Norma Alcantar

Removing Heavy Metals in Water: The Interaction of Cactus Mucilage and Arsenate (As (V))

High concentrations of arsenic in groundwater continue to present health threats to millions of consumers worldwide. Particularly, affected communities in the developing world need accessible technologies for arsenic removal from drinking water. We explore the application of cactus mucilage, pectic polysaccharide extracts from Opuntia ficus-indica for arsenic removal. Synthetic arsenate (As (V)) solutions were treated with two extracts, a gelling extract (GE) and a nongelling extract (NE) in batch trials. The arsenic concentration at the air-water interface was measured after equilibration. The GE and NE treated solutions showed on average 14% and 9% increases in arsenic concentration at the air-water interface respectively indicating that the mucilage bonded and transported the arsenic to the air-water interface. FTIR studies showed that the -CO groups (carboxyl and carbonyl groups) and -OH (hydroxyl) functional groups of the mucilage were involved in the interaction with the arsenate. Mucilage activity was greater in weakly basic (pH 9) and weakly acidic (pH 5.5) pH. This interaction can be optimized and harnessed for the removal of arsenic from drinking water. This work breaks the ground for the application of natural pectic materials to the removal of anionic metallic species from water.

Experimental investigation of the dissolution of quartz by a muscovite mica surface : Implications for pressure solution

Using the surface forces apparatus, which can measure small changes in thickness occurring even at essentially geological timescales, we have measured dissolution of quartz sheets when pressed against muscovite mica surfaces in aqueous electrolyte solution, but no dissolution is observed under dry conditions. It is postulated that the dissolved quartz may reprecipitate outside the contact junction as a fragile silica gel, which could be the main factor limiting the rate of further dissolution.

Removal of sediment and bacteria from water using green chemistry.

Although nearly all newly derived water purification methods have improved the water quality in developing countries, few have been accepted and maintained for long-term use. Field studies indicate that the most beneficial methods use indigenous resources, as they are both accessible and accepted by communities they help. In an effort to implement a material that will meet community needs, two fractions of mucilage gum were extracted from the Opuntia ficus-indica cactus and tested as flocculation agents against sediment and bacterial contamination. As diatomic ions are known to affect both mucilage and promote cell aggregation, CaCl(2) was studied in conjunction and compared with mucilage as a bacteria removal method. To evaluate performance, ion-rich waters that mimic natural water bodies were prepared. Column tests containing suspensions of the sediment kaolin exhibited particle flocculation and settling rates up to 13.2 cm/min with mucilage versus control settling rates of 0.5 cm/min. Bacillus cereus tests displayed flocculation and improved settling times with mucilage concentrations lower than 5 ppm and removal rates between 97 and 98% were observed for high bacteria concentration tests (>10(8) cells/ml). This natural material not only displays water purification abilities, but it is also affordable, renewable and readily available.

Combining Ferric Salt and Cactus Mucilage for Arsenic Removal from Water

New methods to remediate arsenic-contaminated water continue to be studied, particularly to fill the need for accessible methods that can significantly impact developing communities. A combination of cactus mucilage and ferric (Fe(III)) salt was investigated as a flocculation-coagulation system to remove arsenic (As) from water. As(V) solutions, ferric nitrate, and mucilage suspensions were mixed and left to stand for various periods of time. Visual and SEM observations confirmed the flocculation action of the mucilage as visible flocs formed and settled to the bottom of the tubes within 3 min. The colloidal suspensions without mucilage were stable for up to 1 week. Sample aliquots were tested for dissolved and total arsenic by ICP-MS and HGAFS. Mucilage treatment improved As removal (over Fe(III)-only treatment); the system removed 75-96% As in 30 min. At neutral pH, removal was dependent on Fe(III) and mucilage concentration and the age of the Fe(III) solution. The process is fast, achieving maximum removal in 30 min, with the majority of As removed in 10-15 min. Standard jar tests with 1000 μg/L As(III) showed that arsenic removal and settling rates were pH-dependent; As removal was between 52% (high pH) and 66% (low pH).

Parameters Influencing the Photocatalytic Degradation of Geosmin and 2-Methylisoborneol Utilizing Immobilized TiO2

Geosmin and 2-methylisoborneol (MIB) are taste and odor compounds that negatively impact potable water and freshwater aquaculture species. Conventional water treatment methods are generally ineffective for the removal of these compounds. Prior studies using TiO2 photocatalysts have shown promising results, but are primarily limited to laboratory scale batch slurry systems. Immobilization of TiO2 is essential for the effective scale-up and conversion to a flow through system. In this study, the degradation of MIB and geosmin from laboratory spiked and naturally tainted water samples was demonstrated utilizing an immobilized TiO2 photocatalyst. The benefits of TiO2 photocatalysis, in comparison to photolysis, are discussed. Further, the influence of pH on the degradation rates was analyzed to optimize process location in an aquaculture production facility. Geosmin degradation reached a maximum near a pH of 6. While MIB degradation is highest at low pH, there is an inflection in this trend above the pH at which TiO2 has a zero surface charge. Photocatalytic processing is recommended to occur after nitrification and before base addition to maximize MIB and geosmin removal rates. The findings of this work have been incorporated into a larger project, which assesses the continuous operation of TiO2 photocatalyst in a recirculating aquaculture system.Graphical Abstract

