Nilwala Kottegoda

Urea-Hydroxyapatite Nanohybrids for Slow Release of Nitrogen

While slow release of chemicals has been widely applied for drug delivery, little work has been done on using this general nanotechnology-based principle for delivering nutrients to crops. In developing countries, the cost of fertilizers can be significant and is often the limiting factor for food supply. Thus, it is important to develop technologies that minimize the cost of fertilizers through efficient and targeted delivery. Urea is a rich source of nitrogen and therefore a commonly used fertilizer. We focus our work on the synthesis of environmentally benign nanoparticles carrying urea as the crop nutrient that can be released in a programmed manner for use as a nanofertilizer. In this study, the high solubility of urea molecules has been reduced by incorporating it into a matrix of hydroxyapatite nanoparticles. Hydroxyapatite nanoparticles have been selected due to their excellent biocompatibility while acting as a rich phosphorus source. In addition, the high surface area offered by nanoparticles allows binding of a large amount of urea molecules. The method reported here is simple and scalable, allowing the synthesis of a urea-modified hydroxyapatite nanohybrid as fertilizer having a ratio of urea to hydroxyapatite of 6:1 by weight. Specifically, a nanohybrid suspension was synthesized by in situ coating of hydroxyapatite with urea at the nanoscale. In addition to the stabilization imparted due to the high surface area to volume ratio of the nanoparticles, supplementary stabilization leading to high loading of urea was provided by flash drying the suspension to obtain a solid nanohybrid. This nanohybrid with a nitrogen weight of 40% provides a platform for its slow release. Its potential application in agriculture to maintain yield and reduce the amount of urea used is demonstrated.

Culture media profoundly affect Candida albicans and Candida tropicalis growth, adhesion and biofilm development

As there are sparse data on the impact of growth media on the phenomenon of biofilm development for Candida we evaluated the efficacy of three culture media on growth, adhesion and biofilm formation of two pathogenic yeasts, Candida albicans and Candida tropicalis. The planktonic phase yeast growth, either as monocultures or mixed cultures, in sabouraud dextrose broth (SDB), yeast nitrogen base (YNB), and RPMI 1640 was compared, and adhesion as well as biofilm formation were monitored using MTT and crystal violet (CV) assays and scanning electron microscopy. Planktonic cells of C. albicans, C. tropicalis and their 1:1 co-culture showed maximal growth in SDB. C. albicans/C. tropicalis adhesion was significantly facilitated in RPMI 1640 although the YNB elicited the maximum growth for C. tropicalis. Similarly, the biofilm growth was uniformly higher for both species in RPMI 1640, and C. tropicalis was the slower biofilm former in all three media. Scanning electron microscopy images tended to confirm the results of MTT and CV assay. Taken together, our data indicate that researchers should pay heed to the choice of laboratory culture media when comparing relative planktonic/biofilm growth of Candida. There is also a need for standardisation of biofilm development media so as to facilitate cross comparisons between laboratories.

Encapsulation of curcumin into layered double hydroxides

Abstract This study focuses on the encapsulation of natural curcumin present in turmeric (Curcuma longa L.) into a layered double hydroxide (LDH), which demonstrates slow release properties with future potential in therapeutic applications such as slow release wound dressings. Turmeric has been used in traditional medicinal applications since ancient times. The main active substances in turmeric are curcumin together with two related compounds, demethoxycurcumin (DMC) and bisdemethoxycurcumin (BDMC), which have been extensively studied as antibacterial compounds. However, these molecules are unstable and, therefore, demonstrate limited biological activity and practical applications. In this study, attempts were made to synthesize curcumin in-situ encapsulated layered LDHs in order to stabilize the curcumin molecules within the nanolayers of the LDHs. The curcumin intercalated LDHs were synthesized by a simple in-situ co-precipitation method. The release characteristics of curcumin from the nanocomposites were quantitatively monitored under different pH conditions using UV-Visible spectroscopic methods, and the results indicate that the nanocomposite has the future potential in slow release therapeutic applications.

Natural curcuminoids encapsulated in layered double hydroxides: a novel antimicrobial nanohybrid

