Omotola O. Ogunsolu

Pronounced Photovoltaic Response from Multilayered Transition-Metal Dichalcogenides PN-Junctions

Transition metal dichalcogenides (TMDs) are layered semiconductors with indirect band gaps comparable to Si. These compounds can be grown in large area, while their gap(s) can be tuned by changing their chemical composition or by applying a gate voltage. The experimental evidence collected so far points toward a strong interaction with light, which contrasts with the small photovoltaic efficiencies η ≤ 1% extracted from bulk crystals or exfoliated monolayers. Here, we evaluate the potential of these compounds by studying the photovoltaic response of electrostatically generated PN-junctions composed of approximately 10 atomic layers of MoSe2 stacked onto the dielectric h-BN. In addition to ideal diode-like response, we find that these junctions can yield, under AM-1.5 illumination, photovoltaic efficiencies η exceeding 14%, with fill factors of ~70%. Given the available strategies for increasing η such as gap tuning, improving the quality of the electrical contacts, or the fabrication of tandem cells, our study suggests a remarkable potential for photovoltaic applications based on TMDs.

Inhibiting Interfacial Recombination Events in Dye-Sensitized Solar Cells using Self-Assembled Bilayers

The rate and efficiency of electron transfer events at the semiconductor-dye-electrolyte interface is of critical importance to the overall performance of dye-sensitized solar cells (DSSCs) and dye-sensitized photoelectrosynthesis cells. In this work, we introduce self-assembled bilayers composed of a metal oxide electrode, bridging molecules, linking ions, and dye as an effective strategy to manipulate interfacial electron transfer events at the photoanode of DSSCs. Spectroelectrochemical measurements including current-voltage, incident photon-to-current efficiency, and electrochemical impedance spectroscopy are used to quantify interfacial electron transfer and transport events with respect to the length of the bridging molecules. The general trend in increased lifetime and diffusion length in TiO2 as well as an increase in open circuit voltage with bridge length indicate that the bilayer is an effective strategy in inhibiting the TiO2(e(-)) to redox mediator recombination events. However, the increased separation between the dye and the semiconductor also reduces the electron injection rate resulting in a decrease in photocurrent as the bridge length increases. The observed enhancement in open circuit voltages are far outweighed by the significant decrease in photocurrent and thus overall device performance decreases with increasing bridge length.

Energy and Electron Transfer Cascade in Self-Assembled Bilayer Dye-Sensitized Solar Cells

Current high efficiency dye-sensitized solar cells (DSSCs) rely on the incorporation of multiple chromophores, via either codeposition or preformed assemblies, as a means of increasing broad band light absorption. These strategies have some inherent limitations including decreased total light absorption by each of the dyes, low surface loadings, and complex synthetic procedures. In this report, we introduce an alternative strategy, self-assembled bilayers, as a simple, stepwise method of incorporating two complementary chromophores into a DSSC. The bilayer devices exhibit a 10% increase in Jsc, Voc, and η over the monolayer devices due to increased incident photon-to-electron conversion efficiency across the entire visible spectrum and slowed recombination losses at the interface. Directional energy and electron transfer toward the metal oxide surface are key steps in the bilayer photon-to-current generation process. These results are important as they open the door to a new architecture for harnessing broadband light in dye-sensitized devices.

Self-Assembled Bilayers on Nanocrystalline Metal Oxides: Exploring the Non-Innocent Nature of the Linking Ions

Self-assembled bilayers on nanocrystalline metal oxide films are an increasingly popular strategy for modulating electron and energy transfer at dye-semiconductor interfaces. A majority of the work to date has relied on ZrII and ZnIV linking ions to assemble the films. In this report, we demonstrate that several different cations (CdII, CuII, FeII, LaIII, MnII, and SnIV) are not only effective in generating the bilayer assemblies but also have a profound influence on the stability and photophysical properties of the films. Bilayer films with ZrIV ions exhibited the highest photostability on both TiO2 and ZrO2. Despite the metal ions having a minimal influence on the absorption/emission energies and oxidation potentials of the dye, bilayers composed of CuII, FeII, and MnII exhibit significant excited-state quenching. The excited-state quenching decreases the electron injection yield but also, for CuII and MnII bilayers, significantly slows the back electron transfer kinetics.

Increasing the Open-Circuit Voltage of Dye-Sensitized Solar Cells via Metal-Ion Coordination

Considerable efforts are dedicated to increasing the open-circuit voltage (Voc) of dye-sensitized solar cells (DSSCs) by slowing charge recombination dynamics using atomic layer deposition, alkyl-substituted dyes, coadsorbents, and other strategies. In this report, we introduce metal-ion coordination to a metal oxide bound dye as an alternative means of increasing Voc. Metal-ion coordination has minimal influence on the photophysical and electrochemical properties of the N3 dye, but presumably because of increased steric hindrance at the interface, it slows charge recombination kinetics and increases Voc by upwards of 130 mV relative to the parent N3 DSSC. With respect to the nature of the metal ion, the trend in decreasing short-circuit current (Jsc) and increasing Voc correlates with the charge of the coordinated metal ion (MIV → MIII → MII). We attribute this trend to electrostatic interactions between the metal cation and I- or I3-, with the more highly charged cations maintaining a higher concentration of mediator anions in proximity to the surface and, as a result, increasing the regeneration and recombination rates.