The Mexican Cactus as a New Environmentally Benign Material for the Removal of Contaminants in Drinking Water

The use of natural environmentally benign agents in the treatment of drinking water is rapidly gaining interest due to their inherently renewable character and low toxicity. We show that the common Mexican cactus produces a gum-like substance, cactus mucilage, which shows flocculating abilities superior to the commonly used aluminum sulfate with respect to settling time and shows promise as a socially viable alternative for low-income communities. Cactus mucilage is a neutral mixture of approximately 55 high-molecular weight sugar residues composed basically of arabinose, galactose, rhamnose, xylose, and galacturonic acid. We show how this natural product was characterized for its use as a flocculating agent. Our results show the mucilage efficiency for reducing arsenic and particulates from drinking water as determined by light scattering, Atomic Absorption and Hydride Generation-Atomic Fluorescence Spectroscopy. Flocculation studies proved the mucilage to be a much faster flocculating agent when compared to Al2(SO4)3 with the efficiency increasing with mucilage concentration. Jar tests revealed that lower concentrations of mucilage provided the optimal effectiveness for supernatant clarity, an important factor in determining the potability of water. Initial filter results with the mucilage embedded in a silica matrix prove the feasibility of applying this technology as a method for heavy metal removal. This project provides fundamental, quantitative insights into the necessary and minimum requirements for natural flocculating agents that are innovative, environmentally benign, and cost-effective.

Inhibition of heparin precipitation, bacterial growth, and fungal growth with a combined isopropanol–ethanol locking solution for vascular access devices

BACKGROUND Clinical reports of ethanol-lock use for the prevention of catheter-related bloodstream infections have been marked by the occurrence of serious catheter occlusions, particularly among children with mediports. We hypothesized that precipitate forms when ethanol mixes with heparin at the concentrations relevant for vascular access devices, but that the use of a combination of two alcohols, ethanol and isopropanol, would diminish heparin-related precipitation, while retaining anti-bacterial and anti-fungal effects. METHODS Heparin (0-100units/mL) was incubated in ethanol-water solutions (30%-70% vol/vol) or in an aqueous solution containing equal parts (35% and 35% vol/vol) of isopropanol and ethanol. Precipitation at temperatures from 4 to 40°C was measured in nephelometric turbidity units using a benchtop turbidimeter. Growth of Escherichia coli, Staphylococcus aureus, and Candida albicans colonies were measured following exposure to solutions of ethanol or isopropanol-ethanol. Groupwise comparisons were performed using analysis of variance with Bonferroni-corrected, post-hoc T-testing. RESULTS Seventy percent ethanol and heparin exhibit dose-dependent precipitation that is pronounced and significant at the concentrations typically used in mediports (p<0.05). Precipitate is significantly reduced by use of a combined 35% isopropanol-35% ethanol solution rather than 70% ethanol (p<0.05), while maintaining the solutions anti-bacterial and anti-fungal properties. On the other hand, although ethanol solutions under 70% form less precipitate with heparin, such concentrations are also less effective at bacterial colony inhibition than solutions of either 70% ethanol or 35% isopropanol-35% ethanol (p<0.05). CONCLUSIONS A combined 35% isopropanol-35% ethanol locking solution inhibits bacterial and fungal growth similarly to 70% ethanol, but results in less precipitate than 70% ethanol when exposed to heparin. Further study of a combined isopropanol-ethanol locking solution for the prevention of catheter-related bloodstream infections should focus on the determination as to whether such a locking solution may reduce the rate of precipitation-related catheter occlusion, and whether it may be administered with low systemic toxicity.