Currently, there is an increased scientific interest to discover plant based drug formulations with improved therapeutic potential. Among the cornucopia of traditional medicinal plants, Curcuma longa rhizomes have been used as a powerful antibacterial and antifungal agent. However, its practical applications are limited due to its instability under thermal and UV radiation and its low bioavailability and the extensive procedures needed for isolation. This study focuses on exploring the potential of nanotechnology-based approaches to stabilize the natural curcuminoids, the major active components in turmeric without the need for its isolation, and to evaluate the release characteristics, stability and antimicrobial activity of the resulting nanohybrids. Natural curcuminoids were selectively encapsulated into nanolayers present in Mg–Al-layered double hydroxides (LDHs) using a method that avoids any isolation of the curcuminoids. The products were characterized using solid state techniques, while thermal and photo-stability were studied using thermogravimetric analysis (TGA) and UV exposure data. The morphological features were studied using scanning electron microscope (SEM) and transmission electron microscope (TEM). Drug release characteristics of the nanohybrid were quantitatively monitored under pH 3 and 5, and therapeutic potentials were assessed by using distinctive kinetic models. Finally, the antimicrobial activity of curcuminoids-LDH was tested against three bacterial and two fungal species. Powder X-ray diffraction, Fourier transform infra-red spectroscopy, SEM and TEM data confirmed the successful and selective encapsulation of curcuminoids in the LDH, while the TGA and UV exposure data suggested the stabilization of curcuminoids within the LDH matrix. The LDH demonstrated a slow and a sustained release of the curcuminoids in an acidic medium, while it was active against the three bacteria and two fungal species used in this study, suggesting its potential applications in pharmaceutical industry.Graphical abstractSynthesis of Curcuminoid-LDH by coprecipitation method and the slow release process of curcuminoids from LDH matrix

Silica Based Superhydrophobic Nanocoatings for Natural Rubber Surfaces

Silica based nonfluorinated superhydrophobic coatings for natural rubber surfaces have been developed. The coating was synthesized using nanosilica dispersion and a polychloroprene type binder as a compatibilizer. This nanocoating of silica was applied on to the surface of finished natural rubber gloves, by spray coating or dipped coating methods. The nanocoating demonstrates a water contact angle of more than 150° and sliding angle of 7°. The morphological features of the coating have been studied using scanning electron microscopy and atomic force microscopy while Fourier transform infrared spectroscopy was used to understand the nature of surface functional groups. Both imaging techniques provided evidence for the presence of nanosized particles in the coating. Coated gloves demonstrated comparable mechanical properties and significantly better alcohol resistivity when compared to those of the uncoated gloves.

Synthesis of magnetite nanoparticles by top-down approach from a high purity ore

This study attempts to synthesize magnetite nanoparticles from a high purity natural iron oxide ore found in Panvila, Sri Lanka, following a novel top-down approach. Powder X-Ray diffraction, elemental analysis, and chemical analysis data confirmed the ore to be exclusively magnetite with Fe2+: Fe3+ ratio of 1 : 2. Surface modified magnetite nanoparticles were synthesized by destructuring of this ore using a top-down approach in the presence of oleic acid. These oleic acid coated nanoparticles were further dispersed in ethanol resulting in stable nanomagnetite dispersion. Interestingly, the nanoparticles demonstrated a spherical morphology with a particle size ranging from 20 to 50 nm. Magnetic force microscopic data was used to confirm the topography of the nanoparticles and to study the magnetic domain structure.

Effect of natural curcuminoids-intercalated layered double hydroxide nanohybrid against Staphylococcus aureus, Pseudomonas aeruginosa, and Enterococcus faecalis: A bactericidal, antibiofilm, and mechanistic study

The study aimed to determine the antibacterial/antibiofilm effect and mechanism of interaction of curcuminoids‐intercalated Mg/Al layered double hydroxide (curcuminoids‐LDH) against three different bacteria. Antimicrobial effect of curcuminoids‐LDH nanohybrid was investigated against P. aeruginosa, S. aureus, and E. faecalis (for both standard strains and clinical isolates), using agar well diffusion method. Minimum inhibitory concentrations (MIC) of planktonic bacteria were determined using the broth microdilution method. MIC of biofilms (MBIC50) and killing time for 48 hr matured biofilms were determined by MTT (3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay. Scanning electron microscopy (SEM) was used to determine pre‐ and postexposure architecture of biofilms. The mechanism of the antibiofilm activity of curcuminoids‐LDH was determined using UV‐visible spectroscopy. All tested bacteria had given a zone of inhibition in the presence of curcuminoids‐LDH. The MIC values were 0.200 g/ml for P. aeruginosa, 0.025 g/ml for S. aureus, and 0.100 g/ml for E. faecalis. The 48 hr matured biofilms were reduced by curcuminoids‐LDH with an MBIC50 of 0.100 g/ml. The minimum time to achieve MBIC50 was 3 hr, and the reduction was constant until 48 hr. SEM images showed a significant reduction of biofilm cell density and exopolymer matrics for all biofilms in the presence of curcuminoids‐LDH. UV‐visible studies revealed the antibiofilm activity of curcuminoids‐LDH as due to the auto‐oxidation of curcuminoids. The oxidation products are more limited in both product concentration per unit time and the variety of products, compared to pure curcuminoids, resulting in sharper UV‐visible peaks than in the case of the latter. Curcuminoids‐LDH has a potential antibacterial activity against P. aeruginosa, S. aureus, and E. faecalis. An antibiofilm activity has been achieved within 3 hr of the treatment. Curcuminoids released from the LDH showed the antibacterial activity due to oxidation products interfering with bacterial cell functions, and also encapsulation in the LDH causes curcuminoids to exhibit the activity in a persistent manner compared to pure curcuminoids.

