Noejung Park

Promotion of oxygen reduction by a bio-inspired tethered iron phthalocyanine carbon nanotube-based catalyst.

Electrocatalysts for oxygen reduction are a critical component that may dramatically enhance the performance of fuel cells and metal-air batteries, which may provide the power for future electric vehicles. Here we report a novel bio-inspired composite electrocatalyst, iron phthalocyanine with an axial ligand anchored on single-walled carbon nanotubes, demonstrating higher electrocatalytic activity for oxygen reduction than the state-of-the-art Pt/C catalyst as well as exceptional durability during cycling in alkaline media. Theoretical calculations suggest that the rehybridization of Fe 3d orbitals with the ligand orbitals coordinated from the axial direction results in a significant change in electronic and geometric structure, which greatly increases the rate of oxygen reduction reaction. Our results demonstrate a new strategy to rationally design inexpensive and durable electrochemical oxygen reduction catalysts for metal-air batteries and fuel cells.

Nitrogenated holey two-dimensional structures

Recent graphene research has triggered enormous interest in new two-dimensional ordered crystals constructed by the inclusion of elements other than carbon for bandgap opening. The design of new multifunctional two-dimensional materials with proper bandgap has become an important challenge. Here we report a layered two-dimensional network structure that possesses evenly distributed holes and nitrogen atoms and a C2N stoichiometry in its basal plane. The two-dimensional structure can be efficiently synthesized via a simple wet-chemical reaction and confirmed with various characterization techniques, including scanning tunnelling microscopy. Furthermore, a field-effect transistor device fabricated using the material exhibits an on/off ratio of 107, with calculated and experimental bandgaps of approximately 1.70 and 1.96 eV, respectively. In view of the simplicity of the production method and the advantages of the solution processability, the C2N-h2D crystal has potential for use in practical applications.

Facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free eletrocatalysts for oxygen reduction reaction

A series of edge-selectively halogenated (X = Cl, Br, I) graphene nanoplatelets (XGnPs = ClGnP, BrGnP, IGnP) were prepared simply by ball-milling graphite in the presence of Cl2, Br2 and I2, respectively. High BET surface areas of 471, 579 and 662 m2/g were observed for ClGnP, BrGnP and IGnP, respectively, indicating a significant extent of delamination during the ball-milling and subsequent workup processes. The newly-developed XGnPs can be well dispersed in various solvents, and hence are solution processable. Furthermore, XGnPs showed remarkable electrocatalytic activities toward oxygen reduction reaction (ORR) with a high selectivity, good tolerance to methanol crossover/CO poisoning effects, and excellent long-term cycle stability. First-principle density-functional calculations revealed that halogenated graphene edges could provide decent adsorption sites for oxygen molecules, in a good agreement with the experimental observations.

Synthesis and Characterization of Patronite Form of Vanadium Sulfide on Graphitic Layer

With the exploding interest in transition metal chalcogenides, sulfide minerals containing the dianion S2(2-), such as pyrite (FeS2), cattierite (CoS2), and vaesite (NiS2), have recently attracted much attention for potential applications in energy conversion and storage devices. However, the synthesis of the patronite structure (VS4, V(4+)(S2(2-))2) and its applications have not yet been clearly demonstrated because of experimental difficulties and the existence of nonstoichiometric phases. Herein, we report the synthesis of VS4 using a simple, facile hydrothermal method with a graphene oxide (GO) template and the characterization of the resulting material. Tests of various templates such as CNT, pyrene, perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA), and graphite led us to the conclusion that the graphitic layer plays a role in the nucleation during growth of VS4. Furthermore, the VS4/rGO hybrid was proved to be a promising functional material in energy storage devices.

Direct nitrogen fixation at the edges of graphene nanoplatelets as efficient electrocatalysts for energy conversion

Nitrogen fixation is essential for the synthesis of many important chemicals (e.g., fertilizers, explosives) and basic building blocks for all forms of life (e.g., nucleotides for DNA and RNA, amino acids for proteins). However, direct nitrogen fixation is challenging as nitrogen (N2) does not easily react with other chemicals. By dry ball-milling graphite with N2, we have discovered a simple, but versatile, scalable and eco-friendly, approach to direct fixation of N2 at the edges of graphene nanoplatelets (GnPs). The mechanochemical cracking of graphitic C−C bonds generated active carbon species that react directly with N2 to form five- and six-membered aromatic rings at the broken edges, leading to solution-processable edge-nitrogenated graphene nanoplatelets (NGnPs) with superb catalytic performance in both dye-sensitized solar cells and fuel cells to replace conventional Pt-based catalysts for energy conversion.

