Noriyuki Kitai

Shear bond strength of orthodontic brackets bonded with different self-etching adhesives

INTRODUCTION The purpose of this study was to compare the shear bond strength (SBS) of orthodontic brackets bonded with 4 self-etching adhesives. METHODS A total of 175 extracted premolars were randomly divided into 5 groups (n = 35). Group I was the control, in which the enamel was etched with 37% phosphoric acid, and stainless steel brackets were bonded with Transbond XT (3M Unitek, Monrovia, Calif). In the remaining 4 groups, the enamel was conditioned with the following self-etching primers and adhesives: group II, Transbond Plus and Transbond XT (3M Unitek); group III, Clearfil Mega Bond FA and Kurasper F (Kuraray Medical, Tokyo, Japan); group IV, Primers A and B, and BeautyOrtho Bond (Shofu, Kyoto, Japan); and group V, AdheSE and Heliosit Orthodontic (Ivoclar Vivadent AG, Liechtenstein). The teeth were stored in distilled water at 37 degrees C for 24 hours and debonded with a universal testing machine. The adhesive remnant index (ARI) including enamel fracture score was also evaluated. Additionally, the conditioned enamel surfaces were observed under a scanning electron microscope. RESULTS The SBS values of groups I (19.0 +/- 6.7 MPa) and II (16.6 +/- 7.3 MPa) were significantly higher than those of groups III (11.0 +/- 3.9 MPa), IV (10.1 +/- 3.7 MPa), and V (11.8 +/- 3.5 MPa). Fluoride-releasing adhesives (Kurasper F and BeautyOrtho Bond) showed clinically acceptable SBS values. Significant differences were found in the ARI and enamel fracture scores between groups I and II. CONCLUSIONS The 4 self-etching adhesives yielded SBS values higher than the bond strength (5.9 to 7.8 MPa) suggested for routine clinical treatment, indicating that orthodontic brackets can be successfully bonded with any of these self-etching adhesives.

Human Masticatory Muscle Volume and Zygomatico-mandibular Form in Adults with Mandibular Prognathism

Although several investigators have reported associations between masticatory muscles and skeletal craniofacial form, there is no agreement on the association. We tested the hypothesis that masticatory muscle volume correlates with the size and form of the adjacent local skeletal sites. For this purpose, we investigated the morphological association of the cross-sectional area and volume of temporal and masseter muscles with zygomatico-mandibular skeletal structures using computerized tomography (CT) in 25 male adults with mandibular prognathism. Muscle variables significantly correlated with widths of the bizygomatic arch and temporal fossa but not with the cranium width. Masseter volume significantly correlated with cross-sectional areas of the zygomatic arch and mandibular ramus. Masseter orientation was almost perpendicular to the zygomatic arch and mandibular antegonial region. The zygomatic arch angle significantly correlated with the antegonial angle. The results of the study suggest that the masticatory muscles exert influence on the adjacent local skeletal sites.

Spatial relationships between the mandibular central incisor and associated alveolar bone in adults with mandibular prognathism.

OBJECTIVE To examine if there was any correlation between the labio-lingual inclinations of the mandibular central incisor and the associated alveolar bone, and to investigate the labio-lingual position of the mandibular central incisor root apex in the associated cancellous bone in adults with untreated mandibular prognathism. MATERIALS AND METHODS High-resolution computed tomography images of the mandible were recorded in 20 adult patients with mandibular prognathism. The labio-lingual inclinations of a central incisor and its associated alveolar bone, the thickness of the associated cancellous bone, and the distance from the central incisor root apex to the inner contour of both the labial and lingual cortical plates were measured. Correlations and differences between the measured variables were tested for statistical significance. RESULTS The labio-lingual inclination of the central incisor significantly correlated with the labio-lingual inclination of the associated alveolar bone, the thickness of cancellous bone, and the distance from the central incisor root apex to the inner contour of the lingual cortical bone. The distance from the central incisor root apex to the inner contour of the labial cortical plate of bone was significantly smaller than that to the lingual cortical plate. CONCLUSIONS In adults with untreated mandibular prognathism, when the mandibular central incisor was more lingually inclined, the associated alveolar bone was also more lingually inclined and thinner. The mandibular central incisor root apex was closer to the inner contour of the labial cortical bone than to the lingual cortical bone.

