Olaf Soltwedel

Interactions of PAMAM Dendrimers with Negatively Charged Model Biomembranes.

We have investigated the interactions between cationic poly(amidoamine) (PAMAM) dendrimers of generation 4 (G4), a potential gene transfection vector, with net-anionic model biomembranes composed of different ratios of zwitterionic phosphocholine (PC) and anionic phospho-L-serine (PS) phospholipids. Two types of model membranes were used: solid-supported bilayers, prepared with lipids carrying palmitoyl-oleoyl (PO) and diphytanoyl (DPh) acyl chains, and free-standing bilayers, formed at the interface between two aqueous droplets in oil (droplet interface bilayers, DIBs) using the DPh-based lipids. G4 dendrimers were found to translocate through POPC:POPS bilayers deposited on silica surfaces. The charge density of the bilayer affects translocation, which is reduced when the ionic strength increases. This shows that the dendrimer-bilayer interactions are largely controlled by their electrostatic attraction. The structure of the solid-supported bilayers remains intact upon translocation of the dendrimer. However, the amount of lipids in the bilayer decreases and dendrimer/lipid aggregates are formed in bulk solution, which can be deposited on the interfacial layers upon dilution of the system with dendrimer-free solvent. Electrophysiology measurements on DIBs confirm that G4 dendrimers cross the lipid membranes containing PS, which then become more permeable to ions. The obtained results have implications for PAMAM dendrimers as delivery vehicles to cells.

Mesoscopic Correlation Functions in Heterogeneous Ionic Liquids

A common feature of ionic liquids composed of cations with long aliphatic side chains is structural heterogeneities on the nanometer length scale. This so-called microphase separation arises from the clustering of aliphatic moieties. The temperature dependence of the liquid bulk structure was studied by small-angle X-ray and neutron scattering for a set of methylimidazolium ([C18C1im]+, [C22C1im]+) based ionic liquids with tris(pentafluoroethyl)trifluorophosphate ([FAP]-), bis(trifluoromethylsulfonyl)imide ([NTf2]-), and bis(nonafluorobutylsulfonyl)imide ([NNf2]-) anions. The experimental data is quantitatively analyzed using a generalized Teubner-Strey model. Discussion of the resulting periodicity d and correlation length ξ shows that the structural heterogeneities are governed by the interplay between the alkyl chain length, the geometry of the anion, and entropic effects. Connections between the mesoscopic correlation functions, density, and entropy of fusion are discussed in comparison to alcohols. The observed dependencies allow predictions on the mesoscopic correlation functions based on macroscopic bulk quantities.

Element-specific depth profile of magnetism and stoichiometry at the La0.67Sr0.33MnO3/BiFeO3 interface

Depth-sensitive magnetic, structural and chemical characterization is important in the understanding and optimization of novel physical phenomena emerging at interfaces of transition metal oxide heterostructures. In a simultaneous approach we have used polarized neutron and resonant X-ray reflectometry to determine the magnetic profile across atomically sharp interfaces of ferromagnetic La0.67Sr0.33MnO3 / multiferroic BiFeO3 bi-layers with sub-nanometer resolution. In particular, the X-ray resonant magnetic reflectivity measurements at the Fe and Mn resonance edges allowed us to determine the element specific depth profile of the ferromagnetic moments in both the La0.67Sr0.33MnO3 and BiFeO3 layers. Our measurements indicate a magnetically diluted interface layer within the La0.67Sr0.33MnO3 layer, in contrast to previous observations on inversely deposited layers. Additional resonant X-ray reflection measurements indicate a region of an altered Mn- and O-content at the interface, with a thickness matching that of the magnetic diluted layer, as origin of the reduction of the magnetic moment.

Molecular recognition of nucleic acids by nucleolipid/dendrimer surface complexes

We show for the first time that 1,2-dilauroyl-sn-glycero-3-phosphatidyladenosine nucleolipid surface complexes with cationic poly(amidoamine) dendrimers can be used to selectively bind DNA including oligonucleotides. This molecular recognition has high potential for applications involving biomedical and bioanalytic devices as well as drug delivery systems based on nucleic acids.

Aggregation and Rearrangement within a Silver Nanoparticle Layer during Polyelectrolyte Multilayer Formation

Silver nanoparticles (4.5 nm average radius) are used as the first negatively charged layer of a polyelectrolyte multilayer prepared subsequently from poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate) (PSS) solutions with 1 M KCl. After adsorption of a PAH layer on top of the silver nanoparticle monolayer, particle aggregation occurs, as evidenced by the double peak of the UV-vis absorption spectrum and by the decreased number of the objects found with AFM. On adsorption of the first PSS layer on top of the Ag/PAH sandwich, the nanoparticles remain close as is indicated by a the reduced object count and the changed absorption spectrum. If the PAH layer covering the Ag nanoparticles is adsorbed from salt-free solution, the nanoparticles remain isolated. Apparently, the aggregation is mediated by the PAH adsorbing in coiled conformation. Additionally, UV-vis and X-ray reflectivity evidence is found for lateral yet not vertical nanoparticle movement when polyelectrolytes adsorb, even if the adsorbing coils do not touch the nanoparticles directly.

Relationship between Structure and Fluctuations of Lipid Nonlamellar Phases Deposited at the Solid-Liquid Interface

The structure and dynamics of nanostructure films formed by mixtures of soy phosphatidylcholine and glycerol dioleate at the silicon-aqueous interface were studied by grazing incidence neutron spin echo spectroscopy (GINSES), specular and off-specular neutron reflectometry, and small-angle X-ray diffraction. Reverse hexagonal (HII) and micellar cubic phase (Fd3m) layers at the solid-liquid interface have been identified with neutron reflectometry measurements. A preferred orientation of the liquid crystalline (LC) domains was observed only for the anisotropic HII phase. The size of the LC domains was found to be about 1 micrometer as estimated from the width of the diffraction peaks. GINSES revealed that the cubic phase forms rather rigid films. In comparison, the HII film was more flexible, appearing as a modified undulation spectrum of the cylinders due to the interaction with the substrate.

