Olimpia Oliviero

Antiangiogenic activity of the endocannabinoid anandamide: Correlation to its tumor-suppressor efficacy†

Endocannabinoids are now emerging as suppressors of key cell‐signaling pathways involved in cancer cell growth, invasion, and metastasis. We have previously observed that the metabolically stable anandamide analog, 2‐methyl‐2′‐F‐anandamide (Met‐F‐AEA) can inhibit the growth of thyroid cancer in vivo. Our hypothesis was that the anti‐tumor effect observed could be at least in part ascribed to inhibition of neo‐angiogenesis. Therefore, the aim of this study was to assess the anti‐angiogenic activity of Met‐F‐AEA, to investigate the molecular mechanisms underlying this effect and whether Met‐F‐AEA could antagonize tumor‐induced endothelial cell sprouting. We show that Met‐F‐AEA inhibited bFGF‐stimulated endothelial cell proliferation, in a dose‐dependent manner, and also induced apoptosis, both effects reliant on cannabinoid CB1 receptor stimulation. Analyzing the signaling pathways implicated in angiogenesis, we observed that the bFGF‐induced ERK phosphorylation was antagonized by Met‐F‐AEA, and we found that p38 MAPK was involved in Met‐F‐AEA‐induced apoptosis. Moreover, Met‐F‐AEA was able to inhibit bi‐dimensional capillary‐like tube formation and activity of matrix metalloprotease MMP‐2, a major matrix degrading enzyme. Importantly, we demonstrated that Met‐F‐AEA is also functional in vivo since it inhibited angiogenesis in the chick chorioallantoic neovascularization model. Finally, Met‐F‐AEA inhibited tumor‐induced angiogenesis in a three‐dimensional model of endothelial and thyroid tumor cell (KiMol) spheroids co‐cultures in different 3‐D polymeric matrices that resemble tumor microenvironment and architecture. Thus, our results suggest that anandamide could be involved in the control of cancer growth targeting both tumor cell proliferation and the angiogenic stimulation of the vasculature. J. Cell. Physiol. 211: 495–503, 2007.

Bioactivation of collagen matrices through sustained VEGF release from PLGA microspheres.

The success of any tissue engineering implant relies upon prompt vascularization of the cellular construct and, hence, on the ability of the scaffold to broadcast specific activation of host endothelium and guide vessel ingrowth. Vascular endothelial growth factor (VEGF) is a potent angiogenic stimulator, and if released in a controlled manner it may enhance and guide scaffold vascularization. Therefore, the aim of this work was to realize a scaffold with integrated depots able to release VEGF in a controlled rate and assess the ability of this scaffold to promote angiogenesis. VEGF-loaded poly(lactide-co-glycolide) (PLGA) microspheres were produced and included in a collagen scaffold. The release of VEGF from microspheres was tailored to be sustained over several weeks and occurred at a rate of approximately 0.6 ng/day per mg of microspheres. It was found that collagen scaffolds bioactivated with VEGF-loaded microspheres strongly enhanced endothelial cell activation and vascular sprouting both in vitro and in vivo as compared with a collagen scaffold bioactivated with free VEGF. This report demonstrates that by finely tuning VEGF release rate within a polymeric scaffold, sprouting of angiogenic vessels can be guided within the scaffolds interstices as well as broadcasted from the host tissues.

Functional porous hydrogels to study angiogenesis under the effect of controlled release of vascular endothelial growth factor

Angiogenesis occurs through a cascade of events controlled by complex multiple signals that are orchestrated according to specific spatial patterns and temporal sequences. Vascularization is a central issue in most tissue engineering applications. However, only a better insight into spatio-temporal signal presentation can help in controlling and guiding angiogenesis in vivo. To this end, versatile and accessible material platforms are required in order to study angiogenic events in a systematic way. In this work we report a three-dimensional porous polyethylene glycol (PEG) diacrylate hydrogel bioactivated with heparin that is able to deliver vascular endothelial growth factor (VEGF) in a sustained and controlled manner. The efficiency of the material has been tested both in vitro and in vivo. In particular, the VEGF released from the hydrogel induces cell proliferation when tested on HUVECs, retains its bioactivity up to 21days, as demonstrated by Matrigel assay, and, when implanted on a chorion allantoic membrane, the hydrogel shows superior angiogenic potential in stimulating new vessel formation compared with unfunctionalized hydrogels. Moreover, in the light of potential tissue regeneration studies, the proposed hydrogel has been modified with adhesion peptides (RGD) to enable cell colonization. The porous hydrogel reported here can be used as a valid tool to characterize angiogenesis, and, possibly, other biological processes, in different experimental set-ups.

