Parameswaran Binod

Bioethanol production from rice straw: An overview

Rice straw is an attractive lignocellulosic material for bioethanol production since it is one of the most abundant renewable resources. It has several characteristics, such as high cellulose and hemicelluloses content that can be readily hydrolyzed into fermentable sugars. But there occur several challenges and limitations in the process of converting rice straw to ethanol. The presence of high ash and silica content in rice straw makes it an inferior feedstock for ethanol production. One of the major challenges in developing technology for bioethanol production from rice straw is selection of an appropriate pretreatment technique. The choice of pretreatment methods plays an important role to increase the efficiency of enzymatic saccharification thereby making the whole process economically viable. The present review discusses the available technologies for bioethanol production using rice straw.

Biological pretreatment of lignocellulosic biomass--An overview.

Pretreatment is an important step involved in the production of bioethanol from lignocelluosic biomass. Though several pretreatment regimes are available, biological pretreatment seems to be promising being an eco-friendly process and there is no inhibitor generation during the process. In the current scenario there are few limitations in using this strategy for pilot scale process. The first and foremost one is the long incubation time for effective delignification. This can be minimized to an extent by using suitable microbial consortium. There is an urgent need for research and development activities and fine tuning of the process for the development of an economically viable process. This review presents an overview of various aspects of biological pretreatment, enzymes involved in the process, parameters affecting biological pretreatment as well as future perspectives.

Dilute acid pretreatment and enzymatic saccharification of sugarcane tops for bioethanol production

The aim of this work was to study the feasibility of using sugarcane tops as feedstock for the production of bioethanol. The process involved the pretreatment using acid followed by enzymatic saccharification using cellulases and the process was optimized for various parameters such as biomass loading, enzyme loading, surfactant concentration and incubation time using Box-Behnken design. Under optimum hydrolysis conditions, 0.685 g/g of reducing sugar was produced per gram of pretreated biomass. The fermentation of the hydrolyzate using Saccharomyces cerevisae produced 11.365 g/L of bioethanol with an efficiency of about 50%. This is the first report on utilization of sugarcane tops for bioethanol production.

Formic Acid as a Potential Pretreatment Agent for the Conversion of Sugarcane Bagasse to Bioethanol

In recent years, growing attention has been focused on the use of lignocellulosic biomass as a feedstock for the production of ethanol, a possible renewable alternative to fossil fuels. Several pretreatment processes have been developed for decreasing the biomass recalcitrance, but only a few of them seem to be promising. In this study, effect of various organic solvents and organic acids on the pretreatment of sugarcane bagasse was studied. Among the different organic acids and organic solvents tested, formic acid was found to be effective. Optimization of process parameters for formic acid pretreatment was carried out. The structural changes before and after pretreatment was investigated by scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared (FTIR) analysis. The X-ray diffraction profile showed that the degree of crystallinity was more for pretreated biomass than that of untreated. The FTIR spectra shown at the stretching of hydrogen bonds of pretreated sugarcane bagasse arose at higher number. It also revealed that the cellulose content in the solid residue increased because the hemicelluloses fraction in raw materials was released by acid hydrolytic reaction.

Production and characterization of poly-3-hydroxybutyrate from crude glycerol by Bacillus sphaericus NII 0838 and improving its thermal properties by blending with other polymers

The aim of this work was to study the production of poly-3-hydroxybutyrate (PHB) under nitrogen limited conditions by Bacillus sphaericus NII 0838 using crude glycerol from biodiesel industry as sole carbon source. Effect of various process parameters on PHB production such as glycerol concentration, inoculum size and pH of the medium were optimized. Characterization of extracted PHB was carried out by FT-IR, 1H and 13C NMR. Results showed that the bacterial culture accumulated about 31% PHB in crude glycerol medium. The extracted PHB was blended with other polymers to improve its physical characteristics. The thermal properties of the polymer like melting temperature (Tm) and heat of fusion (ΔHf) were determined using DSC.

