Panpan Jing

Efficient photocatalytic degradation of acid fuchsin in aqueous solution using separate porous tetragonal-CuFe2O4 nanotubes

To develop a new promising magnetic photocatalyst, homogeneous tetragonal-CuFe2O4 (t-CuFe2O4) nanotubes were successfully synthesized via the electrospinning technique followed by heating treatment. The detailed investigation of chemical phase and microstructure reveals that the obtained samples are inversely spinel CuFe2O4 nanotubes with an average diameter of about 272±2nm, which are assembled by numerous CuFe2O4 single crystal nanoparticles with regular polyhedron structure and possess a very outstanding porous feature. Furthermore, element mapping, UV-vis adsorption spectrum, N2 adsorption-desorption isotherm, and magnetic hysteresis loop indicate that these t-CuFe2O4 nanotubes have uniform component distribution, strong light response in the range of 200 nm-800 nm, considerable specific surface area of 12.8 m(2)/g and porosity of 15.5 nm, and enough magnetization of about 18 emu/g. Therefore, the t-CuFe2O4 nanotubes show an excellent catalytic activity and durability for the photodecomposition of acid fuchsin dye in aqueous solution under a simulated sunlight source. Furthermore, these CuFe2O4 nanotubes could be acted as an eco-friendly and recyclable photocatalyst because they can be efficiently separated from the residual solution. Finally, a mechanism is presented for the significant photocatalytic performance of the porous CuFe2O4 nanotubes.

Width-controlled M-type hexagonal strontium ferrite (SrFe12O19) nanoribbons with high saturation magnetization and superior coercivity synthesized by electrospinning.

Width-controlled M-type hexagonal SrFe12O19 nanoribbons were synthesized for the first time via polyvinylpyrrolidone (PVP) sol assisted electrospinning followed by heat treatment in air, and their chemical composition, microstructure and magnetic performance were investigated. Results demonstrated that as-obtained SrFe12O19 nanoribbons were well-crystallized with high purity. Each nanoribbon was self-assembled by abundant single-domain SrFe12O19 nanoparticles and was consecutive on structure and uniform on width. PVP in the spinning solution played a significant influence on the microstructure features of SrFe12O19 nanoribbons. With PVP concentration increasing, the ribbon-width was increased but the particle-size was reduced, which distributed on a same ribbon were more intensive, and then the ribbon-surface became flat. The room temperature magnetic performance investigation revealed that considerable large saturation magnetization (Ms) and coercivity (Hc) were obtained for all SrFe12O19 nanoribbons, and they increased with the ribbon-width broadening. The highest Ms of 67.9 emu·g−1 and Hc of 7.31 kOe were concurrently acquired for SrFe12O19 nanoribbons with the maximum ribbon-width. Finally, the Stoner-Wohlfarth curling model was suggested to dominate the magnetization reverse of SrFe12O19 nanoribbons. It is deeply expected that this work is capable of opening up a new insights into the architectural design of 1D magnetic materials and their further utilization.

Hierarchical SrTiO3/NiFe2O4 composite nanostructures with excellent light response and magnetic performance synthesized toward enhanced photocatalytic activity

Being capable of gathering advanced optical, electrical and magnetic properties originating from different components, multifunctional composite nanomaterials have been of concern increasingly. Herein, we have successfully demonstrated the preparation of SrTiO3/NiFe2O4 porous nanotubes (PNTs) and SrTiO3/NiFe2O4 particle-in-tubes (PITs) via a single-spinneret electrospinning and a side-by-side-spinneret electrospinning, respectively. The products were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-visible diffuse reflectance spectra and a vibrating sample magnetometer in detail. The results indicate that SrTiO3/NiFe2O4 PNTs are the heterojunction nanotubes by connecting perovskite SrTiO3 and spinel NiFe2O4 nanoparticles, but SrTiO3/NiFe2O4 PITs are the self-assembled core/shell structures by embedding SrTiO3 nanoparticles into NiFe2O4 nanotubes. Compared with pure SrTiO3 nanofibers, the two SrTiO3/NiFe2O4 composites exhibit a powerful light response and excellent room temperature ferromagnetism. The magnetic separations directly reveal that such amazing recycling efficiencies of about 95% for SrTiO3/NiFe2O4 PNTs and about 99.5% for SrTiO3/NiFe2O4 PITs are obtained. Furthermore, both the magnetic composites perform considerable photocatalytic activity in the degradation of rhodamine B. We propose that Kirkendall-diffusion and phase-separation are probably responsible for the formation of SrTiO3/NiFe2O4 PITs, and this work could provide a feasible way to assemble the core/shell structures of different materials.

High saturation magnetization of γ-Fe2O3 nano-particles by a facile one-step synthesis approach.

We have demonstrated the synthesis of γ-Fe2O3 nano-particles through a facile and novel calcination process in the air. There is no pH regulation, gas atmosphere, additive, centrifugation or other complicated procedures during the preparing process. A detailed formation process of the nano-particles is proposed, and DMF as a polar solvent may slower the reaction process of calcination. The structures, morphologies, and magnetic properties of γ-Fe2O3 nano-particles were investigated systematically, and the pure γ-Fe2O3 nano-particles obtained at 200 °C display uniform morphology good magnetic property. The saturation magnetization of obtained pure γ-Fe2O3 is about 74 emu/g, which is comparable with bulk material (76 emu/g) and larger than other results. In addition, the photocatalytic activity for degradation of methylene blue is also studied, which shows proper photocatalytic activity.

Dependence of phase configurations, microstructures and magnetic properties of iron-nickel (Fe-Ni) alloy nanoribbons on deoxidization temperature in hydrogen

Iron-nickel (Fe-Ni) alloy nanoribbons were reported for the first time by deoxidizing NiFe2O4 nanoribbons, which were synthesized through a handy route of electrospinning followed by air-annealing at 450 °C, in hydrogen (H2) at different temperatures. It was demonstrated that the phase configurations, microstructures and magnetic properties of the as-deoxidized samples closely depended upon the deoxidization temperature. The spinel NiFe2O4 ferrite of the precursor nanoribbons were firstly deoxidized into the body-centered cubic (bcc) Fe-Ni alloy and then transformed into the face-centered cubic (fcc) Fe-Ni alloy of the deoxidized samples with the temperature increasing. When the deoxidization temperature was in the range of 300 ~ 500 °C, although each sample possessed its respective morphology feature, all of them completely reserved the ribbon-like structures. When it was further increased to 600 °C, the nanoribbons were evolved completely into the fcc Fe-Ni alloy nanochains. Additionally, all samples exhibited typical ferromagnetism. The saturation magnetization (Ms) firstly increased, then decreased, and finally increased with increasing the deoxidization temperature, while the coercivity (Hc) decreased monotonously firstly and then basically stayed unchanged. The largest Ms (~145.7 emu·g−1) and the moderate Hc (~132 Oe) were obtained for the Fe-Ni alloy nanoribbons with a mixed configuration of bcc and fcc phases.