Pablo Ares

Mechanical Isolation of Highly Stable Antimonene under Ambient Conditions

Antimonene fabricated by mechanical exfoliation is highly stable under atmospheric conditions over periods of months and even when immersed in water. Density functional theory confirms the experiments and predicts an electronic gap of ≈1 eV. These results highlight the use of antimonene for optoelectronics applications.

Few-Layer Antimonene by Liquid-Phase Exfoliation

Abstract We report on a fast and simple method to produce highly stable isopropanol/water (4:1) suspensions of few‐layer antimonene by liquid‐phase exfoliation of antimony crystals in a process that is assisted by sonication but does not require the addition of any surfactant. This straightforward method generates dispersions of few‐layer antimonene suitable for on‐surface isolation. Analysis by atomic force microscopy, scanning transmission electron microscopy, and electron energy loss spectroscopy confirmed the formation of high‐quality few‐layer antimonene nanosheets with large lateral dimensions. These nanolayers are extremely stable under ambient conditions. Their Raman signals are strongly thickness‐dependent, which was rationalized by means of density functional theory calculations.

Minimizing tip-sample forces in jumping mode atomic force microscopy in liquid.

Control and minimization of tip-sample interaction forces are imperative tasks to maximize the performance of atomic force microscopy. In particular, when imaging soft biological matter in liquids, the cantilever dragging force prevents identification of the tip-sample mechanical contact, resulting in deleterious interaction with the specimen. In this work we present an improved jumping mode procedure that allows detecting the tip-sample contact with high accuracy, thus minimizing the scanning forces (-100 pN) during the approach cycles. To illustrate this method we report images of human adenovirus and T7 bacteriophage particles which are prone to uncontrolled modifications when using conventional jumping mode.

Cutting down the forest of peaks in acoustic dynamic atomic force microscopy in liquid

Acoustic dynamic force microscopy in liquids is a fundamental technique for the investigation of biological samples under physiological conditions. However, it shows an important drawback that consists of producing a myriad of resonance peaks, known as the forest of peaks, which hides the natural resonance frequency of the cantilever and prevents an optimum operation of the microscope. In this work, we propose a simple remedy for this problem, which consists on adding a small clay damper to the dither piezoelectric. The resulting frequency spectrum exhibits a single resonance peak that is comparable with the one obtained using magnetic excitation.

Variable-field magnetic force microscopy.

A new variable external field magnetic force microscope is introduced here. The most outstanding feature of the system is its capability to perform stable images under a variable external magnetic field that can be applied both in in-plane and out-of-plane directions. The performances of the microscope are illustrated for four different suitable selected samples: highly oriented pyrolytic graphite, longitudinal magnetic storage media, FePt thin films with in-plane anisotropy and Ni nanowires with axial easy axis embedded on a ceramic matrix. The use of this variable-field magnetic force microscope as a magnetic writing-reading technique is also shown in this contribution.

Recent Progress on Antimonene: A New Bidimensional Material

Antimonene, defined in sensu stricto as a single layer of antimony atoms, is recently the focus of numerous theoretical works predicting a variety of interesting properties and is quickly attracting the attention of the scientific community. However, what places antimonene in a different category from other 2D crystals is its strong spin-orbit coupling and a drastic evolution of its properties from the monolayer to the few-layer system. The recent isolation of this novel 2D material pushes the interest for antimonene even further. Here, a review of both theoretical predictions and experimental results is compiled. First, an account of the calculations anticipating an electronic band structure suitable for optoelectronics and thermoelectric applications in monolayer form and a topological semimetal in few-layer form is given. Second, the different approaches to produce antimonene-mechanical and liquid phase exfoliation, and epitaxial growth methods-are reviewed. In addition, this work also reports the main characterization techniques used to study this exotic material. This review provides insights for further exploring the appealing properties of antimonene and puts forward the opportunities and challenges for future applications from (opto)electronic device fabrication to biomedicine.

Noncovalent Functionalization and Charge Transfer in Antimonene

Abstract Antimonene, a novel group 15 two‐dimensional material, is functionalized with a tailormade perylene bisimide through strong van der Waals interactions. The functionalization process leads to a significant quenching of the perylene fluorescence, and surpasses that observed for either graphene or black phosphorus, thus allowing straightforward characterization of the flakes by scanning Raman microscopy. Furthermore, scanning photoelectron microscopy studies and theoretical calculations reveal a remarkable charge‐transfer behavior, being twice that of black phosphorus. Moreover, the excellent stability under environmental conditions of pristine antimonene has been tackled, thus pointing towards the spontaneous formation of a sub‐nanometric oxide passivation layer. DFT calculations revealed that the noncovalent functionalization of antimonene results in a charge‐transfer band gap of 1.1 eV.

High resolution atomic force microscopy of double-stranded RNA

Double-stranded (ds) RNA mediates the suppression of specific gene expression, it is the genetic material of a number of viruses, and a key activator of the innate immune response against viral infections. The ever increasing list of roles played by dsRNA in the cell and its potential biotechnological applications over the last decade has raised an interest for the characterization of its mechanical properties and structure, and that includes approaches using Atomic Force Microscopy (AFM) and other single-molecule techniques. Recent reports have resolved the structure of dsDNA with AFM at unprecedented resolution. However, an equivalent study with dsRNA is still lacking. Here, we have visualized the double helix of dsRNA under near-physiological conditions and at sufficient resolution to resolve the A-form sub-helical pitch periodicity. We have employed different high-sensitive force-detection methods and obtained images with similar spatial resolution. Therefore, we show here that the limiting factors for high-resolution AFM imaging of soft materials in liquid medium are, rather than the imaging mode, the force between the tip and the sample and the sharpness of the tip apex.

Magnetic Force Microscopy in Liquids.

In this work, the use of magnetic force microscopy (MFM) to acquire images of magnetic nanostructures in liquid environments is presented. Optimization of the MFM signal acquisition in liquid media is performed and it is applied to characterize the magnetic signal of magnetite nanoparticles. The ability for detecting magnetic nanostructures along with the well-known capabilities of atomic force microscopy in liquids suggests potential applications in fields such as nanomedicine, nanobiotechnology, or nanocatalysis.

Antimonene: Mechanical Isolation of Highly Stable Antimonene under Ambient Conditions (Adv. Mater. 30/2016)

On page 6332, J. Gómez-Herrero, F. Zamora, and co-workers describe the isolation of antimonene, a new allotrope of antimony that consists of a single layer of atoms. They obtain antimonene flakes by the scotch tape method; these flakes are highly stable in ambient conditions and even when immersed in water. The 1.2 eV gap calculated in this study suggests potential applications in optoelectronics.