Influence of Laboratory Culture Media on In-vitro Growth, Adhesion and Biofilm Formation of Pseudomonas aeruginosa and Staphylococcus aureus

Objective: Pseudomonas aeruginosa and Staphylococcus aureus dual-species biofilm infections are notoriously difficult to manage. This study aimed at investigating the influence of four different culture media on the planktonic growth, adhesion, and biofilm formation of P. aeruginosa and S. aureus. Materials and Methods: We monitored four different culture media including Nutrient Broth, Brain Heart Infusion (BHI) broth, Luria-Bertani broth, and RPMI 1640 medium on the planktonic growth, adhesion, and biofilm formation of P. aeruginosa (ATCC 27853) and S. aureus (ATCC 25923) using MTT assay and scanning electron microscopy (SEM). Results: The most robust growth of the mono- and dual-species cultures was noted in BHI broth. On the contrary, RPMI 1640 medium promoted maximal initial adhesion of both the mono- and dual-species, but BHI broth fostered the maximal biofilm growth. SEM images showed profuse extracellular polysaccharide production in biofilms, particularly in coculture, in BHI medium. Conclusion: Our data demonstrate that BHI broth, relative to the other tested media, is the most conducive for in vitro evaluation of biofilm and planktonic growth kinetics of these two pathogens, both in mono- and coculture.

Effect of Citric Acid Surface Modification on Solubility of Hydroxyapatite Nanoparticles

Worldwide, there is an amplified interest in nanotechnology-based approaches to develop efficient nitrogen, phosphorus, and potassium fertilizers to address major challenges pertaining to food security. However, there are significant challenges associated with fertilizer manufacture and supply as well as cost in both economic and environmental terms. The main issues relating to nitrogen fertilizer surround the use of fossil fuels in its production and the emission of greenhouse gases resulting from its use in agriculture; phosphorus being a mineral source makes it nonrenewable and casts a shadow on its sustainable use in agriculture. This study focuses on development of an efficient P nutrient system that could overcome the inherent problems arising from current P fertilizers. Attempts are made to synthesize citric acid surface-modified hydroxyapatite nanoparticles using wet chemical precipitation. The resulting nanohybrids were characterized using powder X-ray diffraction to extract the crystallographic data, while functional group analysis was done by Fourier transform infrared spectroscopy. Morphology and particle size were studied using scanning electron microscopy along with elemental analysis using energy-dispersive X-ray diffraction spectroscopy. Its effectiveness as a source of P was investigated using water release studies and bioavailability studies using Zea mays as the model crop. Both tests demonstrated the increased availability of P from nanohybrids in the presence of an organic acid compared with pure hydroxyapatite nanoparticles and rock phosphate.

The Effect of Nutritive and Non-nutritive sweeteners on the Growth, Adhesion and Biofilm Formation of Candida albicans and Candida tropicalis

Objective: To determine the effect of glucose, sucrose, and saccharin on growth, adhesion, and biofilm formation of Candida albicans and Candida tropicalis. Materials and Methods: The growth rates of mono-cultures of planktonic C. albicans and C. tropicalis and 1:1 mixed co-cultures were determined in yeast nitrogen broth supplemented with 5% (30 mM) and 10% (60 mM) glucose, sucrose, and saccharin, using optical density measurements at 2-h intervals over a 14-h period. Adhesion and biofilm growth were performed and the growth quantified using a standard 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The biofilm architecture was visualized using scanning electron microscopy. One- and two-way analysis of variance (ANOVA) was performed to analyse the differences among multiple means. Results: The highest planktonic growth was noted in 5% glucose after 14 h (p < 0.05). No significant planktonic growth was observed in either concentration of saccharin. Both the concentrations of glucose and sucrose elicited significantly increased adhesion from MTT activity of 0.017 to >0.019 in mono- as well as co-cultures (p < 0.05), whilst the lower concentration of saccharin significantly dampened the adhesion. Maximal biofilm growth was observed in both species with the lower concentration of sucrose (5%), although a similar concentration of saccharin abrogated biofilm development: the highest MTT value (>0.35) was obtained for glucose and the lowest (>0.15) for saccharin. Conclusion: In this study, glucose and sucrose accelerated the growth, adhesion, and biofilm formation of Candida species. However, the non-nutritive sweetener saccharin appeared to dampen, and in some instances suppress, these virulent attributes of Candida.