Engineering strategies to control vascular endothelial growth factor stability and levels in a collagen matrix for angiogenesis: The role of heparin sodium salt and the PLGA-based microsphere approach

New vessel formation is the result of the complex orchestration of various elements, such as cells, signalling molecules and extracellular matrix (ECM). In order to establish the suitable conditions for an effective cell response, the influence of vascular endothelial growth factor (VEGF) complexation with heparin sodium salt (Hp) on its pro-angiogenic activity has been evaluated by an in vitro capillary-like tube formation assay. VEGF with or without Hp was embedded into collagen gels, and the activated matrices were characterized in terms of VEGF activity and release kinetics. Taking into account the crucial role of Hp in VEGF stability and activity, VEGF/Hp complex was then encapsulated into microspheres based on poly(lactide-co-glycolide) (PLGA), and microsphere properties, VEGF/Hp release kinetics and VEGF in vitro activity over time were evaluated. Integrated microsphere/collagen matrices were developed in order to provide a continuous release of active VEGF/Hp inside the matrix but also a VEGF gradient at the boundary, which is an essential condition for endothelial cell attraction and scaffold invasion. The results confirmed a strong influence of Hp on VEGF configuration and, consequently, on its activity, while the encapsulation of VEGF/Hp complex in PLGA-microspheres guaranteed a sustained release of active VEGF for more than 30days. This paper confirms the importance of VEGF stability and signal presentation to cells for an effective proangiogenic activity and highlights how the combination of two stabilizing approaches, namely VEGF/Hp complexation and entrapment within PLGA-based microspheres, may be a very effective strategy to achieve this goal.

Preliminary focus on the mechanical and antibacterial activity of a PMMA-based bone cement loaded with gold nanoparticles

In total knee arthroplasty (TKA) and total hip replacement (THR) the restoration of the normal joint function represents a fundamental feature. A prosthetic joint must be able to provide motions and to transmit functional loads. As reported in the literature, the stress distribution may be altered in bones after the implantation of a total joint prosthesis. Some scientific works have also correlated uncemented TKA to a progressive decrease of bone density below the tibial component. Antibiotic-loaded bone cements are commonly employed in conjunction with systemic antibiotics to treat infections. Furthermore, nanoparticles with antimicrobial activity have been widely analysed. Accordingly, the current research was focused on a preliminary analysis of the mechanical and antibacterial activity of a PMMA-based bone cement loaded with gold nanoparticles. The obtained results demonstrated that nanocomposite cements with a specific concentration of gold nanoparticles improved the punching performance and antibacterial activity. However, critical aspects were found in the optimization of the nanocomposite bone cement.

Optimization of Bicomponent Electrospun Fibers for Therapeutic Use: Post-Treatments to Improve Chemical and Biological Stability

Bicomponent electrospun nanofibers based on the combination of synthetic (i.e., aliphatic polyesters such as polycaprolactone (PCL)) and natural proteins (i.e., gelatin) have been extensively investigated as temporary platforms to instruct cells by the release of molecular/pharmaceutical signals for the regeneration of several tissues. Here, water soluble proteins (i.e., gelatin), strictly embedded to PCL, act as carriers of bioactive molecules, thus improving bioavailability and supporting cell activities during in vitro regeneration. However, these proteins are rapidly digested by enzymes, locally produced by many different cell types, both in vitro and in vivo, with significant drawbacks in the control of molecular release. Hence, we have investigated three post-processing strategies based on the use of different crosslinking agents—(1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride) (EDC), glyceraldehyde (GC), and 1,4-butanediol diglycidyl ether (BDDGE)—to delay the dissolution time of gelatin macromolecules from bicomponent fibers. All of the qualitative (i.e., SEM, TGA) and quantitative (i.e., Trinitrobenzene sulfonate (TNBS) and bicinchoninic acid (BCA) assays) morphological/chemical analyses as well as biocompatibility assays indicate that EDC crosslinking improves the chemical stability of bicomponent fibers at 37 °C and provides a more efficient encapsulation and controlled sustained release of drug, thus resulting in the best post-treatment to design bio-inspired fibrous platforms for the extended in vitro release of drugs.

Effect of topical antiinflammatory drugs on mechanical behavior of rabbit cornea

Background A variety of antiinflammatory therapies are employed to promote corneal wound healing. The effects of steroidal and nonsteroidal antiinflammatory drugs on the biomechanical properties of rabbit cornea were investigated over time using tensile tests. Methods Full-thickness incisions were made and used to analyze the effects of dexamethasone sodium phosphate 0.1% and diclofenac sodium 0.1% on corneal biomechanical properties during wound healing at 7, 14 and 21 days after surgery. Results The full-thickness incision deeply modified all of the mechanical properties. At 3 weeks after incision, regardless of the drug therapy, the tensile modulus was about 70% of the value for the intact cornea. Conclusions Topical treatment with dexamethasone was particularly effective during the first week after surgery; the second week after surgery, a similar result was observed in the corneas treated with diclofenac. Low doses of steroidal and nonsteroidal antiinflammatory drugs would seem to have the potential to improve biomechanical properties only during the early stage of the healing process of the cornea.

Optimization of protein cross-linking in bicomponent electrospun scaffolds for therapeutic use

Bio-instructive electrospun scaffolds based on the combination of synthetic polymers, such as PCL or PLLA, and natural polymers (e.g., collagen) have been extensively investigated as temporary extracellular matrix (ECM) analogues able to support cell proliferation and stem cell differentiation for the regeneration of several tissues. The growing use of natural polymers as carrier of bioactive molecules is introducing new ideas for the design of polymeric drug delivery systems based on electrospun fibers with improved bioavailability, therapeutic efficacy and programmed drug release. In particular, the release mechanism is driven by the use of water soluble proteins (i.e., collagen, gelatin) which fully degrade in in vitro microenvironment, thus delivering the active principles. However, these protein are generally rapidly digested by enzymes (i.e., collagenase) produced by many different cell types, both in vivo and in vitro with significant drawbacks in tissue engineering and controlled drug delivery. He...