Nora Valentinyi

Evaluation of microalgae-based biorefinery alternatives

Microalgae-based biorefineries for the production of renewable biofuels like biodiesel, upgraded bio-oil, biochar, biogas and other high-value chemicals have received great attention in recent decades as potential major sources of energy for the future. Microalgae are a suitable species to produce biodiesel and other high energy density by-products; however, it is questionable whether a net energy gain can be realized or not considering the whole processing chain. In the present study, the energy balances of different algae-based biofuel and bioenergy production technologies are investigated in detail and compared to each other corresponding to a cradle-to-grave overall energetic analysis. The study includes cultivation, harvesting, cell pretreatments (cell disruption, drying, grinding), lipid extraction, transesterification, gasification and hydrothermal liquefaction with bio-oil stabilization and hydroprocessing. The energy consumption and energy gain are estimated for each operational step to determine the net energy ratio (NER, energy output over energy input) for the overall technologies studied. Our detailed investigation enables to detect the most energy consuming unit operation, that is, the bottleneck point(s) of the microalgae-based technologies which should be still improved in the future for the sake of more efficient algae-based biorefineries. The investigation makes also possible to evaluate and compare the different large scale alternatives for biomass transformation. Positive energy balances with a NER value of 1.109 and 1.137 are found in two already existing processes: open raceway ponds and closed photobioreactors, respectively. Our work gives also a detailed algorithm that can be followed at the evaluation of other microalgae-based biorefineries.

COD reduction of process wastewater with vacuum evaporation

Abstract Washing detergents in process wastewaters from fine chemical industry produce high Chemical Oxygen Demand (COD), which poses a serious environmental problem. Method has to be found, which follows the principles of circular economy so that the treated water can be recycled or reused. Heat pump vacuum evaporator is evaluated in order to reduce the Chemical Oxygen Demand of process wastewater with washing detergent content from initial 7500 mg O2/L to a lower value below the effluent limit , which is 1000 mg O2/L. Yield and COD rejection are determined for the evaluation of selected treatment. Experiments are investigated with LED Italia R150-v3 pilot apparatus. Different evaporation pressures were applied during measurements. It The highest removal or reduction of in the Chemical Oxygen Demand was reached certainly using the lowest possible pressure, which is 40 mbar.

Treatment of Pharmaceutical Process Wastewater with Hybrid Separation Method: Distillation and Hydrophilic Pervaporation

Abstract The work is motivated by an industrial problem, which is alcohol removal from pharmaceutical process wastewater. The aim of the study was to develop a complete hybrid operation is investigated. Ethanol dehydration, in combination with distillation and hydrophilic pervaporation, is used to investigate about the extent of separation of the ethanol-water mixture. The aim of this research is to rigorously model and optimize this hybrid operation in professional flowsheet simulator environment. The number of minimal theoretical plates of distillation column and minimal effective membrane transfer area are determined. Cost estimation is also examined according to Douglas methodology. Considering our results it can be concluded that, the distillation and hydrophilic pervaporation processes are suitable for separation ethanol and water in 99.5 weight percent purity

Parameter estimation for modelling of organophilic pervaporation

Abstract The work is motivated by an industrial environmental problem, which is ethanol removal from aqueous mixture. To complete this goal organophilic pervaporation of ethanol/water mixture through commercially available Sulzer PERVAP™ 4060 is investigated to obtain information about the removal of ethanol. The experimental results are obtained at different feed ethanol concentrations and temperatures. Our experimental data are evaluated with the semi-empirical pervaporation model (Valentinyi et al. 2013) of our improvement and it is found that the model can be applied also for this organophilic case. Linear and quadratic surfaces suiting (Model III) are also investigated in order to estimate partial permeate flux. The results of parameter estimation and modelling of the pervaporation show that the novel model that considers the concentration dependency of the transport coefficient (Model II) is also capable for the modelling of organophilic pervaporation and results in a better fit to the experimental data, than basic pervaporation model (Model I) and Model III.