Ozal Mutlu

Genotoxic effects of boric acid and borax in zebrafish, Danio rerio using alkaline comet assay.

The present study is conducted to determine the potential mechanisms of Boron compounds, boric acid (BA) and borax (BX), on genotoxicity of zebrafish Danio rerio for 24, 48, 72 and 96-hours acute exposure (level:1, 4, 16, 64 mg/l BA and BX) in semi-static bioassay experiment. For that purpose, peripheral erythrocytes were drawn from caudal vein and Comet assay was applied to assess genotoxicity. Acute (96 hours) exposure and high concentrations of boric acid and borax increases % tail DNA and Olive tail moment. Genotoxicity was found for BA as concentration-dependent and BX as concentration and time dependent manner. In general, significant effects (P < 0,05) on both concentrations and exposure times were observed in experimental groups. DNA damage was highest at 96 h and 24 h for all BX and BA concentrations, respectively in peripheral blood of D. rerio. For the first time, our study demonstrates the effect of waterborne BA and BX exposure on genotoxicity at the molecular level, which may contribute to understanding the mechanism of boric acid and borax-induced genotoxicity in fish.

Effect of Zr, Nb and Ti addition on injection molded 316L stainless steel for bio-applications: Mechanical, electrochemical and biocompatibility properties.

The research investigated the effect of Zr, Nb and Ti additions on mechanical, electrochemical properties and biocompatibility of injection molded 316L stainless steel. Addition of elemental powder is promoted to get high performance of sintered 316L stainless steels. The amount of additive powder plays a role in determining the sintered microstructure and all properties. In this study, 316L stainless steel powders used with the elemental Zr, Nb and Ti powders. A feedstock containing 62.5 wt% powders loading was molded at different injection molded temperature. The binders were completely removed from molded components by solvent and thermal debinding at different temperatures. The debinded samples were sintered at 1350°C for 60 min. Mechanical, electrochemical property and biocompatibility of the sintered samples were performed mechanical, electrochemical, SBF immersion tests and cell culture experiments. Results of study showed that sintered 316L and 316L with additives samples exhibited high corrosion properties and biocompatibility in a physiological environment.

Comprehensive structural analysis of the open and closed conformations of Theileria annulata enolase by molecular modelling and docking

Theileria annulata is an apicomplexan parasite which is responsible for tropical theileriosis in cattle. Due to resistance of T. annulata against commonly used antitheilerial drug, new drug candidates should be identified urgently. Enolase might be a druggable protein candidate which has an important role in glycolysis, and could also be related to several cellular functions as a moonlight protein. In this study; we have described three-dimensional models of open and closed conformations of T. annulata enolase by homology modeling method for the first time with the comprehensive domain, active site and docking analyses. Our results show that the enolase has similar folding patterns within enolase superfamily with conserved catalytic loops and active site residues. We have described specific insertions, possible plasminogen binding sites, electrostatic potential surfaces and positively charged pockets as druggable regions in T. annulata enolase.

Cloning, expression and characterization of the gene encoding the enolase from Fusobacterium nucleatum

The gene encoding enolase from Fusobacterium nucleatum (FnENO) was cloned and analyzed for the first time. The gene comprises of 1302 nucleotide base pairs and encodes 433 amino acids. The gene sequence alignment demonstrated the presence of several distinct insertions and deletions, compared with the human enzyme. The gene for recombinant FnENO was inserted into the pLATE 31 vector system and expressed in E. coli BL21(DE3) cells as a soluble protein. The protein was purified by affinity chromatography using a Ni-NTA agarose matrix and shown on SDS-PAGE to be a 46 kDa protein. The molecular weight of the octameric form of the purified recombinant protein was determined as being 375 kDa by size exclusion chromatography. Optimal enzyme activity was observed at pH 8.5 and the enzyme remained stable at a range of different temperatures from 30 to 60°C. Using 2-phosphoglyceric acid as substrate for the purified enzyme, KM, kcat and kcat/KM were determined as 0.48 mM, 20.4 s–1 and 4.22 × 104 M–1s–1, respectively. Potential drug binding sites of FnENO were detected using homology modeling. These data could facilitate the design of new inhibitors of F. nucleatum which has already been shown to be resistant to several known antibiotics.

