Oguz Yoldas

Microhardness of Composites in Simulated Root Canals Cured with Light Transmitting Posts and Glass-Fiber Reinforced Composite Posts

The aim of this study was to evaluate the depth of cure of composite resin cured within simulated root canals by means of light-transmitting plastic posts, glass-fiber-reinforced composite posts, and conventional light curing method. Thirty black plastic cylinders measuring 15 mm in length and 4 mm in internal diameter were divided into three groups. The composite resin was packed into simulated canals. The light-transmitting plastic posts and glass-fiber-reinforced composite posts were inserted into simulated canals and light cured for 90 seconds. The control group was light cured directly. To ensure continual change of material properties by increasing the length of material, a surface microhardness test was done 2 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, and 14 mm from the light exposure surface. The results showed a significant increase in microhardness of composite resin (depth of cure) for both light-transmitting plastic posts and glass-fiber-reinforced composite posts compared with the control group. The microhardness of composite resin was also significantly higher with light-transmitting plastic posts than glass-fiber-reinforced composite posts after 8 mm.

Silorane‐Based Composite: Depth of Cure, Surface Hardness, Degree of Conversion, and Cervical Microleakage in Class II Cavities

OBJECTIVE The purpose of this study was to determine the depth of cure, degree of conversion (DC), hardness, and cervical sealing ability of silorane-based composite (Filtek Silorane [FS; 3M, Seefeld, Germany]) and to compare with methacrylate-based composites (MBCs = Filtek Supreme XT [FSXT] and Filtek P60 [FP60]). MATERIALS AND METHODS The DC and hardness of every material were evaluated after 1, 7, and 30 days. The depth of cure was determined using the ISO 4049:2000 standard. Microleakage was evaluated by measuring dye penetration across the gingival wall in cross-sectioned specimens. RESULTS FS showed lower depth of cure than FSXT and FP60. The DC of FS was significantly lower when compared to FP60 and FSXT. FS exhibited lower hardness than both FSXT and FP60 after 1 day of storage. The hardness of FS remained unchanged during the storage period. FS showed reduced microleakage scores compared to FSXT and showed similar microleakage scores compared to FP60. CONCLUSIONS In conclusion, the DC and cure depth of FS are lower than those of MBCs. However, FS revealed stable hardness in water that is comparable to MBCs. The sealing ability of FS is similar or even better than that of MBCs.

Influence of different indentation load and dwell time on Knoop microhardness tests for composite materials

Abstract Various microhardness test methods with different indentation loads and dwell times have been used to evaluate the hardness of composite materials. However, there is still no agreement on the ideal test method for composites. The aim of this study was to determine the influence of different indentation load and dwell time on Knoop Hardness Number (KHN) of three different kinds of light-cured composites. A mold was fabricated to make cylindrical specimens of three different composite resins (TPH, Tetric Ceram, Surefil), and 45 cylindrical composite discs were prepared. Hardness tests on the materials were performed with three different loads at two different dwell times. One-way analysis of variance and LSD did not reveal a statistically significant difference between TPH and Surefil with 50 gf at both dwell times. However, on the other matched load and time groups, Surefil exhibited higher KHN than TPH and Tetric Ceram. Our results suggest that the indentation load is critical for micro-indentation hardness tests and as the results are directly affected, further studies are needed to standardize the micro-indentation test load.

Outcomes of periradicular surgery of maxillary first molars using a vestibular approach: a prospective, clinical study with one year of follow-up.

PURPOSE The aim of the present prospective, randomized, controlled, clinical study was to compare the outcomes of periradicular surgery of the maxillary first molar tooth using the vestibular approach between 2 preoperative radiologic evaluation methods: cone beam computed tomography (CBCT) and conventional radiography. PATIENTS AND METHODS Periradicular surgery was applied to the maxillary first molar tooth in 40 patients. The patients were divided into 2 groups. The patients in group 1 underwent examination and preoperative planning with CBCT, and the patients in group 2 underwent examination and preoperative planning with conventional radiography. The outcomes of the treatment were evaluated radiographically and clinically, and the data were analyzed statistically. RESULTS The mean operative time was significantly shorter in group 1 than in group 2. According to the radiographic and clinical healing criteria used in the present study, the healing of patients in group 1 was rated as a success in 35%, an improvement in 40%, and a failure in 25%. In the group 2 patients, healing was rated as a success in 42.1%, an improvement in 31.6%, and a failure in 26.3%. Sinus membrane elevation was performed in 92.3% of all patients. Sinus membrane perforation occurred in 20% of the patients in group 1 and 36.8% of the patients in group 2. CONCLUSIONS Periradicular surgery of maxillary first molars using a vestibular approach is a viable treatment method with a low complication rate. Preoperative CBCT examination demonstrated positive contributions to the treatment outcomes.

