Oleg Prymak

Functionalisation of calcium phosphate nanoparticles by oligonucleotides and their application for gene silencing

In molecular biology, the production of proteins can be effectively inhibited by introducing specific oligonucleotides into a living cell (gene silencing or antisense strategy; important for gene therapy). Calcium phosphate nanoparticles can serve as carriers for biomolecules in such therapeutic applications due to their high biocompatibility and biodegradability. Stable colloids were prepared by coating the inorganic nanoparticles with single- and double-stranded oligonucleotides. The dispersions were analysed by dynamic light scattering, zeta potential measurements, transmission electron microscopy, and scanning electron microscopy. Particles with a diameter of about 100 nm were obtained under optimized conditions. The efficiency of such nanoparticles to specifically inhibit protein synthesis was tested on HeLa-EGFP cells whose green fluorescence was turned off by the coated nanoparticles (gene silencing with siRNA). If siRNA was incorporated into the calcium phosphate particle and thereby protected from intracellular degradation, the transfection efficiency was significantly increased. The dispersions were stable and could be stored at 4 °C without loss of activity for several weeks, making them available as biochemical reagents.

Calcium sulfate hemihydrate is the inorganic mineral in statoliths of Scyphozoan medusae (Cnidaria)

Scyphomedusae use inorganic crystals (statoliths) for gravity sensing. The organs which contain the statoliths are called rhopalia. Rhopalia of five different species of the three different orders of the class Scyphozoa were studied with high-end solid-state chemical methods to elucidate the crystallographic nature of the biomineral: synchrotron powder diffraction, synchrotron single-crystal diffraction, synchrotron microtomography, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Each rhopalium contains a large number of statoliths in an ordered way. The statoliths of all species consist of calcium sulfate hemihydrate, a water-deficient phase. This is remarkable for sea-living organisms consisting mostly of water. The phylogenetic relationships within the class Scyphozoa are discussed.

Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study

Silicate-containing hydroxyapatite-based coatings with different structure and calcium/phosphate ratios were prepared by radio-frequency magnetron sputtering on silicon and titanium substrates, respectively. Scanning electron microscopy, X-ray diffraction and IR spectroscopy were used to investigate the effect of the substrate bias on the properties of the silicate-containing hydroxyapatite-based coatings. The deposition rate, composition, and microstructure of the deposited coatings were all controlled by changing the bias voltage from grounded (0 V) to −50 and −100 V. The biocompatibility was assessed by cell culture with human osteoblast-like cells (MG-63 cell line), showing a good biocompatibility and cell growth on the substrates.

Nano-hydroxyapatite-coated metal-ceramic composite of iron-tricalcium phosphate: Improving the surface wettability, adhesion and proliferation of mesenchymal stem cells in vitro

Thin radio-frequency magnetron sputter deposited nano-hydroxyapatite (HA) films were prepared on the surface of a Fe-tricalcium phosphate (Fe-TCP) bioceramic composite, which was obtained using a conventional powder injection moulding technique. The obtained nano-hydroxyapatite coated Fe-TCP biocomposites (nano-HA-Fe-TCP) were studied with respect to their chemical and phase composition, surface morphology, water contact angle, surface free energy and hysteresis. The deposition process resulted in a homogeneous, single-phase HA coating. The ability of the surface to support adhesion and the proliferation of human mesenchymal stem cells (hMSCs) was studied using biological short-term tests in vitro. The surface of the uncoated Fe-TCP bioceramic composite showed an initial cell attachment after 24h of seeding, but adhesion, proliferation and growth did not persist during 14 days of culture. However, the HA-Fe-TCP surfaces allowed cell adhesion, and proliferation during 14 days. The deposition of the nano-HA films on the Fe-TCP surface resulted in higher surface energy, improved hydrophilicity and biocompatibility compared with the surface of the uncoated Fe-TCP. Furthermore, it is suggested that an increase in the polar component of the surface energy was responsible for the enhanced cell adhesion and proliferation in the case of the nano-HA-Fe-TCP biocomposites.