Controlled release niosome embedded chitosan system: Effect of crosslink mesh dimensions on drug release†

We report on a model chemotherapy drug delivery system comprising nonionic surfactant vesicles (niosomes) packaged within a temperature-sensitive chitosan network. This smart packaging, or package-within-a package system, provides two distinct advantages. First, the gel prevents circulation of the niosomes and maintains delivery in the vicinity of a tumor. Second, the chitosan network protects the niosomes against fluctuations in tonicity, which affects delivery rates. Tonicity is the sum of the concentrations of the solutes which have the capacity to exert an osmotic force across the membrane. All release rate experiments were conducted with 5,6-carboxyfluorescein, a fluorescent dye. Release rates were monitored from both bare niosomes alone and niosome-embedded, chitosan networks. It was observed that chitosan networks prolonged delivery from 100 h to 55 days in low ionic strength environment and pH conditions similar to a tumor site. The primary effect of chitosan is to add control on release time and dosage, and stabilize the niosomes through a high ionic strength surrounding that prevents uncontrolled bursting of the niosomes. Secondary factors include crosslink density of the chitosan network, molecular weight of the individual chitosan polymers, dye concentration within the niosomes, and the number density of niosomes packaged within the chitosan network. Each of these factors can be altered to fine-tune release rates.

A Cell ELISA for the quantification of MUC1 mucin (CD227) expressed by cancer cells of epithelial and neuroectodermal origin

Quantitative analysis of MUC1, a cell membrane associated mucin, expressed by intact cells of epithelial origin previously has been limited to flow cytometry, which requires using large quantities of cells and antibodies. Here, for the first time, we report the development of a novel Cellular-based Enzyme Linked Immunosorbent Assay (Cell ELISA) to quantify the expression of MUC1 by cell lines of epithelial and neuroectodermal origin using an antibody recognizing a specific tandem repeat found in the extracellular domain of MUC1. In contrast to flow cytometry, this method requires a much lower number of cells. We report here the results obtained from two variants of this Cell ELISA in live and fixed cells. We found that the Cell ELISA in live cells was not sensitive enough to detect a difference in MUC1 levels between the normal cells and tumor cells. However, we found that Cell ELISA in fixed cells followed by whole cell staining was a dependable method of MUC1 level detection in the normal and tumor cells showing significantly higher levels of MUC1 receptor in the tumor cells when compared to the normal controls. Therefore, we conclude that the Cell ELISA in fixed cells is an efficient method for quantifying the expression of MUC1 by epithelial and neuroectodermal cancer cell lines.

Abstract 3677: Enhanced targeted delivery of paclitaxel to tumor cells of epithelial and neuroectodermal origin using chlorotoxin-chitosan nanodelivery system

We report a development of a novel localized nanodelivery system featuring an enhanced targeted and controlled paclitaxel (PTX) delivery to epithelial and neuroectodermal origin tumor cells. The presented drug delivery system consists of a chitosan hydrogel embedded with PTX loaded non-ionic surfactant vesicles (PTX-niosomes) and chlorotoxin (CTX). We found a higher accumulation of chitosan on the surface of ovarian epithelial carcinoma cells known to overexpress MUC1 antigen as compared to normal ovarian epithelial cells. We therefore hypothesized that besides serving as a localized drug delivery platform, chitosan hydrogel can actively target MUC1 overexpressing tumor cells. To further improve the tumor-specific delivery of PTX, we have incorporated CTX, a 36-amino acid peptide, which binds to tumor cells of neuroectodermal origin, but not to non-transformed cells. Using a High Performance Liquid Chromatography (HPLC) assay, we have measured the in-vitro release profiles of PTX from chitosan hydrogel embedded with PTX-niosomes and CTX. We have assessed the morphology of CTX and PTX-nisomes as well as chitosan hydrogel embedded with PTX-niosomes and CTX using Transmission Electron Microscopy (TEM). We have used Attenuated Total Reflectance-Fourier Transform Infra-Red (ATR-FTIR) spectroscopy to investigate the possible molecular interactions between chitosan hydrogel and various tumor cells. To better understand the mechanism involved in interactions between chitosan and specific tumor cells, we have developed a new Cell based Enzyme Linked Immunosorbent Assay (Cell ELISA) allowing us to quantify the expression level of MUC1 in epithelial and neuroectodermal origin tumor cells. Our Cell ELISA results revealed higher expression level of MUC1 (around 1.5 fold) in ovarian epithelial carcinoma cell line (OV2008) when compared to normal ovarian epithelial cell line (MCC3). The ATR-FTIR results showed a specific interaction of chitosan with OV2008 cells implying the mucoadhesive property of chitosan and its potential in targeting of MUC1 overexpressing tumor cells. We observed a sustained PTX release from chitosan hydrogel embedded with PTX-niosomes ( Citation Format: Rana Falahat, Eva Williams, Marzenna Wiranowska, Ryan Toomey, Norma Alcantar. Enhanced targeted delivery of paclitaxel to tumor cells of epithelial and neuroectodermal origin using chlorotoxin-chitosan nanodelivery system. [abstract]. In: Proceedings of the 106th Annual Meeting of the American Association for Cancer Research; 2015 Apr 18-22; Philadelphia, PA. Philadelphia (PA): AACR; Cancer Res 2015;75(15 Suppl):Abstract nr 3677. doi:10.1158/1538-7445.AM2015-3677