Structural, magnetic, and superconducting properties of pulsed-laser-deposition-grown La1.85 Sr0.15 CuO4 / La2/3 Ca1/3 MnO3 superlattices on (001)-oriented LaSrAlO4 substrates

Epitaxial La1.85 Sr0.15 CuO4 / La2/3 Ca1/3 MnO3 (LSCO/LCMO) superlattices (SL) on (001)- oriented LaSrAlO4 substrates have been grown with pulsed laser deposition (PLD) technique. Their structural, magnetic and superconducting properties have been determined with in-situ reflection high energy electron diffraction (RHEED), x-ray diffraction, specular neutron reflectometry, scanning transmission electron microscopy (STEM), electric transport, and magnetization measurements. We find that despite the large mismatch between the in-plane lattice parameters of LSCO (a = 0.3779 nm) and LCMO (a = 0.387 nm) these superlattices can be grown epitaxially and with a high crystalline quality. While the first LSCO layer remains clamped to the LSAO substrate, a sizeable strain relaxation occurs already in the first LCMO layer. The following LSCO and LCMO layers adopt a nearly balanced state in which the tensile and compressive strain effects yield alternating in-plane lattice parameters with an almost constant average value. No major defects are observed in the LSCO layers, while a significant number of vertical antiphase boundaries are found in the LCMO layers. The LSCO layers remain superconducting with a relatively high superconducting onset temperature of Tconset ≈ 36 K. The macroscopic superconducting response is also evident in the magnetization data due to a weak diamagnetic signal below 10 K for H ∥ ab and a sizeable paramagnetic shift for H ∥ c that can be explained in terms of a vortex-pinning-induced flux compression. The LCMO layers maintain a strongly ferromagnetic state with a Curie temperature of TCurie ≈ 190 K and a large low-temperature saturation moment of about 3.5 (1) μB. These results suggest that the LSCO/LCMO superlattices can be used to study the interaction between the antagonistic ferromagnetic and superconducting orders and, in combination with previous studies on YBCO/LCMO superlattices, may allow one to identify the relevant mechanisms.

Drastic Swelling of Lipid Oligobilayers by Polyelectrolytes - A Potential Molecular Model for the Internal Structure of Lubricating Films in Mammalian Joints

Osteoarthritis is the most common arthropathy in western civilization. It is primarily caused by the degeneration of lipid-coated cartilage, leading to increased friction in joints. Hyaluronic acid (HA), a negatively charged polysaccharide and the main component of the synovial fluid, is held responsible for joint lubrication. It is believed that HA, adsorbed to the lipid-coated cartilage, forms a protective layer against wear. Studies have shown that the concentration and molecular weight (MW) of HA are reduced in joints suffering from osteoarthritis. On the basis of these observations, local joint injections of HA or mixtures of HA and surface-active phospholipids (SAPLs) have been applied as medical cures to restore the functionality of the joints in a procedure called viscosupplementation. However, this cure is still disputed, and no consensus has been reached with respect to optimum HA concentration and MW. To provide detailed insight in the structural rearrangement of lipid films upon contact with HA or polymeric analogues, we studied the interaction of the polyelectrolyte poly(allylamine hydrochloride) (PAH) with surface-bound oligobilayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) by neutron reflectivity (NR) and ellipsometry. Using this model system, we found a drastic swelling of the lipid films as a function of PAH concentration, whose strength compares to that in previous studies on HA incubation. In contrast, no significant dependence of film thickness on PAH MW was observed. A detailed picture of the film architecture was developed which inter alia shows that charged PAH is adsorbed to the lipid headgroups, leading to electrostatic repulsion. The swelling behavior is well explained by the equilibrium of Coulomb and van der Waals interactions in a DLVO-based model. Our detailed structural analysis of the PAH/lipid interfacial layer may help to elucidate the mechanisms of viscosupplementation and derive a structure-function relationship for the lubricating interface in mammalian joints.

Temperature responsive behavior of polymer brush/polyelectrolyte multilayer composites

The complex interaction of polyelectrolyte multilayers (PEMs) physisorbed onto end-grafted polymer brushes with focus on the temperature-responsive behavior of the system is addressed in this work. The investigated brush/multilayer composite consists of a poly(styrene sulfonate)/poly(diallyldimethylammonium chloride) (PSS/PDADMAC) multilayer deposited onto the poly(N-isopropylacrylamide-b-dimethylaminoethyl methacrylate) P(NIPAM-b-DMAEMA) brush. Ellipsometry and neutron reflectometry were used to monitor the brush collapse with the thickness decrease as a function of temperature and the change in the monomer distribution perpendicular to the substrate at temperatures below, across and above the phase transition, respectively. It was found that the adsorption of PEMs onto polymer brushes had a hydrophobization effect on PDMAEMA, inducing the shift of its phase transition to lower temperatures, but without suppressing its temperature-responsiveness. Moreover, the diffusion of the free polyelectrolyte chains inside the charged brush was proved by comparing the neutron scattering length density profile of pure and the corresponding PEM-capped brushes, eased by the enhanced contrast between hydrogenated brushes and deuterated PSS chains. The results presented herein demonstrate the possibility of combining a temperature-responsive brush with polyelectrolyte multilayers without quenching the responsive behavior, even though significant interpolyelectrolyte interactions are present. This is of importance for the design of multicompartment coatings, where the brush can be used as a reservoir for the controlled release of substances and the multilayer on the top as a membrane to control the diffusion in/out by applying different stimuli.