A novel surfactant-assisted ultrasound pretreatment of sugarcane tops for improved enzymatic release of sugars.

The aim of this study was to develop a novel surfactant-assisted ultrasound pretreatment of sugarcane tops as well as to optimize the effect of various operational parameters on pretreatment and hydrolysis. A novel surfactant-assisted ultrasound pretreatment was developed which could effectively remove hemicelluloses and lignin and improve the reducing sugar yield from sugarcane tops. Operational parameters for pretreatment and hydrolysis were studied and optimized. Under optimal hydrolysis conditions, 0.661 g of reducing sugar was produced per gram of pretreated biomass. The structural changes of native and pretreated biomass were investigated by Scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared analysis (FTIR). The results indicate that surfactant-assisted ultrasound pretreated sugarcane tops can be used as a potential feed stock for bioethanol production.

Hydrolysis of Lignocellulosic Biomass for Bioethanol Production

Publisher Summary There is no self-sufficient process or technology available to convert the lignocellulosic biomass to bioethanol. The whole process primarily comprises the hydrolysis of lignocellulosic structure to fermentable sugars, followed by fermentation and finally distillation of the fermented broth. This chapter focuses on hydrolysis of lignocellulosic biomass for bioethanol production. The hydrolysis of lignocellulosic material into fermentable sugars is a crucial stage, which mainly determines the overall process efficiency. Various methods are available for the generation of sugars from lignocellulosic biomass, of which the chemical and enzymatic methods have been proved to be more successful. Even though the conventional method of lignocellulosic hydrolysis using concentrated acids is an efficient process, there are several issues related to the environment, which makes one think of an alternative to replace this method with more environment friendly processes.

Energy requirement for alkali assisted microwave and high pressure reactor pretreatments of cotton plant residue and its hydrolysis for fermentable sugar production for biofuel application.

In the present work, alkali assisted microwave pretreatment (AAMP) of cotton plant residue (CPR) with high pressure reactor pretreatment was compared. Further, modeling of AAMP was attempted. AAMP, followed by enzymatic saccharification was evaluated and the critical parameters were identified to be exposure time, particle size and enzyme loading. The levels of these parameters were optimized using response surface methodology (RSM) to enhance sugar yield. AAMP of CPR (1mm average size) for 6 min at 300 W yielded solid fractions that on hydrolysis resulted in maximum reducing sugar yield of 0.495 g/g. The energy required for AAMP at 300 W for 6 min was 108 kJ whereas high pressure pretreatment (180°C, 100 rpm for 45 min) requires 5 times more energy i.e., 540 kJ. Physiochemical characterization of native and pretreated feedstock revealed differences between high pressure pretreatment and AAMP.

Evaluation of fungal culture filtrate containing chitinase as a biocontrol agent against Helicoverpa armigera

Aims:  To evaluate the biocontrol efficacy of culture filtrate containing chitinase from Trichoderma harzianum against Heliothis.

Development of a novel sequential pretreatment strategy for the production of bioethanol from sugarcane trash

A novel sequential pretreatment strategy using biodiesel industry generated waste glycerol assisted transition metal and alkali pretreatment of sugarcane trash were developed for the production of bioethanol. Various process parameters affecting pretreatment as well as hydrolysis were optimized by adopting a Taguchi design. This novel method was found to be superior when compared to conventional pretreatment strategies like acid and alkali in removing hemicelluloses and lignin and the hydrolyzate is devoid of major fermentation inhibitors like organic acids and furfurals. Physico-chemical changes of the native and the pretreated biomass were evaluated by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) analysis. Under optimized hydrolysis conditions 0.796 g of reducing sugar (pentoses and hexoses) per g of dry biomass after saccharification was produced. Fermentation of the non-detoxified hydrolyzate using Saccharomyces cerevisiae produced 31.928 g of bioethanol per g of dry biomass with an efficiency of 78.89%.