O. Farish

The excitation of UHF signals by partial discharges in GIS

The fundamental theory of the UHF method for detecting partial discharge (PD) in gas insulated substations (GIS) is presented. The effects of position, size, current amplitude and pulse shape of the PD source on the UHF signal can be predicted using this theory. Excitation of propagating electromagnetic waves by a PD current pulse within the coaxial waveguides formed by GIS components is explained by making use of dyadic Greens functions for the electric fields of propagating modes. Experiments with a coaxial test chamber are used to verify the theoretical predictions, and comparisons are made between measured and simulated UHF signals. Some implications for the UHF measurement of PD are discussed, together with positioning and sensitivity requirements for UHF couplers. A scheme is proposed for standardizing PD measurements made using the UHF technique.

Partial discharge diagnostics for gas insulated substations

A defect such as a free metallic particle or stress-raising edge on an electrode could lead to breakdown in a gas insulated substation (GIS), but may be detected by the partial discharges it generates. Of the various detection means available, most success has been achieved with either acoustic transducers to detect sound waves from the discharge, or electrical couplers to pick up the ultra-high-frequency (UHF) signals generated inside the GIS chambers. All new GIS in the UK are fitted with internal couplers for UHF monitoring, and two examples of continuous monitoring schemes on 400 kV GIS at nuclear power stations are described. Further developments, which are already well advanced, include specifying and measuring the coupler characteristics, making use of expert systems to interpret the UHF discharge data, and extending the monitoring system to include the performance of circuit breakers and other equipment. >

Inactivation of food-borne enteropathogenic bacteria and spoilage fungi using pulsed-light

The lethality of high-intensity pulsed-light emissions from low and high ultraviolet (UV) light sources on predetermined microbial populations has been investigated. Prior to treatment, the bacterial enteropathogens Bacillus cereus, Escherichia coli, and Salmonella enteritidis and the food-spoilage fungi Aspergillus niger and Fusarium culmorum were seeded separately onto the surface of either tryptone soya yeast extract or malt extract agar plates. Prescribed microbial population densities were applied to the test media and these samples were exposed to one of two light sources. These were low-pressure, xenon filled, flash lamps that produced either high or low UV intensities. They were operated in pulsed mode, being driven by a stacked Blurnlein table generator. Microbial samples were treated by exposure to different numbers of light pulses. The treated bacterial populations were reduced by /spl sim/8 log orders after 1000 light-pulses of the higher UV intensity light and the fungal counts had a corresponding reduction of 4.5 log orders. The fungus, Aspergillus niger, was shown to be significantly more resistant in spore form to the intense UV light compared with Fusarium culmorum. This resistance has been attributed to the high level of UV absorbance associated with the dark pigment present in A. niger. The pulsed light source of lower UV intensity was shown to be significantly less effective in reducing microbial populations.

Light inactivation of food‐related pathogenic bacteria using a pulsed power source

The effects of high intensity light emissions, produced by a novel pulsed power energization technique (PPET), on the survival of bacterial populations of verocytotoxigenic Escherichia coli (serotype 0157:H7) and Listeria monocytogenes (serotype 4b) were investigated. Using this PPET approach, many megawatts (MW) of peak electrical power were dissipated in the light source in an extremely short energization time (about 1 μs). The light source was subjected to electric field levels greater than could be achieved under conventional continuous operation, which led to a greater production of the shorter bacteriocidal wavelengths of light. In the exposure experiments, pre‐determined bacterial populations were spread onto the surface of Trypone Soya Yeast Extract Agar and were then treated to a series of light pulses (spectral range of 200–530 nm) with an exposure time ranging from 1 to 512 μs. While results showed that as few as 64 light pulses of 1 μs duration were required to reduce E. coli 0157:H7 populations by 99·9% and Listeria populations by 99%, the greater the number of light pulses the larger the reduction in cell numbers (P < 0·01). Cell populations of E. coli 0157:H7 and Listeria were reduced by as much as 6 and 7 log10 orders at the upper exposure level of 512 μs, respectively. Survival data revealed that E. coli 0157:H7 was less resistant to the lethal effects of radiation (P < 0·01). These studies have shown that pulsed light emissions can significantly reduce populations of E. coli 0157:H7 and L. monocytogenes on exposed surfaces with exposure times which are 4–6 orders of magnitude lower than those required using continuous u.v. light sources.

Dielectric windows for UHF partial discharge detection

Increasing the permittivity of the propagation medium inside a hollow tube lowers its cut-off frequency, allowing it to transmit a wider range of signal frequencies. This principle is applied to the design of dielectric windows that can be used to facilitate partial discharge (PD) detection at ultra high frequency (UHF) in a HV metalclad plant such as gas-insulated substation (GIS), power transformers and circuit breakers. External UHF couplers mounted on such windows can be removed or replaced without compromising the integrity of the insulation system. By increasing the signal power level incident on a window-mounted external UHF coupler, higher sensitivity to PD can be achieved. The problem is analyzed using waveguide theory and, using GIS as an example, improvements of /spl ap/6 dB are demonstrated by means of coupler sensitivity measurements and experiments using PD sources.

