Partha Sarangi

Is MRA an unnecessary expense in the management of a clinically unstable shoulder? A comparison of MRA and arthroscopic findings in 90 patients.

Background and purpose In detection of glenoid labrum pathology, MR arthrography (MRA) has shown sensitivities of 88-100% and specificities of 89-93%. However, our practice suggested that there may be a higher frequency of falsely negative reports. We assessed the accuracy of this costly modality in practice. Patients and methods We retrospectively reviewed MRA reports of 90 consecutive patients with clinical shoulder instability who had undergone shoulder arthroscopy. All had a history of traumatic anterior shoulder dislocation and had positive anterior apprehension tests. All underwent arthroscopy and stabilization during the same procedure. We compared the findings, using arthroscopic findings as the gold standard in the identification of glenoid labrum pathology. Results 83 of the 90 patients had glenoid labrum tears at arthroscopy. Only 54 were correctly identified at MRA. All normal glenoid labra were identified at MRA. This gave a sensitivity of 65% and a specificity of 100% in identification of all types of glenoid labrum tear. 74 patients had anterior glenoid labral tears that were detected at an even lower rate of sensitivity (58%). Interpretation The sensitivity of MRA in this series was substantially lower than previously published, suggesting that MRA may not be as reliable a diagnostic imaging modality in glenohumeral instability as previously thought. Our findings highlight the importance of an accurate history and clinical examination in the management of glenohumeral instability. The need for MRA may not be as high as is currently believed.

Magnetic resonance scanning vs axillary radiography in the assessment of glenoid version for osteoarthritis

BACKGROUND Osteoarthritic shoulders are mainly associated with glenoid retroversion. Total shoulder arthroplasty with the glenoid component implanted in retroversion predisposes to loosening of the glenoid prosthesis. Correction of glenoid retroversion through anterior eccentric reaming, before glenoid component implantation, is performed to restore normal joint biomechanics. Accurate preoperative assessment is required to ascertain the degree of retroversion and calculate the degree of reaming. MATERIALS AND METHODS We assessed the utility of magnetic resonance imaging (MRI) for the assessment of glenoid version in glenohumeral osteoarthritis compared with standard plain axillary radiography (AXR). Two independent observers reviewed both types of imaging in 48 primary osteoarthritic shoulders on 2 separate occasions. RESULTS The mean glenoid version measured was -14.3° on MRI and -21.6° on AXR (mean difference, -7.36°; P < .001). Intraobserver and interobserver reliability coefficients were 0.96 and 0.9, respectively, for MRI and 0.8 and 0.71, respectively, for AXR. Glenoid retroversion was greater in 73% of AXR. CONCLUSION We demonstrated that MRI is more reproducible in the assessment of glenoid version in osteoarthritis and provides excellent intraobserver and interobserver reliability. MRI is useful for preoperative osseous imaging for total shoulder arthroplasty because it offers a more precise method of determining glenoid version compared with x-ray imaging in addition to the standard assessment of rotator cuff integrity.

The influence of rotator cuff pathology on functional outcome in total shoulder replacement

Introduction: Total shoulder replacement (TSR) is a reliable treatment for glenohumeral osteoarthritis. In addition to proper component orientation, successful arthroplasty requires accurate restoration of soft tissues forces around the joint to maximize function. We hypothesized that pathological changes within the rotator cuff on preoperative magnetic resonance imaging (MRI) adversely affect the functional outcome following TSR. Materials and Methods: A retrospective analysis of case notes and MRI of patients undergoing TSR for primary glenohumeral osteoarthritis over a 4-year period was performed. Patients were divided into three groups based upon their preoperative MRI findings: (1) normal rotator cuff, (2) the presence of tendonopathy within the rotator cuff, or (3) the presence of a partial thickness rotator cuff tear. Intra-operatively tendonopathy was addressed with debridement and partial thickness tears with repair. Functional outcome was assessed with the Oxford Shoulder Score (OSS), and quick disabilities of the arm, shoulder and hand score (quick-DASH). Results: We had a full dataset of complete case-notes, PACS images, and patient reported outcome measures available for 43 patients, 15 in group 1, 14 in group 2, and 14 in group 3. Quick-DASH and OSS were calculated at a minimum of 24 months following surgery. There was no statistically significant difference between the results obtained between the three groups of either the OSS (P = 0.45), or quick-DASH (P = 0.46). Conclusions: TSR is an efficacious treatment option for patients with primary glenohumeral osteoarthritis in the medium term, even in the presence of rotator cuff tendonopathy or partial tearing. Minor changes within the cuff do not significantly affect functional outcome following TSR.

Thermal damage during humeral reaming in total shoulder resurfacing

Introduction: Total shoulder resurfacing (TSR) provides a reliable solution for the treatment of glenohumeral arthritis. It confers a number of advantages over traditional joint replacement with stemmed humeral components, in terms of bone preservation and improved joint kinematics. This study aimed to determine if humeral reaming instruments produce a thermal insult to subchondral bone during TSR. Patients and Methods: This was tested in vivo on 13 patients (8 with rheumatoid arthritis and 5 with osteoarthritis) with a single reaming system and in vitro with three different humeral reaming systems on saw bone models. Real-time infrared thermal video imaging was used to assess the temperatures generated. Results: Synthes (Epoca) instruments generated average temperatures of 40.7°C (SD 0.9°C) in the rheumatoid group and 56.5°C (SD 0.87°C) in the osteoarthritis group (P = 0.001). Irrigation with room temperature saline cooled the humeral head to 30°C (SD 1.2°C). Saw bone analysis generated temperatures of 58.2°C (SD 0.79°C) in the Synthes (Epoca) 59.9°C (SD 0.81°C) in Biomet (Copeland) and 58.4°C (SD 0.88°C) in the Depuy Conservative Anatomic Prosthesis (CAP) reamers (P = 0.12). Conclusion: Humeral reaming with power driven instruments generates considerable temperatures both in vivo and in vitro. This paper demonstrates that a significant thermal effect beyond the 47°C threshold needed to induce osteonecrosis is observed with humeral reamers, with little variation seen between manufacturers. Irrigation with room temperature saline cools the reamed bone to physiological levels and should be performed regularly during this step in TSR.

