Niva A. Ran

Harvesting the Full Potential of Photons with Organic Solar Cells

A low-bandgap polymer:fullerene blend that has significantly reduced energetic losses from photon absorption to VOC is described. The charge-transfer state and polymer singlet are of nearly equal energy, yet the short-circuit current still reaches 14 mA cm(-2).

Understanding the Charge‐Transfer State and Singlet Exciton Emission from Solution‐Processed Small‐Molecule Organic Solar Cells

Electroluminescence (EL) from the charge-transfer state and singlet excitons is observed at low applied voltages from high-performing small-molecule bulk-heterojunction solar cells. Singlet emission from the blends emerges upon altering the processing conditions, such as thermal annealing and processing with a solvent additive, and correlates with improved photovoltaic performance. Low-temperature EL measurements are utilized to access the physics behind the singlet emission.

Limits for Recombination in a Low Energy Loss Organic Heterojunction

Donor-acceptor organic solar cells often show high quantum yields for charge collection, but relatively low open-circuit voltages (VOC) limit power conversion efficiencies to around 12%. We report here the behavior of a system, PIPCP:PC61BM, that exhibits very low electronic disorder (Urbach energy less than 27 meV), very high carrier mobilities in the blend (field-effect mobility for holes >10-2 cm2 V-1 s-1), and a very low driving energy for initial charge separation (50 meV). These characteristics should give excellent performance, and indeed, the VOC is high relative to the donor energy gap. However, we find the overall performance is limited by recombination, with formation of lower-lying triplet excitons on the donor accounting for 90% of the recombination. We find this is a bimolecular process that happens on time scales as short as 100 ps. Thus, although the absence of disorder and the associated high carrier mobility speeds up charge diffusion and extraction at the electrodes, which we measure as early as 1 ns, this also speeds up the recombination channel, giving overall a modest quantum yield of around 60%. We discuss strategies to remove the triplet exciton recombination channel.

Impact of interfacial molecular orientation on radiative recombination and charge generation efficiency

A long standing question in organic electronics concerns the effects of molecular orientation at donor/acceptor heterojunctions. Given a well-controlled donor/acceptor bilayer system, we uncover the genuine effects of molecular orientation on charge generation and recombination. These effects are studied through the point of view of photovoltaics—however, the results have important implications on the operation of all optoelectronic devices with donor/acceptor interfaces, such as light emitting diodes and photodetectors. Our findings can be summarized by two points. First, devices with donor molecules face-on to the acceptor interface have a higher charge transfer state energy and less non-radiative recombination, resulting in larger open-circuit voltages and higher radiative efficiencies. Second, devices with donor molecules edge-on to the acceptor interface are more efficient at charge generation, attributed to smaller electronic coupling between the charge transfer states and the ground state, and lower activation energy for charge generation.Molecular orientation profoundly affects the performance of donor-acceptor heterojunctions, whilst it has remained challenging to investigate the detail. Using a controllable interface, Ran et al. show that the edge-on geometries improve charge generation at the cost of non-radiative recombination loss.

Structural variations to a donor polymer with low energy losses

Two regioregular narrow bandgap conjugated polymers with a D′–A–D–A repeat unit architecture, namely PIFCF and PSFCF, were designed and synthesized. Both polymers contain strictly organized fluorobenzo[c][1,2,5]thiadiazole (FBT) orientations and different solubilizing side chains for solution processing. Compared to the previously reported asymmetric pyridyl-[2,1,3]thiadiazole (PT) based regioregular polymer, namely PIPCP, PIFCF and PSFCF exhibit wider bandgaps, tighter π–π stacking, and improved hole mobilities. When incorporated into solar cells with fullerene acceptors, the Eloss = Eg − eVoc values of PIFCF and PSFCF devices are increased compared to solar cells based on PIPCP. Determination of Ect in these solar cells reveals that, relative to PIPCP, PIFCF solar cells lose more energy from Eg − Ect, and PSFCF solar cells lose more energy from both Eg − Ect and Ect − eVoc. The close structural relationship between PIPCP and PIFCF provides an excellent framework to establish molecular features that impact the relationship between Eg and Ect. Theoretical calculations predict that Eloss of PIFCF:PC61BM would be higher than in the case of PIPCP:PC61BM, due to greater Eg − Ect. These findings provide insight into the design of high performance, low voltage loss photovoltaic polymeric materials with desirable optoelectronic properties.

Measuring the competition between bimolecular charge recombination and charge transport in organic solar cells under operating conditions

The rational design of new high performance materials for organic photovoltaic (OPV) applications is largely inhibited by a lack of design rules for materials that have slow bimolecular charge recombination. Due to the complex device physics present in OPVs, rigorous and reliable measurement techniques for charge transport and charge recombination are needed to construct improved physical models that can guide materials development and discovery. Here, we develop a new technique called impedance-photocurrent device analysis (IPDA) to quantitatively characterize the competition between charge extraction and charge recombination under steady state operational conditions. The measurements are performed on actual lab scale solar cells, have mild equipment requirements, and can be integrated into normal device fabrication and testing workflows. We perform IPDA tests on a broad set of devices with varying polymer:fullerene blend chemistry and processing conditions. Results from the IPDA technique exhibit significantly improved reliability and self-consistency compared to the open-circuit voltage decay technique (OCVD). IPDA measurements also reveal a significant negative electric field dependence of the bimolecular recombination coefficient in high fill factor devices, a finding which is inaccessible to most other common techniques and indicates that many of these techniques may overestimate the value that is most relevant for describing device performance. Future work utilizing IPDA to build structure–property relationships for bimolecular recombination will lead to enhanced design rules for creating efficient OPVs that are suitable for commercialization.

Research Data Supporting Order Enables Efficient Electron-hole Separation at an Organic Heterojunction with a Small Energy Loss

Pump Push Probe Transient Absorption Images for PIPCP and PIPCP:PCBM Films. Images were acquired as described in the associated manuscript. Images were acquired as a function of Pump Probe delay time at a variety of Pump Push delays, Push energies, Push fluences, and Pump fluences. Also included are the Pump Probe and Push Probe images that are acquired simultaneously