Pablo Galindo-Moreno

Implant success, survival, and failure: the International Congress of Oral Implantologists (ICOI) Pisa Consensus Conference.

The primary function of a dental implant is to act as an abutment for a prosthetic device, similar to a natural tooth root and crown. Any success criteria, therefore, must include first and foremost support of a functional prosthesis. In addition, although clinical criteria for prosthetic success are beyond the scope of this article, patient satisfaction with the esthetic appearance of the implant restoration is necessary in clinical practice. The restoring dentist designs and fabricates a prosthesis similar to one supported by a tooth, and as such often evaluates and treats the dental implant similarly to a natural tooth. Yet, fundamental differences in the support system between these entities should be recognized. The purpose of this article is to use a few indices developed for natural teeth as an index that is specific for endosteal root-form implants. This article is also intended to update and upgrade what is purported to be implant success, implant survival, and implant failure. The Health Scale presented in this article was developed and accepted by the International Congress of Oral Implantologists Consensus Conference for Implant Success in Pisa, Italy, October 2007.

Acute Myocardial Infarct Size Is Related to Periodontitis Extent and Severity

Cardiovascular disease has been associated with 40% of deaths in high-income countries and 28% in lower-income countries. The relationship between periodontitis and acute myocardial infarction is well documented, but it has not been established whether the extent and severity of periodontitis influence the infarct size. This cross-sectional and analytic study was designed to investigate the association of chronic periodontitis extent and severity with acute myocardial infarct size as indicated by serum cardiac troponin I and myoglobin levels. Sociodemographic, periodontal, cardiologic, and hematologic variables were gathered in 112 consecutive patients with myocardial infarction. The extent (Arbes Index) and severity (Periodontal Inflammatory Severity Index) of the chronic periodontitis were significantly associated with troponin I levels after controlling for sociodemographic and clinical confounders (change in R2 = .041, p < .02, and R2 = .031, p = .04). However, only the extent index accounted for levels of myoglobin (change in R2 = .030, p < .05), total leukocytes (change in R2 = .041 p < .02), and neutrophils (change in R2 = .059, p < .01). Mediated regression analysis showed that leukocytes and neutrophils may underlie these observed relationships of chronic periodontitis with troponin I and myoglobin. To our knowledge, this study contributes the first research data demonstrating that the extent and severity of periodontitis is positively associated with acute myocardial infarct size as measured by serum troponin I and myoglobin levels.

Implant Surface Treatment Using Biomimetic Agents

With an attempt at achieving faster osseointegration to hasten the overall treatment process, the use of biomimetic agents represents a growing area of research in implant dentistry. This study outlines 4 categories of bioactive agents that may be applied to coat the titanium implant surface: (1) biocompatible ceramics, (2) bioactive proteins, (3) ions, and (4) polymers, and their respective importance in the early stages of osseointegration. The potential bioactive agents investigated include bone morphogenetic proteins, growth factors, type I collagen, RGD peptide, fluoride, or chitosan, among others. The ideal characteristics that biomimetic agents should uphold and factors that may influence their effectiveness are reviewed. They include implant surface texture, time-oriented delivery vehicleand the ability of the agent to reach a target. Some of these agents, such as bioceramics (calcium phosphate salts) or ions (fluoride) are already commercially available and have shown clinical success. Others such as bone morphogenetic proteins are very promising, with an excellent therapeutic potential. A specific implant surface coating may enhance the percentage of bone-to-implant contact as well as speed of osseointegration that allows clinicians to overcome many challenging clinical scenarios.

Clinical and histologic comparison of two different composite grafts for sinus augmentation: a pilot clinical trial

BACKGROUND AND OBJECTIVES Sinus augmentation is a procedure used for augmenting insufficient bone height that is often observed in the maxillary posterior areas. Many different techniques as well as bone graft regimens have been suggested for performing this procedure. It was the goal of this study to compare, clinically and histologically, two different composite grafting regimens used for sinus augmentation. MATERIAL AND METHODS Five patients, needing a bilateral sinus augmentation to allow implant placement, were recruited for this study. Right sinuses were grafted with cortical bone (collected from overlying the sinus membrane) and bovine hydroxyapatite (HA), while the left side sinuses were grafted with overlying autologous bone plus a bioglass (BG) material. Bone core biopsies were taken at 6 months after sinus graft or at the time of implant insertion. A waiting period of 6 additional months was granted to allow healing, before prosthetic restoration and functional loading. The level of peri-implant bone was evaluated 12 months after loading. A comparative histomorphometric analysis was conducted and a statistical analysis was performed. RESULTS All implants in both groups were functional after a 12-month loading period. No bone loss was observed radiographically or clinically in both groups. Histologic analysis revealed that both composite grafts had a high biocompatibility. In the bovine HA-containing group, minimal xenogenic graft absorption was noted. In contrast, BG group samples presented a high absorption rate with some remaining particles imbedded in new normal bone. CONCLUSIONS Sinus augmentation using a combination of autogenous bone plus either bovine HA or BG is a predictable technique.