In silico molecular modeling and docking studies on the leishmanial tryparedoxin peroxidase

Leishmaniasis is one of the most common form of neglected parasitic disease that affects about 350 million people worldwide. Leishmanias have a trypanothione mediated hydroperoxide metabolism to eliminate endogenous or exogenous oxidative agents. Both of 2-Cys peroxiredoxin (Prx) and glutathione peroxidase type tryparedoxin peroxidase (Px) are the terminal enzymes in the trypanothione dependent detoxification system. Therefore absence of trypanothione redox system in mammals and the sensitivity of trypanosomatids against oxidative stress, enzymes of this pathway are drug targets candidates. In this study, 3D structure of tryparedoxin peroxidase (2-Cys peroxiredoxin type) from Leishmania donovani (LdTXNPx) was described by homology modeling method based on the template of tryparedoxin peroxidase from Crithidia fasciculata and selected compounds were docked to the active site pocket. The quality of the 3D structure of the model was confirmed by various web based validation programs. When compared secondary and tertiary structure of the model, it showed a typical thioredoxin fold containing a central beta-sheet and three alpha-helices. Docking study showed that the selected compound 2 (CID 16073813) interacted with the active site amino acids and binding energy was -118.675 kcal/mol.

Introduction of novel thermostable α-amylases from genus Anoxybacillus and proposing to group the Bacillaceae related α-amylases under five individual GH13 subfamilies

Among the thermophilic Bacillaceae family members, α-amylase production of 15 bacilli from genus Anoxybacillus was investigated, some of which are biotechnologically important. These Anoxybacillus α-amylase genes displayed ≥ 91.0% sequence similarities to Anoxybacillus enzymes (ASKA, ADTA and GSX-BL), but relatively lower similarities to Geobacillus (≤ 69.4% to GTA, Gt-amyII), and Bacillus aquimaris (≤ 61.3% to BaqA) amylases, all formerly proposed only in a Glycoside Hydrolase 13 (GH13) subfamily. The phylogenetic analyses of 63 bacilli-originated protein sequences among 93 α-amylases revealed the overall relationships within Bacillaceae amylolytic enzymes. All bacilli α-amylases formed 5 clades different from 15 predefined GH13 subfamilies. Their phylogenetic findings, taxonomic relationships, temperature requirements, and comparisonal structural analyses (including their CSR-I-VII regions, 12 sugar- and 4 calcium-binding sites, presence or absence of the complete catalytic machinery, and their currently unassigned status in a valid GH13 subfamiliy) revealed that these five GH13 α-amylase clades related to familly share some common characteristics, but also display differentiative features from each other and the preclassified ones. Based on these findings, we proposed to divide Bacillaceae related GH13 subfamilies into 5 individual groups: the novel a2 subfamily clustered around α-amylase B2M1-A (Anoxybacillus sp.), the a1, a3 and a4 subfamilies (including the representatives E184aa-A (Anoxybacillus sp.), ATA (Anoxybacillus tepidamans), and BaqA,) all of which were composed from the division of the previously grouped single subfamily around α-amylase BaqA, and the undefinite subfamily formerly defined as xy including Bacillus megaterium NL3.

Experimentation and Analysis of Powder Injection Molded Ti10Nb10Zr Alloy: A Promising Candidate for Electrochemical and Biomedical Application

This paper describes the microstructural, mechanical and corrosion properties of injection molded Ti10Nb10Zr alloys. Ti10Nb10Zr powder was injection molded with wax-based binder. The critical powder loading for injection molding was 55 vol% for feedstock. Binder debinding was performed in solvent and thermal method. After debinding the samples were sintered at different temperatures and times in vacuum atmosphere (10−5 mbar) to obtain fully dense parts. Metallographic studies were conducted to determine the extent of densification and the corresponding microstructural changes. The electrochemical property and biocompatibility of the sintered samples were performed electrochemically, by selfbody-fluid immersion tests and cell culture experiments. The results show that Ti10Nb10Zr alloys could be sintered to a maximum 99% of theoretical density. Maximum ultimate tensile strength, elongation and hardness obtained were 748 MPa, 14.3 and 114 HRB respectively at 1500 C for 3 h. Additionally, the sintered Ti10Nb10Zr alloys exhibited high mechanical and corrosion properties in a physiological environment.