Shoulder arthroplasty. Part 2: Normal and abnormal radiographic findings

Frequently, the decision made by general practitioners or musculoskeletal triage assessment services to refer patients for specialist review is initiated by a radiological report. Following shoulder arthroplasty it is important to ensure that any patient with asymptomatic evidence of a failing prosthesis is referred for review so that revision surgery can be contemplated and planned before the situation becomes unsalvageable. The first paper in this series described the various types of shoulder arthroplasty and indications for each. This follow-up paper will concentrate on their modes of failure and the associated radiographic features, and is aimed at radiology trainees and non-musculoskeletal specialist radiologists.

Shoulder arthroplasty. Part 1: Prosthesis terminology and classification

Shoulder arthroplasty is the third most common joint replacement procedure in the UK, and there are a number of different implant options available to surgeons to treat a variety of shoulder disorders. With an increasing burden placed on clinical follow-up, more patients are remaining under the care of their general practitioners and musculoskeletal triage assessment services and are not necessarily being seen by specialists. Referrals to orthopaedic specialists are therefore often prompted by radiological reports describing evidence of implant failure. This article is the first of two reviews on shoulder arthroplasty, concentrating on implant features and the indications for their use. The second article will address the modes of failure of shoulder arthroplasty and describe the relevant associated radiological features.

Synovial Chondromatosis of the Shoulder without Calcification on Plain Radiograph

Synovial chondromatosis is a rare metaplastic condition that comprises a proliferation of cartilaginous bodies within the synovial membrane, bursa, or tendon sheath. It is characterized by the formation of multiple cartilaginous foci within the synovium that eventually break free to form loose bodies. It is often monoarticular and most commonly affects the knee joint and, to a lesser extent, the hip, elbow, wrist and ankle joints. There have been reports of synovial chondromatosis within the shoulder joint and, less commonly, extra-articular disease within the subacromial bursa. In reported cases, there is evidence of ossification on plain radiograph, as confirmed by magnetic resonance imaging (MRI). We present a histologically confirmed case of subacromial synovial chondromatosis, with evidence to confirm the diagnosis on MRI, but without evidence of calcification visible on plain radiographs.

Nonunion of a posterior glenoid rim fracture leading to posterior subluxation

Initial dissection revealed no abnormality of the posterior capsule or the posterior labrum. However, further dissection revealed that the posterior rim fracture was mobile, avascular and had failed to heal. It was removed, and a tricortical iliac crest graft was used to repair the defect. This was cut to shape and fixed flush to the posterior glenoid surface using 2 semi-threaded cancellous screws with washers. A stable reduction was achieved and the capsule and labrum were repaired [Figure 2].

Short-term rates of radiolucency after primary total shoulder arthroplasty using a cementless metal-backed pegged polyethylene glenoid

Background Total shoulder arthroplasty has shown good clinical efficacy in treating primary and secondary degenerative conditions of the glenohumeral joint. Glenoid loosening, however, remains the commonest cause of failure. The purpose of this study was to investigate the rate of radiographic periprosthetic lucency associated with the use of an uncemented, pegged, metal-backed polyethylene glenoid component. Materials and methods A retrospective, single-centre study using the Epoca (Synthes, Paoli, Pennsylvania) metal-backed glenoid component. Operations were performed by two experienced consultant upper limb surgeons. Radiographs were analysed for immediate post-operative component seating and periprosthetic radiolucent lines at predefined regular post-operative intervals. Intra- and inter-observer reliability was assessed to improve validity of results. Results Mean age and follow-up was 72 (48–91) years and 2.5 years (2–5), respectively. Main indications for total shoulder arthroplasty were primary osteoarthritis, rheumatoid arthritis, revision for failed hemi-arthroplasty and acute fracture. Ninety-six per cent of components were completely seated post-operatively. Fifty-four (95%) of the 57 shoulders had no periprosthetic radiolucent lines at most recent follow-up. Complete post-operative glenoid seating was significantly associated with the absence of later periprosthetic radiolucency (p < 0.01). Conclusion This study reports low early radiolucency rates with the pegged, uncemented, metal-backed polyethylene glenoid prosthesis used. Excellent post-operative glenoid seating is associated with a significantly lower rate of radiolucency. Longer follow-up data are required to confirm these early promising results. Level of evidence: Therapeutic, level IV.

Bony avulsion of the medial head of triceps brachii

We describe a 69-year-old patient who presented with an isolated avulsion fracture of the medial head of triceps brachii after a fall onto her elbow. As far as we are aware, this pattern of injury has not been previously described in the literature. Our patient had no functional deficit and was managed conservatively. She was referred for physiotherapy, and discharged once her pain subsequently subsided. Although the literature favours surgical management of similar injuries, we feel that our case shows that good results may still be achieved from conservative management.