Inactivation of mycobacterium paratuberculosis by pulsed electric fields

ABSTRACT The influence of treatment temperature and pulsed electric fields (PEF) on the viability of Mycobacterium paratuberculosiscells suspended in 0.1% (wt/vol) peptone water and in sterilized cows milk was assessed by direct viable counts and by transmission electron microscopy (TEM). PEF treatment at 50°C (2,500 pulses at 30 kV/cm) reduced the level of viable M. paratuberculosis cells by approximately 5.3 and 5.9 log10 CFU/ml in 0.1% peptone water and in cows milk, respectively, while PEF treatment of M. paratuberculosisat lower temperatures resulted in less lethality. Heating alone at 50°C for 25 min or at 72°C for 25 s (extended high-temperature, short-time pasteurization) resulted in reductions ofM. paratuberculosis of approximately 0.01 and 2.4 log10 CFU/ml, respectively. TEM studies revealed that exposure to PEF treatment resulted in substantial damage at the cellular level to M. paratuberculosis.

Inactivation of pathogenic and spoilage microorganisms in a test liquid using pulsed electric fields

Experiments have been carried out to investigate the effect of pulsed electric fields (PEFs) on the inactivation of microbial populations suspended in liquids using nonflowing and continuous flowing test chambers. Electric fields of /spl sim/30 kV/cm, and a pulse duration of 500 ns, were generated from a coaxial table Blumlein pulse forming network (PFN) and applied to a parallel plate, circular electrode test configuration. Sample microorganisms were grown under standardized conditions and were introduced into test liquids in order to produce known population densities within the treatment celt. The organisms investigated include the mold Aspergillus niger, the yeast Sacckaromyeces cerevisiae, and the bacterial pathogens Bacillus cereus, Staphylococcus aureus, and Pseudomonas aeruginosa. The PEF studies were undertaken at a sample temperature range of 25/spl deg/C-30/spl deg/C, and the effect of the number of pulses on the test microbial population was studied. The results of this investigation showed that the greater the number of pulses applied, the larger the corresponding reduction in microbial cells/spores obtained. With the exception of dormant fungal spores, all of the test organisms were reduced by -3 to 4 log orders after 3000 pulses. The number of B. Cerus cells was reduced by -7.5 log orders after 15 000 pulses, of which 10 000 pulses were applied in a flowing system followed by 5000 pulses in a static system.

Pulsed electric field inactivation of diarrhoeagenic Bacillus cereus through irreversible electroporation.

The physical effects of high‐intensity pulsed electric fields (PEF) on the inactivation of diarrhoeagenic Bacillus cereus cells suspended in 0·1% peptone water were examined by transmission electron microscopy (TEM). The levels of PEF‐induced microbial cell death were determined by enumeration on tryptone soy yeast extract agar and Bacillus cereus‐selective agar plates. Following exposure to lethal levels of PEF, TEM investigation revealed irreversible cell membrane rupture at a number of locations, with the apparent leakage of intracellular contents. This study provides a clearer understanding of the mechanism of PEF‐induced cellular damage, information that is essential for the further optimization of this emerging food‐processing technology.

The operation of repetitive high-pressure spark gap switches

Two parallel experiments have been undertaken to investigate the mechanisms which govern the recovery of spark gap switches in repetitive applications. Measurement of the neutral gas density is accomplished using a laser Schlieren technique which enables spatial and temporal cooling of the gas to be observed. The rate of rise of voltage recovery is recorded using a double-pulse modulator system which determines the breakdown voltage of the gas at specific time intervals after breakdown by the first pulse. A continuous sweep voltage is applied to the switch in order to establish the influence of ions on the recovery characteristics. Results are presented for SF6/bin and air which show that voltage recovery is not solely governed by recovery of neutral gas density. There is a significant influence from the residual ion population created by the previous discharge. This influence is dominant for several hundred milliseconds after breakdown. The application of a suitable sweep voltage effectively minimizes the ion population, which results in significantly improved voltage recovery characteristics.

The influence of polarity on trigatron switching performance

This paper reports on a study into the effect of trigger voltage polarity and main gap voltage polarity on the switching performance of a pulse charged trigatron. The four polarity combinations possible, two homopolarity (trigger voltage and main gap voltage of the same polarity) and two heteropolarity (trigger voltage and main gap voltage of opposite polarity), were studied and compared in terms of their effect upon the switching range, delay time to breakdown, jitter, and voltage collapse time. It was found that the two heteropolarity configurations were superior to the homopolarity configurations in terms of the above switching characteristics, with the positive trigger/negative main gap heteropolarity configuration performing the best. The results are discussed, and an explanation of the influence of the polarity configuration on switching is suggested in terms of the discharge initiation mechanisms and subsequent development.