Role of wettability and nanoroughness on interactions between osteoblast and modified silicon surfaces.

Development of new biomaterials is a constant in regenerative medicine. A biomaterials surface properties, such as wettability, roughness, surface energy, surface charge, chemical functionalities and composition, are determinants of cell adhesion and subsequent tissue behavior. Thus, the main aim of this study was to analyze the correlation between changes in wettability without topographical variation and the response of osteoblast-like cells. For this purpose oxidized silicon surfaces were methylated to different degrees. Additionally, the influence of nanoroughness, and the subsequent effect of hysteresis on cell behavior, was also analyzed. In this case oxidized silicon pieces were etched with caustic solutions to produce different degrees of nanoroughness. Axisymmetric drop-shape analysis and atomic force microscopy confirmed that the proposed surface treatments increased the nanometer roughness and/or the water contact angles. MG-63 osteoblast-like cells were cultured on the altered surfaces to study proliferation, and for ultrastructural analysis and immunocytochemical characterization. Increasing the nanometer surface roughness or water contact angle enhanced osteoblast behavior in terms of cell morphology, proliferation and immunophenotype, the effect provoked by methylation being more significant than that caused by nanoroughness.

Are Short Dental Implants (<10 mm) Effective? A Meta-Analysis on Prospective Clinical Trials

BACKGROUND This study aims to compare the survival rate of short (<10 mm) and standard (≥10 mm) rough-surface dental implants under functional loading. METHODS An electronic literature search using PubMed and Medline databases was conducted. Prospective clinical human trials, published in English from January 1997 to July 2011, that examined dental implants of <10 mm with a 12-month follow-up were included in this meta-analysis. The following data were retrieved from the included articles: the number of implants, implant dimensions, implant locations, types of prostheses, follow-up periods, and implant survival rates. Kaplan-Meier survival estimates and the hazard rates were analyzed and compared between short and standard implants. RESULTS Thirteen studies were selected, examining 1,955 dental implants, of which 914 were short implants. Short dental implants had an estimated survival rate of 88.1% at 168 months, when standard dental implants had a similar estimated survival rate of 86.7% (P = 0.254). The peak failure rate of short dental implants was found to occur between 4 and 6 years of function. This occurred at an earlier time point compared with standard dental implants, where the peak failure rate occurred between 6 and 8 years of function. CONCLUSIONS This study shows that in the long term, implants of <10 mm are as predictable as longer implants. However, they fail at an earlier stage compared with standard implants.

The Influence of the Bucco-Palatal Distance on Sinus Augmentation Outcomes

BACKGROUND Maxillary sinus augmentation is one of the most reliable implant site development options to increase vertical bone height. However, graft consolidation requires adequate angiogenesis and migration of cells involved in osteogenesis and bone remodeling. It is speculated that these biologic events are greatly determined by the dimensions of the maxillary sinus cavity. Hence, the purpose of this study is to assess the influence of the distance from the lateral to the medial wall of the maxillary sinus on the outcomes of sinus augmentation procedures. METHODS A total of 25 patients in need of sinus augmentation were recruited for the study. After initial examination, customized radiographic and surgical guides were fabricated and a cone-beam computerized tomography scan was obtained per patient. The bucco-palatal distance (BPD) was measured at 8, 10, and 12 mm from the alveolar crest. Sinus grafting was performed by a lateral window approach using a particulated allograft material. Patients were followed-up for 6 months. At the time of implant placement, bone core biopsies were harvested using the radiographic-surgical guide. Sections of the bone cores at 8, 10, and 12 mm from the alveolar crest were histomorphometrically analyzed. The proportion of vital bone (%VB) was correlated with the BPD using a statistical model. RESULTS Twenty-one patients underwent sinus augmentation for a total of 24 sinuses; however, the data analyzed contained only one sinus per patient. One sinus developed an infection after grafting, resulting in a 96% success rate for the sinus grafting procedure. Twenty sinuses were used in the final statistical analysis. Histomorphometric analysis revealed that mean %VB was 22.71 +/- 19.08, mean percent of remaining allograft was 23.39 +/- 20.85, and average percent of non-mineralized connective tissue was 53.90 +/- 13.23. Analysis of the correlation between %VB and BPD by linear regression, using the actual values of BPD showed a strong negative association (R(2) = 0.141; P <0.001). CONCLUSION The findings suggest that the %VB formation after maxillary sinus augmentation is inversely proportional to the sinus BPD.

