Oisik Das

A feasibility study of agricultural and sewage biomass as biochar, bioenergy and biocomposite feedstock: production, characterization and potential applications

In this study, we pyrolysed six waste derived biomass: pine sawdust (PSD), paunch grass (PG), broiler litter (BL), sewage sludge (SS), dewatered pond sludge (DWP), and dissolved air-floatation sludge (DAF) into biochar. Biochars were characterized using scanning electron microscopy, energy dispersive X-ray spectrometry, X-ray diffraction, Fourier transform infrared spectroscopy, inductively-coupled plasma mass spectrometry, (13)C-solid-state nuclear magnetic resonance spectroscopy, and X-ray photoelectron spectroscopy to evaluate their feasibility for potential agronomic and environmental applications. Syngas produced during the pyrolysis process was also analyzed to determine the energy values. Results show that PSD biochar has the utmost potential for carbon sequestration and contaminant remediation due to its high surface area, aromaticity and carbon content. Additionally given its low ash content, PSD biochar could also potentially be used as filler in wood plastic biocomposites. Low levels of heavy metals (Cr, Cu, Zn, As, Cd, Hg, and Pb) in all biochars suggest that biochars are also applicable for land application according to the United States Environmental Protection Agency regulation 40 CFR part 503. The composition of syngas evolved during the pyrolysis of feedstocks showed little difference in the calorific values, ranging from 12-16 MJ/dsm with PSD having the maximum calorific value of 16 MJ/dsm.

A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites

In an attempt to concurrently address the issues related to landfill gas emission and utilization of organic wastes, a relatively novel idea is introduced to develop biocomposites where biochar made from pyrolysis of waste wood (Pinus radiata) is added with the same wood, plastic/polymer (polypropylene) and maleated anhydride polypropylene (MAPP). Experiments were conducted by manufacturing wood and polypropylene composites (WPCs) mixed with 6 wt%, 12 wt%, 18 wt%, 24 wt%, and 30 wt% biochar. Though 6 wt% addition had similar properties to that of the control (composite without biochar), increasing biochar content to 24 wt% improved the composites tensile/flexural strengths and moduli. The biochar, having high surface area due to fine particles and being highly carbonised, acted as reinforcing filler in the biocomposite. Composites having 12 wt% and 18 wt% of biochar were found to be the most ductile and thermally stable, respectively. This study demonstrates that, WPCs added with biochar has good potential to mitigate wastes while simultaneously producing biocomposites having properties that might be suited for various end applications.

Mechanism of waste biomass pyrolysis: Effect of physical and chemical pre-treatments

To impart usability in waste based biomass through thermo-chemical reactions, several physical and chemical pre-treatments were conducted to gain an insight on their mode of action, effect on the chemistry and the change in thermal degradation profiles. Two different waste biomasses (Douglas fir, a softwood and hybrid poplar, a hardwood) were subjected to four different pre-treatments, namely, hot water pre-treatment, torrefaction, acid (sulphuric acid) and salt (ammonium phosphate) doping. Post pre-treatments, the changes in the biomass structure, chemistry, and thermal makeup were studied through electron microscopy, atomic absorption/ultra violet spectroscopy, ion exchange chromatography, and thermogravimetry. The pre-treatments significantly reduced the amounts of inorganic ash, extractives, metals, and hemicellulose from both the biomass samples. Furthermore, hot water and torrefaction pre-treatment caused mechanical disruption in biomass fibres leading to smaller particle sizes. Torrefaction of Douglas fir wood yielded more solid product than hybrid poplar. Finally, the salt pre-treatment increased the activation energies of the biomass samples (especially Douglas fir) to a great extent. Thus, salt pre-treatment was found to bestow thermal stability in the biomass.

Biocomposites from waste derived biochars: Mechanical, thermal, chemical, and morphological properties

To identify a route for organic wastes utilisation, biochar made from various feedstocks (landfill pine saw dust, sewage sludge, and poultry litter) and at diverse pyrolysis conditions, were collected. These biochars were used to fabricate wood and polypropylene biocomposites with a loading level of 24 mass%. The composites were tested for their mechanical, chemical, thermal, morphological, and fire properties. The poultry litter biochar biocomposite, with highest ash content, was found to have high values of tensile/flexural strength, tensile/flexural modulus, and impact strength, compared to other composites. In general, addition of all the biochars enhanced the tensile/flexural moduli of the composites. The crystal structure of polypropylene in the composite was intact after the incorporation of all the biochars. The final chemical and crystal structure of the composite were an additive function of the individual components. The biochar particles along with wood acted as nucleating agents for the recrystallization of polypropylene in composite. Each component in the composites was found to decompose individually under thermal regime. The electron microscopy revealed the infiltration of polypropylene into the biochar pores and a general good dispersion in most composites. The poultry litter composite was found to have lower heat release rate under combustion regime.

