among dentists with teaching responsibilities. Further studies with a larger sample are needed to investigate these preliminary results deeply.

Comparison of the burr and chemically induced periodontal defects using different field-of-view sizes and voxel resolutions

OBJECTIVE This study assessed the use of different voxel resolutions in a cone beam computed tomography (CBCT) unit for the detection of artificially induced periodontal bone defects created using burr, burr and chemicals, and only chemicals. STUDY DESIGN Seven dry skulls were used in this study. In total, 65 dehiscence defects, 43 fenestration defects, and 76 control sites with no periodontal defects were examined. Images were obtained from a CBCT unit (3 D Accuitomo; J Morita Mfg. Corp., Kyoto, Japan), using 3 field-of-view (FOV) sizes (4 × 4 cm; 6 × 6 cm; and 8 × 8 cm) and 4 scan modes (standard, high-definition, high-fidelity, and low-dose). RESULTS Overall, κ coefficients for interobserver agreement on burr-induced periodontal defects ranged from 0.336 to 0.795, with the lowest κ value (indicating a fair degree of agreement) obtained for images acquired in standard mode with a voxel size of 0.160 mm3. κ coefficients for the detection of periodontal defects were highest (indicating moderate to high degrees of interobserver agreement) for smaller voxel sizes and high-resolution images. Statistical comparison among groups (burr, burr + chemicals, and chemicals only) was performed using 1-way analysis of variance with post hoc tests. CONCLUSIONS The CBCT scan mode may affect the diagnosis of periodontal defects. The technique used to create periodontal defects also affected diagnosis. For this kind of experiment, burr-induced or burr + chemical-induced defects should be used, rather than those induced solely using a chemical technique.

Association between burnout and depressive symptoms among Turkish dentists

Background/purpose Health care professionals including dentists can experience increased professional burnout. The aim of the study was to evaluate the association between depressive symptoms and burnout among Turkish dentists. Materials and methods This study was conducted among a Turkish dentist sample in Ankara (Turkey) between February 2015 and August 2015. From a total of 500 dentists, 337 were included. A self-structured questionnaire, Maslach Burnout Inventory (MBI), and Beck Depression Inventory (BDI) were completed by the participants. The Student t test or analysis of variance was used to compare the variables. Results A total of 337 dentists (162 female dentists; mean age of participants 36 ± 4.45 years) participated in this study. Age, sex, professional status, years in profession, sector, and number of patients seen/d were factors affecting level of burnout (P < 0.05); 29% of the participants showed burnout and 22.2% showed depressive symptoms. Participants showed increase in emotional exhaustion (38%), increase in depersonalization (22%), and decrease in personal accomplishment (12%). The mean score of BDI significantly correlated with those of the MBI subscales (P < 0.05). All items of BDI except weight loss, irritability, and loss of appetite significantly correlated with MBI subscores (P < 0.05). Conclusion Dentists may face burnout and depressive symptoms during their professional life. Increased burnout level can give an idea on depressive symptoms, and may provide an opportunity to identify depression earlier. Creating and raising awareness about burnout are important to avoid and prevent depression among dentists. Further longitudinal studies analyzing the effects of interdisciplinary client-centered self-management programs for dentists on depressive symptoms and burnout must be planned.

Cone beam computed tomography evaluation of mandibular canal anterior loop morphology and volume in a group of Turkish patients

ABSTRACT The aim of the present study was to assess the presence and course of the anterior loop in the mental foramen region according to age and gender, using cone beam computed tomography (CBCT). Both the right and left sides were retrospectively studied in 141 patients (n = 282). Axial, sagittal, cross-sectional and panoramic images were evaluated and three-dimensional images were reconstructed and evaluated as necessary. The morphology, course and length of the anterior loop were measured. The reliability and reproducibility were assessed based on the intraclass correlation coefficient (ICC) and the coefficient of variation. An anterior loop was found in about 86% of the scans. The mean anterior loop proximal edge was 3.15 mm and the mean distance between the buccal border of the anterior loop and buccal alveolar wall was 2.24 mm. The mean volume of the mandibular canal was 1140 mm3 and the mean volume of the anterior loop was 90 mm3. Statistically significant difference was found in male patients in terms of the canal and anterior loop volume (p < 0.05). A high prevalence of anterior loop was detected by CBCT imaging, with predominance in female patients. Clinicians should be careful during implant or bone surgery procedures to avoid possible complications, with special emphasis on patient age, using this imaging modality that involves use of less radiation.