Metal-Free Ketjenblack Incorporated Nitrogen-Doped Carbon Sheets Derived from Gelatin as Oxygen Reduction Catalysts

Electrocatalysts facilitating oxygen reduction reaction (ORR) are vital components in advanced fuel cells and metal-air batteries. Here we report Ketjenblack incorporated nitrogen-doped carbon sheets derived from gelatin and apply these easily scalable materials as metal-free electrocatalysts for ORR. These carbon nanosheets demonstrate highly comparable catalytic activity for ORR as well as better durability than commercial Vulcan carbon supported Pt catalysts in alkaline media. Physico-chemical characterization and theoretical calculations suggest that proper combination of graphitic and pyridinic nitrogen species with more exposed edge sites effectively facilitates a formation of superoxide, [O2(ad)](-), via one-electron transfer, thus increasing catalytic activities for ORR. Our results demonstrate a novel strategy to expose more nitrogen doped edge sites by irregular stacked small sheets in developing better electrocatalysts for Zn-air batteries. These desirable architectures are embodied by an amphiphlilic gelatin mediated compatible synthetic strategy between hydrophobic carbon and aqueous water.

An efficient and pH-universal ruthenium-based catalyst for the hydrogen evolution reaction

The hydrogen evolution reaction (HER) is a crucial step in electrochemical water splitting and demands an efficient, durable and cheap catalyst if it is to succeed in real applications. For an energy-efficient HER, a catalyst must be able to trigger proton reduction with minimal overpotential and have fast kinetics. The most efficient catalysts in acidic media are platinum-based, as the strength of the Pt-H bond is associated with the fastest reaction rate for the HER. The use of platinum, however, raises issues linked to cost and stability in non-acidic media. Recently, non-precious-metal-based catalysts have been reported, but these are susceptible to acid corrosion and are typically much inferior to Pt-based catalysts, exhibiting higher overpotentials and lower stability. As a cheaper alternative to platinum, ruthenium possesses a similar bond strength with hydrogen (∼65 kcal mol-1), but has never been studied as a viable alternative for a HER catalyst. Here, we report a Ru-based catalyst for the HER that can operate both in acidic and alkaline media. Our catalyst is made of Ru nanoparticles dispersed within a nitrogenated holey two-dimensional carbon structure (Ru@C2N). The Ru@C2N electrocatalyst exhibits high turnover frequencies at 25 mV (0.67 H2 s-1 in 0.5 M H2SO4 solution; 0.75 H2 s-1 in 1.0 M KOH solution) and small overpotentials at 10 mA cm-2 (13.5 mV in 0.5 M H2SO4 solution; 17.0 mV in 1.0 M KOH solution) as well as superior stability in both acidic and alkaline media. These performances are comparable to, or even better than, the Pt/C catalyst for the HER.

Oxygen-induced p-type doping of a long individual single-walled carbon nanotube

The effect of oxygen adsorption on a nanotube-based field effect transistor have been controversial as to whether it induces p-type doping of the nanotube body or the work function increase in the metal electrode. Here we report a transport measurement showing that a long individual single-walled nanotube can be doped as p-type upon oxygen adsorption. We discuss that, despite the fact that the charge transfer between the nanotube and O2 adsorbator has not been agreed to date, the effect of oxygen adsorption should still be interpreted as inducing p-type doping in the nanotube body. The n-type doping by NH3 adsorption is also measured for the purpose of comparison. Based on these observations, we suggest that, while the Schottky barrier management could be more effective for the transistor with a short nanotube, the doping effect could be more influential in devices with longer nanotubes.

Development of Double-Perovskite Compounds as Cathode Materials for Low-Temperature Solid Oxide Fuel Cells

A class of double-perovskite compounds display fast oxygen ion diffusion and high catalytic activity toward oxygen reduction while maintaining excellent compatibility with the electrolyte. The astoundingly extended stability of NdBa(1-x)Ca(x)Co2O(5+δ) (NBCaCO) under both air and CO2-containing atmosphere is reported along with excellent electrochemical performance by only Ca doping into the A site of NdBaCo2O(5+δ) (NBCO). The enhanced stability can be ascribed to both the increased electron affinity of mobile oxygen species with Ca, determined through density functional theory calculations and the increased redox stability from the coulometric titration.

Large-Area Graphene Films by Simple Solution Casting of Edge-Selectively Functionalized Graphite

We report edge-selective functionalization of graphite (EFG) for the production of large-area uniform graphene films by simply solution-casting EFG dispersions in dichloromethane on silicon oxide substrates, followed by annealing. The resultant graphene films show ambipolar transport properties with sheet resistances of 0.52-3.11 kΩ/sq at 63-90% optical transmittance. EFG allows solution processing methods for the scalable production of electrically conductive, optically transparent, and mechanically robust flexible graphene films for use in practice.