Oleksandr Nechyporchuk

Rheological properties of micro-/nanofibrillated cellulose suspensions: wall-slip and shear banding phenomena.

The rheological properties of enzymatically hydrolyzed and TEMPO-oxidized microfibrillated/nanofibrillated cellulose (MFC/NFC) aqueous suspensions were investigated in oscillation and steady-flow modes and were compared with the morphology of the studied materials. The flow instabilities, which introduce an error in the rheological measurements, were discovered during flow measurements. A wall-slip (interfacial slippage on the edge of geometry tools and suspension) was detected at low shear rates for two types of NFC suspensions while applying cone-plate geometry. A roughening of the tool surfaces was performed to overcome the aforementioned problem. Applying to TEMPO-oxidized NFC, a stronger suspension response was detected at low shear rates with higher values of measured shear stress. However, a shear banding (localization of shear within a sample volume) became more pronounced. The use of serrated tools for enzymatically hydrolyzed NFC produced lower shear stress at the moderate shear rates, which was influenced by water release from the suspension.

Current Progress in Rheology of Cellulose Nanofibril Suspensions

Cellulose nanofibrils (CNFs) are produced and commonly used in the form of aqueous suspensions or gels. A number of studies have focused lately on rheological properties of CNF suspensions, which gives insight into properties of such materials and can reflect their behavior during handling. This Review summarizes the recent progress in rheological studies on CNF aqueous suspensions using rotational rheometry. Here, we discuss linear viscoelastic properties, i.e., frequency-dependent storage and loss moduli; shear flow behavior, i.e., apparent viscosity and shear stress as a function of shear rate; local flow characteristics, etc. In this Review, we point out that the rheological behavior of at least two types of CNF suspensions should be distinguished: (i) ones produced using mechanical fibrillation with or without enzymatic pretreatment (no surface chemical modification), which possess highly flocculated structure, and (ii) ones produced involving chemical modification pretreatments, e.g., carboxylation, carboxymethylation, quaternization, or sulfonation, which possess better colloidal stability and do not evidently flocculate.

Effect of the oxidation treatment on the production of cellulose nanofiber suspensions from Posidonia oceanica: The rheological aspect

Different grades of cellulose nanofibrils (CNF) were prepared from Posidonia oceanica balls and leaves (POB and POL). Pretreatment using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation was performed to facilitate the fibrillation during ultrafine friction grinding process. The ensuing CNF batches were compared in terms of morphology and degree of fibrillation. The rheological properties of the produced CNF suspensions were also analyzed for varying doses of sodium hypochlorite used during the TEMPO- mediated oxidation procedure. The stronger fibrous network structures were formed when increasing the oxidant concentration, which was confirmed by the increase of the storage moduli value. P. oceanica balls were found to undergo stronger fibrillation and, consequently, to form stronger networks, compared to P. oceanica leaves, when using equivalent concentration of the oxidizing agent.

Wet Spinning of Flame-Retardant Cellulosic Fibers Supported by Interfacial Complexation of Cellulose Nanofibrils with Silica Nanoparticles

The inherent flammability of cellulosic fibers limits their use in some advanced applications. This work demonstrates for the first time the production of flame-retardant macroscopic fibers from wood-derived cellulose nanofibrils (CNF) and silica nanoparticles (SNP). The fibers are made by extrusion of aqueous suspensions of anionic CNF into a coagulation bath of cationic SNP at an acidic pH. As a result, the fibers with a CNF core and a SNP thin shell are produced through interfacial complexation. Silica-modified nanocellulose fibers with a diameter of ca. 15 μm, a titer of ca. 3 dtex and a tenacity of ca. 13 cN tex-1 are shown. The flame retardancy of the fibers is demonstrated, which is attributed to the capacity of SNP to promote char forming and heat insulation on the fiber surface.

On the potential of using nanocellulose for consolidation of painting canvases

Nanocellulose has been recently proposed as a novel consolidant for historical papers. Its use for painting canvas consolidation, however, remains unexplored. Here, we show for the first time how different nanocelluloses, namely mechanically isolated cellulose nanofibrils (CNF), carboxymethylated cellulose nanofibrils (CCNF) and cellulose nanocrystals (CNC), act as a bio-based alternative to synthetic resins and other conventional canvas consolidants. Importantly, we demonstrate that compared to some traditional consolidants, all tested nanocelluloses provided reinforcement in the adequate elongation regime. CCNF showed the best consolidation per added weight; however, it had to be handled at very low solids content compared to other nanocelluloses, exposing canvases to larger water volumes. CNC reinforced the least per added weight but could be used in more concentrated suspensions, giving the strongest consolidation after an equivalent number of coatings. CNF performed between CNC and CCNF. All nanocelluloses showed better consolidation than lining with synthetic adhesive (Beva 371) and linen canvas in the elongation region of interest.

Nanocellulose-based Materials for the Reinforcement of Modern Canvas-supported Paintings

The development and evaluation of alternative approaches to structural painting consolidation are of significant interest due to the risks associated with the poor reversibility and degradation of ...

Combined Nanocellulose/Nanosilica Approach for Multiscale Consolidation of Painting Canvases

The restoration of painting canvases is a complex problem that, because of the hierarchical nature of the canvas, requires intervention at several length scales. We propose an approach combining polyelectrolyte-treated silica nanoparticles (SNP) and cellulose nanofibrils (CNF) for canvas consolidation. The formulations, applied on model-degraded canvases, gave a total weight increase of <5 wt %. Scanning electron microscopy and micro-X-ray fluorescence measurements were used for determining the component distribution across the canvas depth, while tensile testing demonstrated the mechanical efficiency of the consolidation. CNF formed a film at the canvas surface that increased the ductility. SNP penetrated deeper and reinforced at the fiber scale, yielding higher stiffness. The two effects could be balanced by varying the SNP/CNF ratio to reach a suitable reinforcement. This approach offers an alternative to the conventional treatments based on, e.g., relining with a new canvas or application of synthetic...

Evaluation of the Adhesion and Performance of Natural Consolidants for Cotton Canvas Conservation

Recent developments in paper and canvas conservation have seen the introduction of nanocellulose (NC) as a compatible treatment for the consolidation of historical cellulosic artifacts and manuscripts. However, as part of the assessment of these new materials for canvas consolidation, the adhesion of the consolidation treatment (which takes place between the applied material and the substrate) has not yet been evaluated, and as a result, it is poorly understood by both the scientific and conservation communities. After evaluating the potential of NC treatments for the consolidation of cotton painting canvas, we investigate a route to promote the interaction between the existing canvas and the nanocellulose treatment, which is in our case made of cellulose nanofibrils (CNF). This was carried out by introducing a cationic polymer, polyamidoamine-epichlorohydrin (PAAE), as an intermediate layer between the canvas and the CNF. The morphological, chemical, and mechanical evaluation of the canvas samples at different relative humidity (RH) levels demonstrated how the adhesion of the added PAAE layer is a dominant factor in the consolidation process. Improvement in the coating of canvas single fibers by the CNF, higher adhesion energy between the canvas fibers and the CNF treatment, and finally overall stronger canvas reinforcement were observed following the introduction of PAAE. However, an increase in mechanical response to moisture sorption and desorption was also observed for the PAAE-treated canvases. Overall, this study shows the complexity of such systems and, as such, the relevance of using a multiscale approach for their assessment.