Onofrio Scialdone

Single and Coupled Electrochemical Processes and Reactors for the Abatement of Organic Water Pollutants: A Critical Review

Traditional physicochemical and biological techniques, as well as advanced oxidation processes (AOPs), are often inadequate, ineffective, or expensive for industrial water reclamation. Within this context, the electrochemical technologies have found a niche where they can become dominant in the near future, especially for the abatement of biorefractory substances. In this critical review, some of the most promising electrochemical tools for the treatment of wastewater contaminated by organic pollutants are discussed in detail with the following goals: (1) to present the fundamental aspects of the selected processes; (2) to discuss the effect of both the main operating parameters and the reactor design on their performance; (3) to critically evaluate their advantages and disadvantages; and (4) to forecast the prospect of their utilization on an applicable scale by identifying the key points to be further investigated. The review is focused on the direct electrochemical oxidation, the indirect electrochemical oxidation mediated by electrogenerated active chlorine, and the coupling between anodic and cathodic processes. The last part of the review is devoted to the critical assessment of the reactors that can be used to put these technologies into practice.

Electrochemical oxidation of organics in water: Role of operative parameters in the absence and in the presence of NaCl

The electrochemical oxidation of organics in water was investigated theoretically and experimentally to determine the role of several operative parameters on the performances of the process in the presence and in the absence of sodium chloride. Theoretical considerations were used to design the experimental investigation and were confirmed by the results of the electrochemical oxidation of oxalic acid (OA) at boron doped diamond (BDD) or IrO(2)-Ta(2)O(5) (DSA-O(2)) anodes in a continuous batch recirculation reaction system equipped with a parallel plate undivided electrochemical cell. Polarization curves and chronoamperometric measurements indicated that, in the presence of chlorides, the anodic oxidation of OA is partially replaced by an indirect oxidation process. This result was confirmed by electrolyses experiments that show that, in the presence of suitable amount of chlorides, oxidation of OA takes place mainly by a homogeneous process. Interestingly, a very different influence of the nature of the anodic material, the flow rate and the current density on the performances of the process arises in the absence and in the presence of chlorides so that optimization of the two processes requires very different operative conditions. In the absence of chlorides, high current efficiency (CE) is obtained at BDD when most part of the process is under charge transfer controlled kinetics, i.e. when low current densities and high flow rates are imposed. On the other hand, in the presence of NaCl, higher CE are generally obtained at DSA anode when high current densities and low flow rates are imposed, i.e. when a high concentration of chemical oxidants is obtained as a result of the chloride oxidation. The effect of other operative parameters such as the OA concentration and the pH were further investigated.

Comparative electrochemical treatments of two chlorinated aliphatic hydrocarbons. Time course of the main reaction by-products

Acidic aqueous solutions of the chlorinated aliphatic hydrocarbons 1,2-dichloroethane (DCA) and 1,1,2,2-tetrachloroethane (TCA) have been treated by the electro-Fenton (EF) process. Bulk electrolyses were performed at constant current using a BDD anode and an air diffusion cathode able to generate H(2)O(2) in situ, which reacts with added Fe(2+) to yield OH from Fentons reaction. At 300 mA, almost total mineralization was achieved at 420 min for solutions containing 4mM of either DCA or TCA. Comparative treatments without Fe(2+) (anodic oxidation) or with a Pt anode led to a poorer mineralization. The better performance of the EF process with BDD is explained by the synergistic action of the oxidizing radicals, BDD(OH) at the anode surface and OH in the bulk, and the minimization of diffusional limitations. The decay of the initial pollutant accomplished with pseudo first-order kinetics. Chloroacetic and dichloroacetic acids were the major by-products during the degradation of DCA and TCA, respectively. Acetic, oxalic and formic acids were also identified. The proposed reaction pathways include oxidative and reductive (cathodic) dechlorination steps. Chlorine was released as Cl(-), being further oxidized to ClO(3)(-) and, mostly, to ClO(4)(-), due to the action of the largely generated BDD(OH) and OH.

A new simple static method for the determination of solubilities of condensed compounds in supercritical fluids

Abstract A simple static method based on gravimetric measurements has been adopted to measure the solubility of benzenecarboxylic acid, 2-hydroxy-benzenecarboxylic acid, 4-hydroxy-benzenecarboxylic acid and 1,8-dihydroxyanthraquinone along several isotherms in the temperature range 318–357 K and the pressure interval 7–23 MPa. Solubility data have been correlated with the Zieger–Eckert approach, using the Fedor atomic and group contribution method to estimate the solubility parameter and the molar volume of the solutes. A good agreement was obtained between data reported in the literature and those determined using the proposed method which allows one to measure solubility mole fraction as low as 10 −5 . Provided that a suitable analytical technique is adopted the method can be extended also to multicomponent systems.

Mapping concentration profiles within the diffusion layer of an electrode: application to redox catalysis.

Lipid-modified proteins play decisive roles in important biological processes such as signal transduction, organization of the cytoskeleton, and vesicular transport. Lipidated peptides embodying the characteristic partial structures of their parent lipidated proteins and semisynthetic proteins synthesized from such peptides are valuable tools for the study of these biological phenomena. We have developed an efficient synthesis strategy that allows for the synthesis of long multiply lipidated peptides embodying various side chain functional groups. The strategy was successfully applied in the synthesis of the N-terminal undetrigintapeptide of endothelial NO-synthase and related lipopeptides. Key elements of the synthesis strategy are the combined use of the enzyme-labile para-phenylacetoxybenzyloxycarbonyl (PhAcOZ) urethane as N-terminal blocking group, the Pd0-sensitive allyl ester as C-terminal protecting function and acid-labile side chain protecting groups for solution-phase synthesis of labile S-palmitoylated building blocks under the mildest conditions with solid-phase techniques and solution-phase fragment condensations. The successful synthesis of the triply lipidated 29-mer eNOS peptide convincingly demonstrates the full capacity of the protecting group methods.