Characterization of crocodile teeth: Correlation of composition, microstructure, and hardness

Structure and composition of teeth of the saltwater crocodile Crocodylus porosus were characterized by several high-resolution analytical techniques. X-ray diffraction in combination with elemental analysis and infrared spectroscopy showed that the mineral phase of the teeth is a carbonated calcium-deficient nanocrystalline hydroxyapatite in all three tooth-constituting tissues: Dentin, enamel, and cementum. The fluoride content in the three tissues is very low (<0.1 wt.%) and comparable to that in human teeth. The mineral content of dentin, enamel, and cementum as determined by thermogravimetry is 71.3, 80.5, and 66.8 wt.%, respectively. Synchrotron X-ray microtomography showed the internal structure and allowed to visualize the degree of mineralization in dentin, enamel, and cementum. Virtual sections through the tooth and scanning electron micrographs showed that the enamel layer is comparably thin (100-200 μm). The crystallites in the enamel are oriented perpendicularly to the tooth surface. At the dentin-enamel-junction, the packing density of crystallites decreases, and the crystallites do not display an ordered structure as in the enamel. The microhardness was 0.60±0.05 GPa for dentin, 3.15±0.15 GPa for enamel, 0.26±0.08 GPa for cementum close to the crown, and 0.31±0.04 GPa for cementum close to the root margin. This can be explained with the different degree of mineralization of the different tissue types and is comparable with human teeth.

Surface wettability and energy effects on the biological performance of poly-3-hydroxybutyrate films treated with RF plasma.

The surface properties of poly-3-hydroxybutyrate (P3HB) membranes were modified using oxygen and an ammonia radio-frequency (RF, 13.56 MHz) plasma. The plasma treatment procedures used in the study only affected the surface properties, including surface topography, without inducing any significant changes in the crystalline structure of the polymer, with the exception being a power level of 250 W. The wettability of the modified P3HB surfaces was significantly increased after the plasma treatment, irrespective of the treatment procedure used. It was revealed that both surface chemistry and surface roughness changes caused by the plasma treatment affected surface wettability. A treatment-induced surface aging effect was observed and resulted in an increase in the water contact angle and a decrease in the surface free energy. However, the difference in the water contact angle between the polymers that had been treated for 4 weeks and the untreated polymer surfaces was still significant. A dependence between cell adhesion and proliferation and the polar component of the surface energy was revealed. The increase in the polar component after the ammonia plasma modification significantly increased cell adhesion and proliferation on biodegradable polymer surfaces compared to the untreated P3HB and the P3HB modified using an oxygen plasma.

Nanostructure of wet-chemically prepared, polymer-stabilized silver-gold nanoalloys (6 nm) over the entire composition range

Bimetallic silver-gold nanoparticles were prepared by co-reduction using citrate and tannic acid in aqueous solution and colloidally stabilized with poly(N-vinylpyrrolidone) (PVP). The full composition range of silver : gold from 0 : 100 to 100 : 0 (n : n) was prepared with steps of 10 mol%. The nanoparticles were spherical, monodispersed, and had a diameter of ∼6 nm, except for Ag : Au 90 : 10 nanoparticles and pure Ag nanoparticles which were slightly larger. The size of the nanoalloys was determined by differential centrifugal sedimentation (DCS) and transmission electron microscopy (TEM). By means of X-ray powder diffraction (XRD) together with Rietveld refinement, precise lattice parameters, crystallite size and microstrain were determined. Scanning transmission electron microscopy (STEM) combined with energy-dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) showed that the particles consisted of a gold-rich core and a silver-rich shell. XRD and DCS indicated that the nanoparticles were not twinned, except for pure Ag and Ag : Au 90 : 10, although different domains were visible in the TEM. A remarkable negative deviation from Vegards linear rule of alloy mixtures was observed (isotropic contraction of the cubic unit cell with a minimum at a 50 : 50 composition). This effect was also found for Ag:Au bulk alloys, but it was much more pronounced for the nanoalloys. Notably, it was much less pronounced for pure silver and gold nanoparticles. The microstrain was increased along with the contraction of the unit cell with a broad maximum at a 50 : 50 composition. The synthesis is based on aqueous solvents and can be easily scaled up to a yield of several mg of a well dispersed nanoalloy with application potential due to its tuneable antibacterial action (silver) and its optical properties for bioimaging.