Polymerase chain reaction of enterococcus faecalis and candida albicans in apical periodontitis from Turkish patients

Aim: The aim of this study was to determine the frequency of two important pathogenic microorganisms associated with endodontic infections, Enterococcus faecalis and Candida albicans, in root canal samples from patients with necrotic pulps or failed canal therapy by polymerase chain reaction method. Method: Microbial samples were obtained from 117 teeth with necrotic pulp tissues and 114 teeth with failed endodontic treatment. Results: E.faecalis were identified in 16% of the necrotic and 10% of the retreated root canal infections by PCR. C.albicans genome were identified in 20% and 11% of the necrotic and retreated root canal infections, respectively, by PCR. The frequencies of microbiota were not statistically different between necrotic and retreatment groups (p > 0.05, chi squared test). Conclusions: PCR analysis of teeth with periapical lesions revealed that E.faecalis was found in fewer patients than in previous studies. The C.albicans prevelance was consistent with previous reports. No statistical difference was found between primary and secondary root canal infections for C.albicans or E.faecalis. Key words:Primary root canal infection, secondary root canal infection, E.faecalis, C.albicans.

Effect of different light sources in combination with a light‐transmitting post on the degree of conversion of resin composite at different depths of simulated root canals

AIM The aim of this study was to evaluate the degree of conversion (DC) of composite resin at different depths of simulated immature root canals using light-transmitting plastic post (LTPP) and three different light sources. METHODOLOGY Composite resin was packed into 60 black plastic cylinders 12mm in length with 4mm internal diameters to simulate immature root canals. LTPPs were inserted into half of the simulated canals and the other half acted as controls. Both the simulated canals with LTPPs and the controls were divided into three groups of 10, and each group was cured using either a quartz-tungsten-halogen (QTH), light-emitting diode (LED), or plasma arc (PAC) curing unit. Specimens were sectioned in three horizontally 24h after curing to represent cervical, middle, and apical levels. DC for each section of composite resin was measured using a Fourier transform infrared spectrophotometer, and data were analyzed using three-way anova and Tukey tests. RESULTS At the cervical level, no significant differences were found between specimens cured using different light sources or between specimens with and without LTPPs (P>0.05). However, DC was significantly higher in specimens with LTPPs than in those without LTPPs at both the middle and apical levels (P<0.05). The mean DC of all specimens with LTPPs was significantly higher than that of specimens without LTPPs (P<0.05). PAC unit showed lower DC than QTH and LED units at both the middle and apical levels; however, the differences were not statistically significant (P > 0.05). CONCLUSIONS The results of this study suggest that the use of a LTPP increased the DC of composite resin at the middle and apical levels of simulated immature root canals, but that DC was independent of type of light source.

Microhardness of Packable Composites Used as Posts Condensed with Different Methods

The purpose of this in vitro study was to evaluate the microhardness of packable composite compacted with hand or ultrasonic pluggers in post spaces. A total of 168 extracted human anterior teeth were prepared with Gates Glidden and ParaPost drills after obturation. A primer and a dentin-bonding agent were applied to the etched surface. Half of the specimens were compacted with an ultrasonic tip and the other half with a mechanical hand compactor and all specimens were polymerized for each increment. The roots were then sectioned horizontally from 0, 2.5, 3, 3.5, 4, 4.5, and 5 mm starting from the coronal and sliced 2.5-mm long. The microhardness test was applied to each specimen. There were statistically significant differences between ultrasonically and hand-condensed groups in whole specimens (p < 0.001). There were no significant differences between groups of 0, 2.5, and 3 mm until 3.5 mm was reached. After 3.5-mm depth, there were significant differences between the groups (p < 0.001). Ultrasonic condensation of packable composites provided mechanical advantage over hand condensation in root canals measuring microhardness in different depths. However, when microhardness was measured at different depths, values decreased after the depth of 3.5 mm in both condensation groups.

