Nobuo Ouchi

Research and Development Program on Accelerator Driven Subcritical System in JAEA

For a dedicated transmutation system, Japan Atomic Energy Agency (JAEA) has been proceeding with the research and development on an accelerator-driven subcritical system (ADS). The ADS proposed by JAEA is a lead-bismuth eutectic (LBE) cooled fast subcritical core with 800 MWth. JAEA has started a comprehensive research and development (R&D) program since the fiscal year of 2002 to acquire knowledge and elemental technology that are necessary for the validation of engineering feasibility of the ADS. In this paper, the outline and the results in the first three-year stage of the program are reported. Items of R&D were concentrated on three technical areas peculiar to the ADS: (1) a superconducting linear accelerator (SC-LINAC), (2) the LBE as spallation target and core coolant, and (3) a subcritical core design and reactor physics of the ADS. For R&D on the accelerator, a prototype cryomodule was built and its good performance in electric field was examined. For R&D on the LBE, various technical data for material corrosion, thermal-hydraulics and radioactive impurity were obtained by loop tests and reactor irradiation. For R&D on the subcritical core, engineering feasibility for the LBE cooled tank-type ADS was discussed using thermal-hydraulic and structural analysis not only in normal operation but also in transient situations. Reactor physics experiments for subcritical monitoring and physics parameters of the ADS were also performed at critical assemblies.

Development of superconducting cavities for high intensity proton accelerator at JAERI

The Japan Atomic Energy Research Institute (JAERI) is proposing a high intensity proton accelerator for the Neutron Science Project. A superconducting (SC) RF structure is the main option for the high energy part of the linac. Design and development work of the SC proton linac is in progress in JAERI. Three single-cell SC prototype cavities were fabricated and their performances were tested. The test results were good enough to apply to the SC linac. This paper describes the present status of the design and development work for the SC proton linac.

Beam Monitors for the Commissioning of Energy Upgraded Linac

In 2009, Japan Proton Accelerator Research Complex (J-PARC) began a project to upgrade the J-PARC Linac using the annular-ring coupled structure linac cavities. The aim was to achieve a beam power of 1 MW at the exit of the downstream rapid cycling synchrotron. For the upgraded beam line, beam monitors were designed, fabricated, and laid out considering the beam commissioning strategy. This study introduces the beam monitor layout in the new beam line and the results of commissioning, which confirm appropriate functioning of the beam monitors.

Upgrade and Operation of J-PARC Linac

Kazuo HASEGAWA*, Hidetomo OGURI, Takashi ITO, Etsuji CHISHIRO, Koichiro HIRANO, Takatoshi MORISHITA, Shinichi SHINOZAKI, Hiroyuki AO, Kiyonori OHKOSHI, Yasuhiro KONDO, Jun TAMURA, Saishun YAMAZAKI, Toshihiko HORI, Fumiaki SATO, Yasuo NEMOTO, Isao KOIZUMI, Nobuo OUCHI, Nobuhiro KIKUZAWA, Akira UENO, Akihiko MIURA, Shinpei FUKUTA, Akinobu YOSHII, Koichi SATO, Akira OZONE, Yuki SAWABE, Yusuke KAWANE, Hiroshi IKEDA, Yuichi ITO, Yuko KATO, Kazuo KIKUCHI, Fumio HIROKI, Toshio TAKAYASU, Tsutomu USAMI, Munetoshi YANAI, Kazuhiko TADOKORO, Kenji OHSAWA, Fujio NAITO, Yong LIU, Zhigao FANG, Takashi SUGIMURA, Kenta FUTATSUKAWA, Kiyoshi IKEGAMI, Masato KAWAMURA, Kesao NANMO, Yuji FUKUI, Tomoaki MIYAO, Tomofumi MARUTA and Akira TAKAGI