Sclerostin antibody stimulates bone regeneration after experimental periodontitis

The reconstruction of large osseous defects due to periodontitis is a challenge in regenerative therapy. Sclerostin, secreted by osteocytes, is a key physiological inhibitor of osteogenesis. Pharmacologic inhibition of sclerostin using sclerostin‐neutralizing monoclonal antibody (Scl‐Ab) thus increases bone formation, bone mass and bone strength in models of osteopenia and fracture repair. This study assessed the therapeutic potential of Scl‐Ab to stimulate alveolar bone regeneration following experimental periodontitis (EP). Ligature‐induced EP was induced in rats to generate localized alveolar bone defects. Following 4 weeks of disease induction, Scl‐Ab (+EP) or vehicle (+/− EP) were systemically delivered, twice weekly for up to 6 wks to determine the ability of Scl‐Ab to regenerate bone around tooth‐supporting osseous defects. 3 and 6 wks after the initiation of Scl‐Ab or vehicle treatment, femur and maxillary jawbones were harvested for histology, histomorphometry, and micro‐computed tomography (micro‐CT) of linear alveolar bone loss (ABL) and volumetric measures of bone support, including bone volume fraction (BVF) and tissue mineral density (TMD). Serum was analyzed to examine bone turnover markers during disease and regenerative therapy. Vehicle + EP animals exhibited maxillary bone loss (BVF, TMD and ABL) at ligature removal and thereafter. 6 weeks of Scl‐Ab significantly improved maxillary bone healing, as measured by BVF, TMD and ABL, when compared to vehicle + EP. After 6 weeks of treatment, BVF and TMD values in the Scl‐Ab + EP group were similar to those of healthy controls. Serum analysis demonstrated higher levels of bone formation markers osteocalcin and PINP in Scl‐Ab treatment groups. Scl‐Ab restored alveolar bone mass following experimental periodontitis. These findings warrant further exploration of Scl‐Ab therapy in this and other oral bone defect disease scenarios.

Marginal bone loss as success criterion in implant dentistry: beyond 2 mm.

AIM The aim of this study was to analyze marginal bone loss (MBL) rates around implants to establish the difference between physiological bone loss and bone loss due to peri-implantitis. MATERIALS AND METHODS Five hundred and eight implants were placed in the posterior maxilla in 208 patients. Data were gathered on age, gender, bone substratum (grafted or pristine), prosthetic connection, smoking and alcohol habits, and previous periodontitis. MBL was radiographically analyzed in three time frames (5 months post-surgery and at 6 and 18 months post-loading). Nonparametric receiver operating curve (ROC) analysis and mixed linear model analysis were used to determine whether implants could be classified as high or low bone loser type (BLT) and to establish the influence of this factor on MBL rates. RESULTS Marginal bone loss rates were significantly affected by BLT, connection type, bone substratum, and smoking. Bone loss rates at 18 months were associated with initial bone loss rates: 96% of implants with an MBL of >2 mm at 18 months had lost 0.44 mm or more at 6 months post-loading. CONCLUSION Implants with increased MBL rates at early stages (healing and immediate post-loading periods) are likely to reach MBL values that compromise their final outcome. Initial (healing, immediate post-loading) MBL rates around an implant of more than 0.44 mm/year are an indication of peri-implant bone loss progression.

Histomorphometric comparison of maxillary pristine bone and composite bone graft biopsies obtained after sinus augmentation

INTRODUCTION Sinus grafting is a technique oriented to facilitate implant placement in posterior atrophic maxillae. Several modifications of the original technique and a wide variety of materials have been proposed; most of them associated with implant survival rates. However, the quality of the bone obtained after the application of certain grafting materials has not been fully elucidated yet. The aims of this multicenter study were to analyse histomorphometrical samples obtained 6 months after sinus grafting using a composite graft consisting of anorganic bovine bone (ABB)+ autologous bone (AB), and to compare these samples with maxillary pristine bone biopsies. MATERIAL AND METHODS Ninety maxillary sinus augmentations were performed for delayed implant placement (N = 90) in 45 consecutive patients (test group). Bone cores were harvested 6 months after grafting for histomorphometric and ultrastructural study. Control pristine bone biopsies were taken from the posterior maxilla of 10 patients (control). Bone radiographic changes were assessed up to 24 months after implant loading. RESULTS The total mean values after analysis of test cores revealed a proportion of 46.08 + or - 16.6% of vital bone, 42.27 + or - 15.1% of non-mineralized connective tissue, and 37.02 + or - 25.1% of the remaining ABB particles. Significant bone remodeling activities were noticed in sinus grafting samples when compared with pristine bone. A statistically significant difference was observed in the number of osteoid lines between two groups, with higher values in the test one (15.1 + or - 11.48% vs. 2.5 + or - 2.2%, P = 0.0005). Ultrastructural study showed that vital trabecular bone was in intimal contact with ABB particles. Radiographic analysis revealed that the higher the proportion of remaining ABB, the lower the total vertical resorption of the graft. CONCLUSION Sinus grafting constitutes an excellent model for the study of de novo bone formation patterns and graft consolidation, when a combination of different bone substitutes is applied. The combination of ABB+AB yields highly satisfactory outcomes from both a clinical and a histologic perspective.