The love-hate relationship of pyrolysis biochar and water: A perspective☆

Biochar is being considered for environmental sustainability by the scientific community and as a result is extensively investigated for various applications in agriculture, remediation and construction. Hence, a sound knowledge of biochars physical and chemical properties is critical. However, the dynamics of biochar-water interaction remain ambiguous. We hypothesize that the hydrophobicity of a biochar made at low pyrolysis temperature is not permanent under water-rich conditions. Our results suggest that the aliphatic functional groups responsible for biochars hydrophobicity are displaced when subjected to water which eventually increases the affinity of the biochar towards water. We envisage that commentary would stimulate researchers to investigate the biochar-water interaction in a new light and eventually help design a biochar which would be apt for their intended end use.

Characterisation of waste derived biochar added biocomposites: chemical and thermal modifications

A step towards sustainability was taken by incorporating waste based pyrolysed biochar in wood and polypropylene biocomposites. The effect of biochar particles on the chemistry and thermal makeup of the composites was determined by characterising them through an array of characterisation techniques such as 3D optical profiling, X-ray diffraction, transmission electron microscopy, electron spin/nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. It was observed that addition of biochar increased the presence of free radicals in the composite while also improving its thermal conductivity. Biochar particles did not interfere with the melting behaviour of polymer in the thermal regime. However, wood and biochar acted as nucleation agents consequently increasing the crystallisation temperature. The crystal structure of polypropylene was not disrupted by biochar inclusion in composite. Transmission electron microscopy images illustrated the aggregated nature of the biochar particles at higher loading levels. Nuclear magnetic resonance studies revealed the aromatic nature of biochar and the broadening of peak intensities of composites with increasing biochar levels due to its amorphous nature and presence of free radicals. Thus, this insight into the chemical and thermal modification of biochar added composites would allow effective engineering to optimise their properties while simultaneously utilising wastes.

Value added liquid products from waste biomass pyrolysis using pretreatments

Douglas fir wood, a forestry waste, was attempted to be converted into value added products by pretreatments followed by pyrolysis. Four different types of pretreatments were employed, namely, hot water treatment, torrefaction, sulphuric acid and ammonium phosphate doping. Subsequently, pyrolysis was done at 500°C and the resulting bio-oils were analysed for their chemical composition using Karl Fischer titration, thermogravimetry, ion exchange, and gas chromatography. Pretreatment with acid resulted in the highest yield of bio-oil (~60%). The acid and salt pretreatments were responsible for drastic reduction in the lignin oligomers and enhancement of water content in the pyrolytic liquid. The quantity of xylose/mannose reduced as a result of pretreatments. Although, the content of fermentable sugars remained similar across all the pretreatments, the yield of levoglucosan increased. Pretreatment of the biomass with acid yielded the highest amount of levoglucosan in the bio-oil (13.21%). The acid and salt pretreatments also elevated the amount of acetic acid in the bio-oils. Addition of acid and salt to the biomass altered the interaction of cellulose-lignin in the pyrolysis regime. Application of pretreatments should be based on the intended end use of the liquid product having a desired chemical composition.

An Attempt to Find a Suitable Biomass for Biochar-Based Polypropylene Biocomposites

Four biomass wastes (rice husk, coffee husk, coarse wool, and landfill wood) were added with biochar and polypropylene (PP) to manufacture biocomposites. Individual biomasses were tested for their combustion behavior using cone calorimeter. Biocomposites were analyzed for their fire/thermal, mechanical, and morphological properties. Wood had the most desirable comprehensive effect on both the mechanical and fire properties of composites. In particular, wood and biochar composite exhibited the highest values of tensile/flexural properties with a relatively low peak heat release rate. In general, application of waste derived biochar and biomasses drastically reduced the susceptibility of neat PP towards fire.

The mechanics of biocomposites

Abstract Composite materials having bio-based constituents are strong candidates for biomedical applications due to the possibility of potential biocompatibility. Therefore an overview is presented regarding the theoretical aspects related to the design of polymeric biocomposites. Since, the fundamental mechanical response of most composites is in macro and micro level, the basic concepts for designing composite materials have been discussed. In particular, the mechanics of composite laminates along with prediction models are introduced. Moreover, the mechanics of short fibre and particulate composites are thoroughly examined. Two innovative bio-based reinforcements, namely wool (as short fibre) and biochar (as particulate) are reviewed for their individual mechanical properties simultaneously with their effect on the performance properties of the resulting biocomposites. Finally, an interesting class of biocomposites, called cellulose nanocomposites and its mechanics have been explored which holds immense potential for new age biocomposites in medical applications.