Solution-Based Synthesis of GeTe Octahedra at Low Temperature

GeTe octahedra were prepared by reaction of equimolar amounts of GeCl2·dioxane and Te(SiEt3)2 in oleylamine, whereas a slight excess of the Te precursor yielded GeTe octahedra decorated with elemental Te nanowires, which can be removed by washing with TOP. The mechanism of the GeTe formation is strongly influenced by the solvent. The expected elimination of Et3SiCl (dehalosilylation) only occurred in aprotic solvents, whereas Te(SiEt3)2 was found to react with primary and secondary amines with formation of silylamines. Temperature-dependent studies on the reaction in oleylamine showed that crystalline GeTe particles are formed at temperatures higher than 140 °C. XRD, SAED, and HRTEM studies proved the formation of rhombohedral GeTe nanoparticles. These findings were confirmed by a single-crystal and powder X-ray analysis. The rhombohedral structure modification was found, and the structure was solved in the acentric space group R3m.

Proliferation and osteogenic response of MC3T3-E1 pre-osteoblastic cells on porous zirconia ceramics stabilized with magnesia or yttria

Dense zirconia ceramics are used in bone applications due to their mechanical strength and biocompatibility, but lack osseointegration. A porous interface in contact with bone tissue may lead to better bone bonding but the biological properties of porous zirconia are not widely explored. The present study focuses on the manufacturing of an yttria- (YSZ) and a magnesia-stabilized (MgSZ) porous zirconia, and on their in vitro biological investigation. The sintered ceramics had similar characteristics of porosity, pore size and interconnectivity. Their elastic moduli and compressive strength values were within the range of the values of human cortical bone. MC3T3-E1 pre-osteoblasts were used to investigate the proliferation, alkaline phosphatase (ALP) activity, collagen deposition and expression profile of four genes involved in bone metabolism of cells on porous ceramics. Scanning electron and fluorescence microscopy were employed to visualize cell morphology and growth. Pre-osteoblasts adhered well on both ceramics but cell numbers on YSZ were higher. Cells exhibited an increase in ALP activity and collagen deposition after 14 days on both MgSZ and YSZ, with higher levels on YSZ. Real-time quantitative polymerase chain reaction (qPCR) showed that the expression of bone sialoprotein (Bsp) and collagen type I (col1aI) were significantly higher on YSZ. No significant differences were found in their ability to regulate the early gene expression of Runx2 and Alp. Nevertheless, the biomineralized calcium content was similar on both ceramics after 21 days, indicating that despite chemical differences, both scaffolds direct the pre-osteoblasts toward a mature state capable of mineralizing the extracellular matrix.

Incorporation of silver nanoparticles into magnetron-sputtered calcium phosphate layers on titanium as an antibacterial coating

A three-layer system of nanocrystalline hydroxyapatite (first layer; 1000nm thick), silver nanoparticles (second layer; 1.5μg Ag cm-2) and calcium phosphate (third layer, either 150 or 1000nm thick) on titanium was prepared by a combination of electrophoretic deposition of silver nanoparticles and the deposition of calcium phosphate by radio frequency magnetron sputtering. Scanning electron microscopy showed that the silver nanoparticles were evenly distributed over the surface. The adhesion of multilayered coating on the substrate was evaluated using the scratch test method. The resistance to cracking and delamination indicated that the multilayered coating has good resistance to contact damage. The release of silver ions from the hydroxyapatite/silver nanoparticle/calcium phosphate system into the phosphate-buffered saline (PBS) solution was measured by atomic absorption spectroscopy (AAS). Approximately one-third of the incorporated silver was released after 3days immersion into PBS, indicating a total release time of the order of weeks. There were no signs of cracks on the surface of the coating after immersion after various periods, indicating the excellent mechanical stability of the multilayered coating in the physiological environment. An antimicrobial effect against Escherichia coli was found for a 150nm thick outer layer of the calcium phosphate using a semi-quantitative turbidity test.