Ojars J. Sovers

The International Celestial Reference Frame as Realized by Very Long Baseline Interferometry

A quasi-inertial reference frame is defined based on the radio positions of 212 extragalactic sources distributed over the entire sky. The positional accuracy of these sources is better than about 1 mas in both coordinates. The radio positions are based upon a general solution for all applicable dual-frequency 2.3 and 8.4 GHz Mark III very long baseline interferometry data available through the middle of 1995, consisting of 1.6 million pairs of group delay and phase delay rate observations. Positions and details are also given for an additional 396 objects that either need further observation or are currently unsuitable for the definition of a high-accuracy reference frame. The final orientation of the frame axes has been obtained by a rotation of the positions into the system of the International Celestial Reference System and is consistent with the FK5 J2000.0 optical system, within the limits of the link accuracy. The resulting International Celestial Reference Frame has been adopted by the International Astronomical Union as the fundamental celestial reference frame, replacing the FK5 optical frame as of 1998 January 1.

Astrometry and geodesy with radio interferometry: experiments, models, results

Interferometry at radio frequencies between Earth-based receivers separated by intercontinental distances has made significant contributions to astrometry and geophysics during the past three decades. Analyses of such very long baseline interferometric (VLBI) experiments now permit measurements of relative positions of points on the Earths surface and of angles between celestial objects at levels of better than one cm and one nanoradian, respectively. The relative angular positions of extragalactic radio sources inferred from this technique presently form the best realization of an inertial reference frame. This review summarizes the current status of radio interferometric measurements for astrometric and geodetic applications. It emphasizes the theoretical models that are required to extract results from the VLBI observables at present accuracy levels. An unusually broad cross section of physics contributes to the required modeling. Both special and general relativity need to be considered in properly formulating the geometric part of the propagation delay. While high-altitude atmospheric charged-particle (ionospheric) effects are easily calibrated for measurements employing two well-separated frequencies, the contribution of the neutral atmosphere at lower altitudes is more difficult to remove. In fact, mismodeling of the troposphere remains the dominant error source. Plate tectonic motions of the observing stations need to be taken into account, as well as the nonpointlike intensity distributions of many sources. Numerous small periodic and quasiperiodic tidal effects also make important contributions to space geodetic observables at the centimeter level, and some of these are just beginning to be characterized. Another area of current rapid advances is the specification of the orientation of the Earths spin axis in inertial space: nutation and precession. Highlights of the achievements of very long baseline interferometry are presented in four areas: reference frames, Earth orientation, atmospheric effects on microwave propagation, and relativity. The order-of-magnitude improvement of accuracy that was achieved during the last decade has provided essential input to geophysical models of the Earths internal structure. Most aspects of VLBI modeling are also directly applicable to interpretation of other space geodetic measurements, such as active and passive ranging to Earth-orbiting satellites, interplanetary spacecraft, and the Moon.

THE CELESTIAL REFERENCE FRAME AT 24 AND 43 GHz. II. IMAGING

We have measured the sub-milli-arcsecond structure of 274 extragalactic sources at 24 and 43 GHz in order to assess their astrometric suitability for use in a high frequency celestial reference frame (CRF). Ten sessions of observations with the Very Long Baseline Array have been conducted over the course of

Use of Reference Frames for Interplanetary Navigation at JPL

\sim

Structure Corrections in Modeling VLBI Delays for RDV Data

5 years, with a total of 1339 images produced for the 274 sources. There are several quantities that can be used to characterize the impact of intrinsic source structure on astrometric observations including the source flux density, the flux density variability, the source structure index, the source compactness, and the compactness variability. A detailed analysis of these imaging quantities shows that (1) our selection of compact sources from 8.4 GHz catalogs yielded sources with flux densities, averaged over the sessions in which each source was observed, of about 1 Jy at both 24 and 43 GHz, (2) on average the source flux densities at 24 GHz varied by 20%-25% relative to their mean values, with variations in the session-to-session flux density scale being less than 10%, (3) sources were found to be more compact with less intrinsic structure at higher frequencies, and (4) variations of the core radio emission relative to the total flux density of the source are less than 8% on average at 24 GHz. We conclude that the reduction in the effects due to source structure gained by observing at higher frequencies will result in an improved CRF and a pool of high-quality fiducial reference points for use in spacecraft navigation over the next decade.

Rotational Alignment Altered by Source Position Correlations

Navigation of interplanetary spacecraft is typically based on range, Doppler, and differential interferometric measurements made by ground-based telescopes. Successful tracking requires knowledge of the telescope positions in the terrestrial reference frame. Spacecraft move against a background of extra-galactic radio sources and navigation depends upon precise knowledge of those background radio source positions in the celestial reference frame. Work is underway at JPL to reprocess historical VLBI and GPS data to improve realizations of the terrestrial and celestial frames. The purpose of this brief paper is to provide a snapshot of reference frame results.