Integrated production of fresh water, sea salt and magnesium from sea water

Abstract Seawater desalination is becoming an important source of fresh water in several countries all around the world. One of the main drawbacks of desalination processes, however, is related to the disposal of large quantities of concentrated brine, which is an always-present by-product of the process. An integrated production of fresh water and salts may be achieved using the discharge brine from a desalination plant as a feed for conventional salt ponds, with the advantages of using brine more concentrated than sea water and, in the case of thermal desalination plants, warmer than sea water. By doing so, the process is faster as a consequence of the enhancement of evaporation rate on the surface of ponds. The above concept has been proposed already several years ago, but only rare examples exist of real applications. A pilot test has been performed in the last 4 years in Trapani (Italy), where a 36,000-m3/d multiple effects desalination with thermal vapour compression plant is operating very close to...

Catalytic systems based on transition metals for the carbonylation of methanol to dimethylcarbonate

Abstract The results of an investigation on catalytic systems arising from the electrochemical activation of salts and complexes of several transition metals for the carbonylation of methanol to dimethylcarbonate (DMC) are reported. Metals were tested as inorganic salts or complexes with ligands such as 2,2′-bipyridine (bipy), 1,6-bis (2-oxyphenyl)-2,5-diaza-1,5-hexadiene (salen), 2,4-pentanedionate (acac), triphenylphosphine (TPP) in methanol at room temperature saturated with carbon monoxide at atmospheric pressure. Best faradic yields vs DMC were observed as follows: CuCl(bipy): 84.8%; PdCl 2 (bipy): 64.0%; CoCl 2 : 26.0%; RhCl 3 : 25.0%; AgBF 4 (bipy): 10.2%; AuCl 3 : 9.4%; Cr(acac) 3 : 6.7%; PtCl 2 (bipy): 2.1%; NiCl 2 : 1.8%. The influence of the ligand on faradic yields has been also investigated.

A one-pot method to enhance dissolution rate of low solubility drug molecules using dispersion polymerization in supercritical carbon dioxide

The surfactant assisted polymerization of 1-vinyl-2-pyrrolidone in supercritical carbon dioxide in the presence of Piroxicam, selected as a model of a low aqueous solubility drug, was studied in order to prepare in a single step a polymeric composite to enhance the rate of dissolution of the pharmaceutical compound. Reactive entrapping was carried out at 65 degrees C in the P range 21-38MPa. Under proper operative conditions we obtained the composite under the form of sub-micron spherical particles with relatively narrow particle size distribution. Drug loadings higher than 12% (w/w) were obtained and XRD and Raman spectroscopy suggest that the anti-inflammatory agent is dispersed in the matrix with a non-crystalline structure. The dissolution rate of the drug from the composites was significantly faster both than that of the pure compound and of its physical mixture with the polymer. Collected results suggest that the proposed one-pot process can be used to prepare polymer based composites to increase bioavailability of low solubility drugs without utilization of toxic solvents and under mild temperature conditions.

Electrochemical Oxidation of Carboxylic Acids in Water at Boron-Doped Diamond (BDD) Anodes in the Range of Potential of Oxygen Evolution: Detection Measurements and Studies on the Reaction Mechanism

The electrochemical oxidation in water solutions of selected carboxylic acids (namely oxalic, formic, acetic, maleic, and succinic) at boron-doped diamond (BDD) anodes was investigated by polarization and chronoamperometric measurements. In the presence of low concentrations of carboxylic acids, current densities changed approximately linearly with the acid concentrations. Furthermore, when the current densities were plotted as a function of the chemical oxygen demand, a similar response was observed for all the investigated acids with the exception of oxalic acid. For high carboxylic acid concentrations, the linear variation is often loosen and different behaviors are observed depending on the nature of the acid and on the value of the applied working potential. Smaller increases of current densities were observed in water solutions of NaCl as a result of the chlorides oxidation to active chlorine. The effect of pH, boron doping level, BDD pretreatment, and of the nature of the supporting electrolyte on the amperometric response of carboxylic acids was also studied in detail. Some theoretical considerations were briefly presented in order to rationalize the observed behaviors.

Robust Mesoporous CoMo/γ-Al2O3 Catalysts from Cyclodextrin-Based Supramolecular Assemblies for Hydrothermal Processing of Microalgae: Effect of the Preparation Method

Hydrothermal liquefaction (HTL) is a promising technology for the production of biocrude oil from microalgae. Although this catalyst-free technology is efficient under high-temperature and high-pressure conditions, the biocrude yield and quality can be further improved by using heterogeneous catalysts. The design of robust catalysts that preserve their performance under hydrothermal conditions will be therefore very important in the development of biorefinery technologies. In this work, we describe two different synthetic routes (i.e., impregnation and cyclodextrin-assisted one-pot colloidal approach), for the preparation in aqueous phase of six high surface area CoMo/γ-Al2O3 catalysts. Catalytic tests performed on the HTL of Nannochloropsis gaditana microalga indicate that solids prepared by the one-pot colloidal approach show higher hydrothermal stability and enhanced biocrude yield with respect to the catalyst-free test. The positive effect of the substitution of the block copolymer Tetronic T90R4 for Pluronic F127 in the preparation procedure was evidenced by diffuse reflectance UV-visible spectroscopy, X-ray diffraction, N2-adsorption-desorption, and H2-temperature-programmed reduction measurements and confirmed by the higher quality of the obtained biocrude, which exhibited lower oxygen content and higher-energy recovery equal to 62.5% of the initial biomass.