Pamela Twu

Selective extraction of emerging contaminants from water samples by dispersive liquid–liquid microextraction using functionalized ionic liquids

Functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion were used as extraction solvents in dispersive liquid-liquid microextraction (DLLME) for the extraction of 14 emerging contaminants from water samples. The extraction efficiencies and selectivities were compared to those of an in situ IL DLLME method which uses an in situ metathesis reaction to exchange 1-butyl-3-methylimidazolium chloride (BMIM-Cl) to 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf(2)). Compounds containing tertiary amine functionality were extracted with high selectivity and sensitivity by the 1-(6-amino-hexyl)-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (HNH(2)MPL-FAP) IL compared to other FAP-based ILs and the BMIM-NTf(2) IL. On the other hand, polar or acidic compounds without amine groups exhibited higher enrichment factors using the BMIM-NTf(2) IL. The detection limits for the studied analytes varied from 0.1 to 55.1 μg/L using the traditional IL DLLME method with the HNH(2)MPL-FAP IL as extraction solvent, and from 0.1 to 55.8 μg/L using in situ IL DLLME method with BMIM-Cl+LiNTf(2) as extraction solvent. A 93-fold decrease in the detection limit of caffeine was observed when using the HNH(2)MPL-FAP IL compared to that obtained using in situ IL DLLME method. Real water samples including tap water and creek water were analyzed with both IL DLLME methods and yielded recoveries ranging from 91% to 110%.

Thermochemical investigations of solute transfer into ionic liquid solvents: updated Abraham model equation coefficients for solute activity coefficient and partition coefficient predictions

Experimental data have been compiled from the published chemical and engineering literature pertaining to the infinite dilution activity coefficients, gas solubilities and chromatographic retention factors for solutes dissolved in ionic liquid (IL) solvents. Chromatographic retention factors for 45 solutes on a 1-butyl-1-methylpyrrolidinium tricyanomethanide IL gas–liquid chromatographic stationary phase are included in the compilation. The published experimental data were converted to gas-to-IL and water-to-IL partition coefficients and correlated with the ion-specific equation coefficient version of the Abraham general solvation model. Ion-specific equation coefficients were calculated for 40 different cations and 16 different anions. The calculated ion-specific equation coefficients describe the experimental gas-to-IL and water-to-IL partition coefficient data to within 0.123 and 0.149 log units, respectively.

Evaluating the solvation properties of functionalized ionic liquids with varied cation/anion composition using the solvation parameter model

Ionic liquids (ILs) are promising gas chromatography (GC) stationary phases due to their high thermal stability, negligible vapor pressure, and ability to solvate a broad range of analytes. The tunability of ILs allows for structure modification in pursuit of enhanced separation selectivity and control of analyte elution order. In this study, the solvation parameter model is used to characterize the solvation interactions of fifteen ILs containing various cationic functional groups (i.e., dimethylamino, hydroxyl, and ether) and cation types paired with various counter anions, namely, tris(pentafluoroethyl)trifluorophosphate (FAP(-)), bis[(trifluoromethyl)sulfonyl]imide (NTf(2)(-)), thiocyanate (SCN(-)), tricyanomethide (C(CN)(3)(-)), tetracyanoborate (B(CN)(4)(-)), and bis[oxalate(2-)]borate (BOB(-)). The presence of functional groups affected the hydrogen bond basicity, hydrogen bond acidity, as well as dispersion interactions of the resulting ILs, while the change of cation type yielded modest influence on the dipolarity. The switch of counter anions in unfunctionalized ILs produced compounds with higher dipolarity and hydrogen bond basicity. The dipolarity and hydrogen bond basicity of ILs possessing cyano-containing anions appeared to be inversely proportional to the cyano content of the anion. The modification of IL structure resulted in a significant effect on the retention behavior as well as separation selectivity for many solutes, including reversed elution orders of some analytes. This study provides one of the most comprehensive examinations up-to-date on the relation between IL structure and the resulting solvation characteristics and gives tremendous insight into choosing suitable ILs as GC stationary phases for solute specific separations.

Correlation of the Solubilizing Abilities of 1-Butyl-1-methylpiperidinium Bis(trifluoromethylsulfonyl)imide and 1-Butyl-1-methylpyrrolidinium Tetracyanoborate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrrolidinium tetracyanoborate ([BMPyrr]+[B(CN)4]−) and 1-butyl-1-methyl-piperidinium bis(trifluoromethylsulfonyl)imide ([BMPip]+[Tf2N]−) stationary phases at 323 K and 353 K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. Both sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log10K) and water-to-IL (log10P) partition coefficient data to within average standard deviations of about 0.10 and 0.15 log10 units, respectively.

Correlation of the Solubilizing Abilities of 1-Butyl-1-methyl-pyrrolidinium Tris(pentafluoroethyl)trifluorophosphate, 1-Butyl-1-methylpyrrolidinium Triflate and 1-Methoxyethyl-1-methylmorpholinium Tris(pentafluoroethyl)trifluorophosphate

Chromatographic retention data were measured for a wide range of organic solutes on 1-butyl-1-methylpyrolidinium tris(pentafluoroethyl)trifluorophosphate ([BMPyrr]+[FAP]−), 1-butyl-1-methylpyrrolidinium triflate, ([BMPyrr]+[Trif]−), and 1-methoxyethyl-1-methylmorpholinium tris(pentafluoroethyl)trifluorophosphate, ([MeoeMMorp]+[FAP]−), stationary phases at (323, 353 and 383) K. The measured retention factors were combined with published infinite dilution activity coefficient and gas-to-water partition coefficient data to yield gas-to-anhydrous ionic liquid (IL) and water-to-anhydrous IL partition coefficients. The three sets of partition coefficients were analyzed using the Abraham model. The derived Abraham model correlations describe the observed gas-to-IL (log10K) and water-to-IL (log10P) partition coefficient data to within average standard deviations of about 0.11 and 0.15 log10 units, respectively.

Determination of the solubilising character of 2-methoxyethyl-(dimethyl)ethylammonium tris(pentafluoroethyl)trifluorophosphate based on the Abraham solvation parameter model

Abstract Gas–liquid chromatographic retention factors have been measured for 42 different organic probes on a 2-methoxyethyl(dimethyl)ethylammonium tris(pentafluoroethyl)trifluorophosphate, ([MeoeM2EAm]+[FAP]–), stationary phase capillary column at 323 and 353 K. The measured retention factors were combined with published gas-to-liquid partition coefficient data for solutes dissolved in ([MeoeM2EAm]+[FAP]–) and with published gas-to-water partition coefficient data to yield 107 gas-to-anhydrous ionic liquid and 105 water-to-anhydrous ionic liquid partition coefficients. Abraham model correlations for describing solute transfer into ([MeoeM2EAm]+[FAP]–) were derived from the three sets of experimental partition coefficient data. The derived correlations back-calculated the experimental gas-to-([MeoeM2EAm]+[FAP]–) and water-to-([MeoeM2EAm]+[FAP]–) partition coefficient data to within 0.13 and 0.15 log units, respectively.