Paolo Lacovig

Dual Path Mechanism in the Thermal Reduction of Graphene Oxide

Graphene is easily produced by thermally reducing graphene oxide. However, defect formation in the C network during deoxygenation compromises the charge carrier mobility in the reduced material. Understanding the mechanisms of the thermal reactions is essential for defining alternative routes able to limit the density of defects generated by carbon evolution. Here, we identify a dual path mechanism in the thermal reduction of graphene oxide driven by the oxygen coverage: at low surface density, the O atoms adsorbed as epoxy groups evolve as O(2) leaving the C network unmodified. At higher coverage, the formation of other O-containing species opens competing reaction channels, which consume the C backbone. We combined spectroscopic tools and ab initio calculations to probe the species residing on the surface and those released in the gas phase during heating and to identify reaction pathways and rate-limiting steps. Our results illuminate the current puzzling scenario of the low temperature gasification of graphene oxide.

Transfer-Free Electrical Insulation of Epitaxial Graphene from its Metal Substrate

High-quality, large-area epitaxial graphene can be grown on metal surfaces, but its transport properties cannot be exploited because the electrical conduction is dominated by the substrate. Here we insulate epitaxial graphene on Ru(0001) by a stepwise intercalation of silicon and oxygen, and the eventual formation of a SiO(2) layer between the graphene and the metal. We follow the reaction steps by X-ray photoemission spectroscopy and demonstrate the electrical insulation using a nanoscale multipoint probe technique.

Angle-resolved photoemission spectroscopy and imaging with a submicrometre probe at the SPECTROMICROSCOPY-3.2L beamline of Elettra

The extensive upgrade of the experimental end-station of the SPECTROMICROSCOPY-3.2L beamline at Elettra synchrotron light source is reported. After the upgrade, angle-resolved photoemission spectroscopy from a submicrometre spot and scanning microscopy images monitoring the photoelectron signal inside selected acquisition angle and energy windows can be performed. As a test case, angle-resolved photoemission spectroscopy from single flakes of highly oriented pyrolitic graphite and imaging of the flakes with image contrast owing to rotation of the band dispersion of different flakes are presented.

Local Electronic Structure and Density of Edge and Facet Atoms at Rh Nanoclusters Self-Assembled on a Graphene Template

The chemical and physical properties of nanoclusters largely depend on their sizes and shapes. This is partly due to finite size effects influencing the local electronic structure of the nanocluster atoms which are located on the nanofacets and on their edges. Here we present a thorough study on graphene-supported Rh nanocluster assemblies and their geometry-dependent electronic structure obtained by combining high-energy resolution core level photoelectron spectroscopy, scanning tunneling microscopy, and density functional theory. We demonstrate the possibility to finely control the morphology and the degree of structural order of Rh clusters grown in register with the template surface of graphene/Ir(111). By comparing measured and calculated core electron binding energies, we identify edge, facet, and bulk atoms of the nanoclusters. We describe how small interatomic distance changes occur while varying the nanocluster size, substantially modifying the properties of surface atoms. The properties of under-coordinated Rh atoms are discussed in view of their importance in heterogeneous catalysis and magnetism.

Energetics and Hierarchical Interactions of Metal–Phthalocyanines Adsorbed on Graphene/Ir(111)

The adsorption of metal-phthalocyanine (MPc) layers (M = Fe, Co, Cu) assembled on graphene/Ir(111) is studied by means of temperature-programmed X-ray photoemission spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS). The balance between interaction forces among the organometallic molecules and the underlying graphene gives rise to flat-lying molecular layers, weakly interacting with the underlying graphene. Further MPc layers pile up face-on onto the first layer, up to a few nanometers thickness, as deduced by NEXAFS. The FePc, CoPc, and CuPc multilayers present comparable desorption temperatures, compatible with molecule-molecule interactions dominated by van der Waals forces between the π-conjugated macrocycles. The MPc single layers desorb from graphene/Ir at higher temperatures. The CuPc single layer desorbs at lower temperature than the FePc and CoPc single layers, suggesting a higher adsorption energy of the FePc and CoPc single layers on graphene/Ir with respect to CuPc, with increasing molecule-substrate interaction in the order E(CuPc) < E(FePc) ~ E(CoPc).

Unveiling the Mechanisms Leading to H2 Production Promoted by Water Decomposition on Epitaxial Graphene at Room Temperature.

