Ou Zhao

Experimental and Numerical Studies of Ferritic Stainless Steel Tubular Cross Sections under Combined Compression and Bending

AbstractAn experimental and numerical study of ferritic stainless steel tubular cross sections under combined loading is presented in this paper. Two square hollow section (SHS) sizes—SHS 40×40×2 and SHS 50×50×2 made of Grade EN 1.4509 (AISI 441) stainless steel—were considered in the experimental program, which included 2 concentrically loaded stub column tests, 2 four-point bending tests, and 14 eccentrically loaded stub column tests. In parallel with the experimental investigation, a finite-element (FE) study was also conducted. Following validation of the FE models against the test results, parametric analyses were carried out to generate further structural performance data. The experimental and numerical results were analyzed and compared with the design strengths predicted by the current European stainless steel design code EN 1993-1-4 and American stainless steel design specification SEI/ASCE-8. The comparisons revealed that the codified capacity predictions for ferritic stainless steel cross secti...

Experimental Study of Ferritic Stainless Steel Tubular Beam-Column Members Subjected to Unequal End Moments

AbstractThis paper presents a comprehensive experimental study of the buckling behavior of ferritic stainless steel tubular section beam-column structural members subjected to unequal end moments. Testing was carried out on two cold-formed and seam-welded cross sections—one rectangular hollow section (RHS) 100×40×2 and one square hollow section (SHS) 60×60×3 made of grade AISI 410 (EN 1.4003) stainless steel. The experimental investigation included a series of material tensile coupon tests, initial local and global geometric imperfection measurements and 24 beam-column tests under unequal end moments. The experimental setup and procedures are described, and the test observations, including the key test results, the load-deformation histories, and the failure modes, are fully reported. The experimental results were carefully analyzed and then compared with the design strength predictions determined according to the current European code, American specification, and Australian/New Zealand standard for stain...