Antibacterial Efficacy of Calcium Hypochlorite with Vibringe Sonic Irrigation System on Enterococcus faecalis: An In Vitro Study

Aim. The purpose of this study was to compare the in vitro efficacy of calcium hypochlorite (Ca[OCl]2) and sodium hypochlorite (NaOCl) associated with sonic (Vibringe) irrigation system in root canals which were contaminated with Enterococcus faecalis. Material and Methods. The root canals of 84 single-rooted premolars were enlarged up to a file 40, autoclaved, inoculated with Enterococcus faecalis, and incubated for 21 days. The samples were divided into 7 groups according to the irrigation protocol: G0: no treatment; G1: distilled water; G2: 2.5% NaOCl; G3: 2.5% Ca(OCl)2; G4: distilled water with sonic activation; G5: 2.5% NaOCl with sonic activation; and G6: 2.5% Ca(OCl)2 with sonic activation. Before and after decontamination procedures microbiological samples were collected and the colony-forming units were counted and the percentages of reduction were calculated. Results. Distilled water with syringe irrigation and sonic activation groups demonstrated poor antibacterial effect on Enterococcus faecalis compared to other experimental groups (p < 0.05). There was no statistically significant difference between syringe and sonic irrigation systems with Ca(OCl)2 and NaOCl. Conclusion. The antimicrobial property of Ca(OCl)2 has been investigated and compared with that of NaOCl. Both conventional syringe irrigation and sonic irrigation were found effective at removing E. faecalis from the root canal of extracted human teeth.

Effect of irrigation technique for removal of triple antibiotic paste on bond strength of MTA to root dentin.

This study evaluated the bond strength of mineral trioxide aggregate (MTA) to root canal dentin after the performance of various irrigation procedures to remove triple antibiotic paste (TAP). A total of 56 single-rooted human mandibular premolars were instrumented using a rotary system to size 40 and divided randomly into a control group (no intracanal dressing) and three experimental groups (TAP application for 28 days). TAP was then removed by rinsing with 10 mL 2.5% NaOCl using three irrigation systems (Vibringe sonic irrigation, CanalBrush, and syringe irrigation). The coronal and middle parts of root canals were then obturated with MTA. After storage for 1 week, each specimen was embedded in an acrylic block and sectioned horizontally (2-mm-thick slices) at two levels (coronal and middle). Bond strength of MTA to root canal dentin was assessed in 28 samples per group via push-out test using a universal testing machine. Data from the four groups were compared using one-way analysis of variance. Tukeys test was used for multiple comparisons. Push-out bond strength values were significantly higher in the control and Vibringe groups than in the CanalBrush and syringe irrigation groups (p < 0.001). TAP removal from root canals with the Vibringe irrigation system may increase the push-out bond strength of MTA compared with the use of the CanalBrush or syringe irrigation.

Evaluation of various filling techniques in distal canals of mandibular molars instrumented with different single-file nickel-titanium systems

Background and Aims: The aim of this study was to evaluate the quality of various filling techniques in distal canals of mandibular molars instrumented with different single-file nickel-titanium (NiTi) systems. Materials and Methods: A total of 150 distal roots of mandibular molar teeth were randomly assigned into three main groups and instrumented by using Reciproc (VDW, Munich, Germany), WaveOne (Dentsply Tulsa, Tulsa, OK, USA), or One Shape (MicroMega, Besancon, France) NiTi file systems. The roots were then treated using one of five filling techniques: (1) Matched-single-cone, (2) cold lateral compaction with matched gutta-percha (GP) cone, (3) Thermafil filling, (4) System B/Obtura II, and (5) lateral compaction with standardized GP cones. The roots were then sectioned at three levels (coronal, middle, and apical). Photographs were acquired under a stereomicroscope, and the percentage of GP-filled areas (PGFAs), percentage of sealer-filled areas (PSFAs), and voids were measured using the ImageJ software. Comparisons between groups were applied using Student’s t-test or one-way ANOVA for normally distributed data. The Mann-Whitney U-test or Kruskal-Wallis test was used when variables were not normally distributed. Results: Canals filled with the System B/Obtura showed the highest PGFA and lowest PSFA, whereas those filled with matched-single-cone showed the highest PSFA and lowest PGFA (P < 0.05). The cold lateral compaction with matched GP cone group, lateral compaction group, and Thermafil filling group showed no statistically significant differences in PSFA and PGFA (P > 0.05). Conclusions: System B/Obtura technique appears to be the best technique to properly fill root canals, whereas the matched-single-cone technique in oval-shaped distal canals of mandibular molars was inadequate.