Norbert Pütz

The liquid overlay technique is the key to formation of co-culture spheroids consisting of primary osteoblasts, fibroblasts and endothelial cells.

BACKGROUND AIMS The 3-dimensional (3-D) culture of various cell types reflects the in vivo situation more precisely than 2-dimensional (2-D) cell culture techniques. Spheroids as 3-D cell constructs have been used in tumor research for a long time. They have also been used to study angiogenic mechanisms, which are essential for the success of many tissue-engineering approaches. Several methods of forming spheroids are known, but there is a lack of systematic studies evaluating the performance of these techniques. METHODS We evaluated the performance of the hanging drop technique, carboxymethyl cellulose technique and liquid overlay technique to form both mono- and co-culture spheroids consisting of primary osteoblasts, fibroblasts and endothelial cells. The performance of the three techniques was evaluated in terms of rate of yield and reproducibility. The size of the generated spheroids was determined systematically. RESULTS The liquid overlay technique was the most suitable for generating spheroids reproducibly. The rate of yield for this technique was between 60% and 100% for monoculture spheroids and 100% for co-culture spheroids. The size of the spheroids could be adjusted easily and precisely by varying the number of seeded cells organized in one spheroid. The formation of co-culture spheroids consisting of three different cell types was possible. CONCLUSIONS Our results show that the most suitable technique for forming spheroids can vary from the chosen cell type, especially if primary cells are used. Co-culture spheroids consisting of three different cell types will be used to study angiogenic phenomena in further studies.

Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell-surface interactions which play a major role in the restenosis. In this current study, 316 LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.

The surface topography of the choroid plexus. Environmental, low and high vacuum scanning electron microscopy

Environmental scanning electron microscopy (ESEM) allows the examination of hydrated and dried specimens without a conductive metal coating which could be advantageous in the imaging of biological and medical objects. The aim of this study was to assess the performance and benefits of wet-mode and low vacuum ESEM in comparison to high vacuum scanning electron microscopy (SEM) using the choroid plexus of chicken embryos as a model, an organ of the brain involved in the formation of cerebrospinal fluid in vertebrates. Specimens were fixed with or without heavy metals and examined directly or after critical point drying with or without metal coating. For wet mode ESEM freshly excised specimens without any pre-treatment were also examined. Conventional high vacuum SEM revealed the characteristic morphology of the choroid plexus cells at a high resolution and served as reference. With low vacuum ESEM of dried but uncoated samples the structure appeared well preserved but charging was a problem. It could be reduced by a short beam dwell time and averaging of images or by using the backscattered electron detector instead of the gaseous secondary electron detector. However, resolution was lower than with conventional SEM. Wet mode imaging was only possible with tissue that had been stabilized by fixation. Not all surface details (e.g. microvilli) could be visualized and other structures, like the cilia, were deformed. In summary, ESEM is an additional option for the imaging of bio-medical samples but it is problematic with regard to resolution and sample stability during imaging.

Expansion and differentiation of human primary osteoblasts in two- and three-dimensional culture.

Abstract Despite the regenerative capability of bone, treatment of large defects often requires bone grafts. The challenge for bone grafting is to establish rapid and sufficient vascularization. Three-dimensional (3D) multicellular spheroids consisting of the relevant cell types can be used as “mini tissues” to study the complexity of angiogenesis. We investigated two-dimensional (2D) expansion, differentiation and characterization of primary osteoblasts as steps toward the establishment of 3D multicellular spheroids. Supplementation of cell culture medium with vitamin D3 induces the osteocalcin expression of osteoblasts. An increased osteocalcin concentration of 10.8 ± 0.58 ng/ml could be measured after 19 days in supplemented medium. Vitamin D3 has no influence on the expression of alkaline phosphatase or the deposition of calcium. Expression of these additional osteogenic markers requires addition of a cocktail of osteogenic factors that, conversely, have no influence on the expression of osteocalcin. Supplementation of the cell culture medium with both vitamin D3 and a cocktail of osteogenic factors is recommended to produce an osteoblast phenotype that secretes osteocalcin, expresses alkaline phosphatase and deposits calcium. In such a supplemented medium, a mean osteocalcin concentration of 11.63 ± 4.85 ng/ml was secreted by the osteoblasts. Distinguishing osteoblasts and fibroblasts remains a challenge. Neither differentiated nor undifferentiated osteoblasts can be distinguished from fibroblasts by the expression of CD90, ED-A-fibronectin or α-smooth muscle actin; however, these cell types exhibit clear differences in their growth characteristics. Osteoblasts can be arranged as 3D spheroids by coating the bottom of the cell culture device with agarose. The cellular composition of 3D multicellular spheroids can be evaluated quantitatively using vital fluorescence labeling techniques. Spheroids are a promising tool for studying angiogenic and osteogenic phenomena in vivo and in vitro.

Poly(amidoamine)-alginate hydrogels: directing the behavior of mesenchymal stem cells with charged hydrogel surfaces

AbstractThe surface charge of a biomaterial represents a promising tool to direct cellular behavior, which is crucial for therapeutic approaches in regenerative medicine. To expand the understanding of how the material surface charge affects protein adsorption and mesenchymal stem cell behavior, differently charged surfaces with zeta potentials spanning from −25 mV to +15 mV were fabricated by the conjugation of poly(amidoamine) to alginate-based hydrogels. We showed that the increase of the biomaterials surface charge resulted in enhanced quantities of biologically available, surface-attached proteins. Since different surface charges were equalized after protein adsorption, mesenchymal stem cells interacted rather with diverse protein compositions instead of different surface features. Besides an enhanced cell attachment to increasingly positively charged surfaces, the cell spreading area and the expression of adhesion-related genes integrin α5 and tensin 1 were found to be increased after adhesion. Moreover, first results indicate a potential impact of the surface charge on mesenchymal stem cell differentiation towards bone and fat cells. The improved understanding of surface charge-related cell behavior has significant impact on the design of biomedical devices and artificial organs.