Computational insight into the phthalocyanine-DNA binding via docking and molecular dynamics simulations

Phthalocyanines are considered as good DNA binders, which makes them promising anti-tumor drug leads. The purpose of this study is to investigate the interactions between DNA and quaternary metallophthalocyanine derivatives (Q-MPc) possessing varying metals (M = Zn, Ni, Cu, Fe, Mg and Ca) by molecular docking since there seems to be a lack of information in the literature regarding this issue. In this direction, Autodock Vina and Molegro Virtual Docker programs were employed. Autodock Vina results reveal that each Q-MPc derivative binds to DNA strongly with similar binding energies and almost identical binding modes. They bind to the grooves of DNA by constituting favorable interactions between phosphate groups of DNA and Q-MPcs. Although changing the metal has no significant effect on binding, presence of quaternary amine substituents increases the binding constant Kb by about 2-fold comparing to the core Pc (ZnPc). Contrary to Autodock Vina, the calculated Molegro Virtual Docker binding scores have been more diverse indicating that the scoring function of Molegro is better in differentiating these metals. Despite the fact that Molegro is superior to Autodock Vina in terms of metal characterization, Autodock Vina and Molegro exhibit similar binding sites for the studied metallophthalocyanines. We propose that Q-MPc derivatives designed in this study are promising anti-tumor lead compounds since they tightly bind to DNA with considerably high Kb values. Cationic substituents and presence of metal have both positive effects on DNA binding which is critical for designing DNA-active drugs. Additional calculations employing molecular dynamics (MD) simulations verified the stability of Q-MPc-DNA complexes which remained in contact after 20 ns via attractive interactions mainly between DNA backbone and the Pc metal center.

Functional and structural characterization of the pentapeptide insertion of Theileria annulata lactate dehydrogenase by site-directed mutagenesis, comparative modeling and molecular dynamics simulations

Lactate dehydrogenase (LDH) is an important metabolic enzyme in glycolysis and it has been considered as the main energy source in many organisms including apicomplexan parasites. Differences at the active site loop of the host and parasite LDHs makes this enzyme an attractive target for drug inhibitors. In this study, five amino acid insertions in the active site pocket of Theileria annulata LDH (TaLDH) were deleted by PCR-based site-directed mutagenesis, expression and activity analysis of mutant and wild type TaLDH enzymes were performed. Removal of the insertion at the active site loop caused production of an inactive enzyme. Furthermore, structures of wild and mutant enzymes were predicted by comparative modeling and the importance of the insertions at the active site loop were also assigned by molecular docking and dynamics simulations in order to evaluate essential role of this loop for the enzymatic activity. Pentapeptide insertion removal resulted in loss of LDH activity due to deletion of Trp96 and conformational change of Arg98 because of loop instability. Analysis of wild type and mutant enzymes with comparative molecular dynamics simulations showed that the fluctuations of the loop residues increase in mutant enzyme. Together with in silico studies, in vitro results revealed that active site loop has a vital role in the enzyme activity and our findings promise hope for the further drug design studies against theileriosis and other apicomplexan parasite diseases.

Single Mutation in Shine-Dalgarno-Like Sequence Present in the Amino Terminal of Lactate Dehydrogenase of Plasmodium Effects the Production of an Eukaryotic Protein Expressed in a Prokaryotic System

One of the most important step in structure-based drug design studies is obtaining the protein in active form after cloning the target gene. In one of our previous study, it was determined that an internal Shine-Dalgarno-like sequence present just before the third methionine at N-terminus of wild type lactate dehydrogenase enzyme of Plasmodium falciparum prevent the translation of full length protein. Inspection of the same region in P. vivax LDH, which was overproduced as an active enzyme, indicated that the codon preference in the same region was slightly different than the codon preference of wild type PfLDH. In this study, 5′-GGAGGC-3′ sequence of P. vivax that codes for two glycine residues just before the third methionine was exchanged to 5′-GGAGGA-3′, by mimicking P. falciparum LDH, to prove the possible effects of having an internal SD-like sequence when expressing an eukaryotic protein in a prokaryotic system. Exchange was made by site-directed mutagenesis. Results indicated that having two glycine residues with an internal SD-like sequence (GGAGGA) just before the third methionine abolishes the enzyme activity due to the preference of the prokaryotic system used for the expression. This study emphasizes the awareness of use of a prokaryotic system to overproduce an eukaryotic protein.