Volume and Shape of Masticatory Muscles in Patients With Hemifacial Microsomia

OBJECTIVE To test the following hypotheses in hemifacial microsomia (HFM): (1) the volumes of the masseter, lateral and medial pterygoid, and temporal muscles are reduced on the affected versus unaffected side; (2) significant differences exist between the degrees of right-left disproportion in these four masticatory muscles; (3) circumferential shapes of the masticatory muscles are more irregular on the affected versus unaffected side; and (4) the degree of masticatory muscle right-left disproportion can be judged by the degree of ear, mandibular, or dental anomalies. SUBJECTS AND METHODS Ten preadolescent patients with HFM were studied using facial photographs, dental casts, cephalometric and panoramic radiographs, and helical computed tomography scanning and three-dimensional reconstruction technique. Volumes of masseter, lateral and medial pterygoid, and temporal muscles on both sides were measured. Muscle volume disproportion was expressed as the affected/unaffected ratio. Muscle circumferential irregularity was expressed as the ratio between the total circumferential length and corresponding cross-sectional area. RESULTS Masticatory muscle volumes were significantly smaller on the affected versus unaffected side. No significant differences were observed between the degrees of disproportion of the four masticatory muscles examined. Circumferential shapes of masticatory muscles were significantly more irregular on the affected versus unaffected side. There were no significant relationships of the degree of ear, mandibular, or dental anomalies in relation to masticatory muscle disproportion. CONCLUSIONS In HFM the masseter, lateral and medial pterygoid, and temporal muscles all have a significantly smaller volume on the affected versus unaffected side, and specific muscles were not severely affected in the present subjects. Furthermore, all four muscles showed a significantly more irregular shape on the affected versus unaffected side. Finally, the severity of masticatory muscle disproportion can probably not be judged by the degree of ear, mandibular, and dental anomalies in preadolescent patients with HFM.

Localization and function of the accessory protein Mfa3 in Porphyromonas gingivalis Mfa1 fimbriae.

The fimbriae of Porphyromonas gingivalis, the causative agent of periodontitis, have been implicated in various aspects of pathogenicity, such as colonization, adhesion and aggregation. Porphyromonas gingivalis ATCC 33277 has two adhesins comprised of the FimA and Mfa1 fimbriae. We characterized the PGN0289 (Mfa3) protein, which is one of the three accessory proteins of Mfa1 fimbriae in P. gingivalis. The Mfa3 protein was present in two different sizes, 40 and 43 kDa, in the cell. The 43-kDa and 40-kDa Mfa3 were detected largely in the inner membrane and the outer membrane, respectively. Purified Mfa1 fimbriae contained the 40-kDa Mfa3 alone. Furthermore, the 40-kDa Mfa3 started with the Ala(44) residue of the deduced amino acid sequence, indicating that the N-terminal region of the nascent protein expressed from the mfa3 gene is processed in the transport step from the inner membrane into fimbriae. Immuno-electron microscopy revealed that Mfa3 localized at the tip of the fimbrial shaft. Interestingly, deletion of the mfa3 gene resulted in the absence of other accessory proteins, PGN0290 and PGN0291, in the purified Mfa1 fimbriae, suggesting that Mfa3 is required for integration of PGN0290 and PGN0291 into fimbriae. A double mutant of mfa3 and fimA genes (phenotype Mfa1 plus, FimA minus) showed increased auto-aggregation and biofilm formation similar to a double mutant of mfa1 and fimA genes (phenotype Mfa1(-) , FimA(-) ). These findings suggest that the tip protein Mfa3 of the Mfa1 fimbriae may function in the integration of accessory proteins and in the colonization of P. gingivalis.

Three-Dimensional Magnetic Resonance Image of the Mandible and Masticatory Muscles in a Case of Juvenile Chronic Arthritis Treated With the Herbst Appliance

The present report documents, in a case of juvenile chronic arthritis (JCA) with mandibular retrognathia, three-dimensional (3D) changes in the mandible and the relationship between the mandible and the masticatory muscles resulting from treatment with the Herbst appliance after cessation of growth. Magnetic resonance scanning of the whole head was carried out before and after treatment. The mandible, the masseter, and the medial and lateral pterygoid muscles were segmented bilaterally and reconstructed in 3D for both stages. Superimposition of the datasets was carried out according to anatomical structures in the brain (cranial base). Mandibular superimposition was performed according to the mandibular symphysis and the lower mandibular border. The mandible moved forward and downward relative to the anterior cranial base. In addition, bone apposition was observed at the superior and posterior surfaces of both mandibular condyles and at the roof of the glenoid fossa. The masticatory muscles remained relatively stable in position in relation to the anterior cranial base. To our knowledge, such information in JCA patients has not previously been published in the literature. Using magnetic resonance imaging (MRI), it was possible to gain improved insight into the 3D morphology including soft tissues without the overlap of the surrounding tissues observed in the conventional radiographs. Accordingly, it is suggested that 3D magnetic resonance analysis is a more useful method for the follow-up of the JCA patients than radiographic techniques.