By means of a combination of surface-science spectroscopies and theory, we investigate the mechanisms ruling the catalytic role of epitaxial graphene (Gr) grown on transition-metal substrates for the production of hydrogen from water. Water decomposition at the Gr/metal interface at room temperature provides a hydrogenated Gr sheet, which is buckled and decoupled from the metal substrate. We evaluate the performance of Gr/metal interface as a hydrogen storage medium, with a storage density in the Gr sheet comparable with state-of-the-art materials (1.42 wt %). Moreover, thermal programmed reaction experiments show that molecular hydrogen can be released upon heating the water-exposed Gr/metal interface above 400 K. The Gr hydro/dehydrogenation process might be exploited for an effective and eco-friendly device to produce (and store) hydrogen from water, i.e., starting from an almost unlimited source.

Epitaxial Growth of a Single-Domain Hexagonal Boron Nitride Monolayer

We investigate the structure of epitaxially grown hexagonal boron nitride (h-BN) on Ir(111) by chemical vapor deposition of borazine. Using photoelectron diffraction spectroscopy, we unambiguously show that a single-domain h-BN monolayer can be synthesized by a cyclic dose of high-purity borazine onto the metal substrate at room temperature followed by annealing at T=1270 K, this method giving rise to a diffraction pattern with 3-fold symmetry. In contrast, high-temperature borazine deposition (T=1070 K) results in a h-BN monolayer formed by domains with opposite orientation and characterized by a 6-fold symmetric diffraction pattern. We identify the thermal energy and the binding energy difference between fcc and hcp seeds as key parameters in controlling the alignment of the growing h-BN clusters during the first stage of the growth, and we further propose structural models for the h-BN monolayer on the Ir(111) surface.

Fine tuning of graphene-metal adhesion by surface alloying

We show that bimetallic surface alloying provides a viable route for governing the interaction between graphene and metal through the selective choice of the elemental composition of the surface alloy. This concept is illustrated by an experimental and theoretical characterization of the properties of graphene on a model PtRu surface alloy on Ru(0001), with a concentration of Pt atoms in the first layer between 0 and 50%. The progressive increase of the Pt content determines the gradual detachment of graphene from the substrate, which results from the modification of the carbon orbital hybridization promoted by Pt. Alloying is also found to affect the morphology of graphene, which is strongly corrugated on bare Ru, but becomes flat at a Pt coverage of 50%. The method here proposed can be readily extended to several supports, thus opening the way to the conformal growth of graphene on metals and to a full tunability of the graphene-substrate interaction.

Bottom-up approach for the low-cost synthesis of graphene-alumina nanosheet interfaces using bimetallic alloys.

The production of high-quality graphene-oxide interfaces is normally achieved by graphene growth via chemical vapour deposition on a metallic surface, followed by transfer of the C layer onto the oxide, by atomic layer and physical vapour deposition of the oxide on graphene or by carbon deposition on top of oxide surfaces. These methods, however, come with a series of issues: they are complex, costly and can easily result in damage to the carbon network, with detrimental effects on the carrier mobility. Here we show that the growth of a graphene layer on a bimetallic Ni3Al alloy and its subsequent exposure to oxygen at 520 K result in the formation of a 1.5 nm thick alumina nanosheet underneath graphene. This new, simple and low-cost strategy based on the use of alloys opens a promising route to the direct synthesis of a wide range of interfaces formed by graphene and high-κ dielectrics.

Revealing the adsorption mechanisms of nitroxides on ultrapure, metallicity-sorted carbon nanotubes.

Carbon nanotubes are a natural choice as gas sensor components given their high surface to volume ratio, electronic properties, and capability to mediate chemical reactions. However, a realistic assessment of the interaction of the tube wall and the adsorption processes during gas phase reactions has always been elusive. Making use of ultraclean single-walled carbon nanotubes, we have followed the adsorption kinetics of NO2 and found a physisorption mechanism. Additionally, the adsorption reaction directly depends on the metallic character of the samples. Franck–Condon satellites, hitherto undetected in nanotube–NOx systems, were resolved in the N 1s X-ray absorption signal, revealing a weak chemisorption, which is intrinsically related to NO dimer molecules. This has allowed us to identify that an additional signal observed in the higher binding energy region of the core level C 1s photoemission signal is due to the C=O species of ketene groups formed as reaction byproducts . This has been supported by density functional theory calculations. These results pave the way toward the optimization of nanotube-based sensors with tailored sensitivity and selectivity to different species at room temperature.