Özlem Alptekin

Covalent immobilization of catalase onto spacer-arm attached modified florisil: characterization and application to batch and plug-flow type reactor systems.

Catalase was covalently immobilized onto florisil via glutaraldehyde (GA) and glutaraldehyde+6-amino hexanoic acid (6-AHA) (as a spacer arm). Immobilizations of catalase onto modified supports were optimized to improve the efficiency of the overall immobilization procedures. The V(max) values of catalase immobilized via glutaraldehyde (CIG) and catalase immobilized via glutaraldehyde+6-amino hexanoic acid (CIG-6-AHA) were about 0.6 and 3.4% of free catalase, respectively. The usage of 6-AHA as a spacer arm caused about 40 folds increase in catalytic efficiency of CIG-6-AHA (8.3 × 10⁵ M⁻¹ s⁻¹) as compared to that of CIG (2.1 × 10⁴ M⁻¹ s⁻¹). CIG and CIG-6-AHA retained 67 and 35% of their initial activities at 5 °C and 71 and 18% of their initial activities, respectively at room temperature at the end of 6 days. Operational stabilities of CIG and CIG-6-AHA were investigated in batch and plug-flow type reactors. The highest total amount of decomposed hydrogen peroxide (TAD-H₂O₂) was determined as 219.5 μmol for CIG-6-AHA in plug-flow type reactor.

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase.

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.