Rigid external distraction osteogenesis for a patient with maxillary hypoplasia and oligodontia.

OBJECTIVE In this report, the orthodontic treatment combined with rigid external distraction osteogenesis in a 5.5-year-old girl with midfacial hypoplasia and oligodontia is described. PATIENT The child presented with a reduced maxilla, protruding lower lip, skeletal Class III jaw relationship with a low mandibular plane angle, a short and flattened nose, anterior crossbite, and aplasia of 16 permanent teeth. The patient was treated with rigid external maxillary distraction osteogenesis, maxillary protraction headgear, and Class III elastics. Following treatment, the maxilla was displaced in a forward direction with new bone formation at the tuberosities and the mandible rotated backward in relation to the anterior cranial base. The anterior crossbite was corrected, and the skeletal jaw relationship changed from a Class III to a Class I skeletal pattern. The soft tissue facial profile showed that the nasal projection had been increased, the nasolabial angle increased, and the lower lip protrusion was reduced. Postoperative treatment results were acceptable. CONCLUSION This report documents that early maxillary advancement with rigid external osteogenesis offers a promising treatment alternative for a very young patient with maxillary hypoplasia and oligodontia.

Dual Segmental Distraction Osteogenesis of the Midface in a Patient With Apert Syndrome

Objective To present orthodontic treatment combined with dual segmental distraction osteogenesis in a patient with Apert syndrome. Patient A 15-year-old boy exhibited severe midfacial hypoplasia with retruded and hypoplastic maxilla and anterior open bite. The patient was treated with a rigid external distraction II system for distraction osteogenesis, a preadjusted edgewise appliance, and a modified maxillary protraction headgear. The concave profile with midfacial hypoplasia was improved. A tight occlusal relationship between maxillary and mandibular teeth was achieved. Postoperative treatment results have been stable for 1 year.

Measurement accuracy with a new dental panoramic radiographic technique based on tomosynthesis

OBJECTIVE To investigate measurement errors and head positioning effects on radiographs made with new dental panoramic radiograph equipment that uses tomosynthesis. MATERIALS AND METHODS Radiographic images of a simulated human head or phantom were made at standard head positions using the new dental panoramic radiograph equipment. Measurement errors were evaluated by comparing with the true values. The phantom was also radiographed at various alternative head positions. Significant differences between measurement values at standard and alternative head positions were evaluated. Magnification ratios of the dimensions at standard and alternative head positions were calculated. RESULTS The measurement errors were small for all dimensions. On the measurements at 4-mm displacement positions, no dimension was significantly different from the standard value, and all dimensions were within ±5% of the standard values. At 12-mm displacement positions, the magnification ratios for tooth length and mandibular ramus height were within ±5% of the standard values, but those for dental arch width, mandibular width, and mandibular body length were beyond ±5% of the standard values. CONCLUSIONS Measurement errors on radiographs made using the new panoramic radiograph equipment were small in any direction. At 4-mm head displacement positions, no head positioning effect on the measurements was found. At 12-mm head displacement positions, the measurements for vertical dimensions were little affected by head positioning, while those for lateral and anteroposterior dimensions were strongly affected.

Report of a Patient With Hypoglossia-Hypodactylia Syndrome and a Review of the Literature

OBJECTIVE To present the morphology of the extremities, craniofacial structures, and the oral cavity based on roentgencephalometry and three-dimensional computed tomography and magnetic resonance imaging scanning in a patient with hypoglossia-hypodactylia syndrome, discuss the orthodontic treatment method, and review the literature for the syndrome. PATIENT The patient was a 6-year-old boy diagnosed with hypoglossia-hypodactylia syndrome at birth. He had hypodactylia as well as micrognathia with steep inclination of the anterior surface of the mandible in relation to the lower mandibular plane. He had missing mandibular incisors with concomitant bone defect limited to the associated alveolar ridge and an absence of any malformations in the mandibular ramus and condylar head. The patient had a bilateral scissors bite with an extremely constricted mandibular dental arch, skeletal Class II jaw relationship with an average mandibular plane angle and maxillary incisors inclined palatally. He had extremely reduced tongue size and hypertrophy of the floor of the mouth. Anomalies of the central nervous system were not observed. There was no evidence of hearing loss.